FEATURES/BENEFITS
All dimensions rounded up to the nearest 1/8" ITrue Website: www.truemfg.com IToll Free Number • 1-800-325-6152 ISpecifications subject to change without notice.
TG SerieS
TG2H-2S
TG1H-1S
• Powerfully provides holding temperatures
of 80°F to 180°F throughout the cabinet for
uniform, forced-air, heating.
• Low velocity fan(s) provided to assure even
temperature throughout cabinet. A vent is
located at the top of the cabinet for positive
humidity control.
• Heater - stainless steel for corrosion resis-
tance.
• Shelving - (3) heavy duty, chrome shelves
per section with wall mounted pilasters (3)
different interior kits available.
• 300 series stainless steel solid doors and
rainshield (the finest stainless available).
• Anodized quality aluminum sides, bottom
and back.
• Anodized aluminum interior.
• Foamed-in-place polyurethane high density
cell insulation (CFC free).
• Exterior, color coded, temperature display.
• Lifetime guaranteed recessed handles on
solid doors.
• Extruded, aluminum door frames on glass
doors.
• Door locks standard.
• Doors equipped with lifetime guaranteed
self-closing hinges with 120 degree stay
open feature standard.
• Humidity control - 12" x 20" pan standard.
• Manual humidity control is a standard fea-
ture (turn counterclockwise to ventilate).
• Incandescent interior lighting.
• Energy efficient, triple pane, thermal insu-
lated glass on glass doors.
• 6" legs standard equipment. 4" diameter
swivel castors available for single section
models only.
• Pass-thru heated cabinet designed to
be rear-loaded from prep area and front
accessed.
• Self-contained system.
Curb mountable units for TR, TA & TG series only. (5% list upcharge)
reaCh-inheateD Cabinets
Model
Swing
Doors
Cu.
Ft. Watts
Crated
Weight
Cabinet Dimensions
L D† H*
SOLID DOORS
TG1H-1S ‡ 1 s/s 31 2000 350 29 x 34
3
/
4
x 78
1
/
4
TG2H-2S ‡ 2 s/s 56 4000 565 513/8x 34
3
/
4
x 78
1
/
4
SOLID HALF DOORS
TG1H-2HS ‡ 2 s/s 31 2000 N/A 29 x 34
3
/
4
x 78
1
/
4
TG2H-4HS ‡ 4 s/s 56 4000 N/A 513/8x 34
3
/
4
x 78
1
/
4
GLASS DOORS
TG1H-1G ‡ 1 gls 31 2000 N/A 29 x 34
7
/
8
x 78
1
/
4
TG2H-2G ‡ 2 gls 56 4000 N/A 513/8x 34
7
/
8
x 78
1
/
4
GLASS HALF DOORS
TG1H-2HG ‡ 2 gls 31 2000 N/A 29 x 34
7
/
8
x 78
1
/
4
TG2H-4HG ‡ 4 gls 56 4000 N/A 513/8x 34
7
/
8
x 78
1
/
4
Pass-thru heateD Cabinets
Model
Swing
Doors
Cu.
Ft. Watts
Crated
Weight
Cabinet Dimensions
L D† H*
SOLID FRONT/SOLID REAR DOORS
TG1HPT-1S-1S ‡ 2 s/s 31 2000 400 29 x 37
1
/
4
x 78
1
/
4
TG2HPT-2S-2S ‡ 4 s/s 56 4000 600 513/8x 37
1
/
4
x 78
1
/
4
GLASS FRONT/SOLID REAR DOORS
TG1HPT-1G-1S ‡ 1 gls - 1 s/s 31 2000 480 29 x 37
1
/
4
x 78
1
/
4
TG2HPT-2G-2S ‡ 2 gls - 2 s/s 56 4000 N/A 513/8x 37
1
/
4
x 78
1
/
4
† Depth does not include 13/8" for door handle on glass door models.
* Height does not include 6" for leg height or 5" for optional castors (castors available on single section
models only).
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: Two section models require hard wiring.
† Depth does not include 13/8" for door handle on glass door models.
* Height does not include 6" for leg height or 5" for optional castors (castors available on single section
models only).
* Height does not include 1" for system mechanical components.
‡ Requires 115/208-240/60 Hz, single phase, 3 pole, 4 wire circuit.
note: Two section models require hard wiring.
NEW
NEW
NEW
NEW
NEW
NEW
NEW
NEW
True Heated Cabinets are
designed to hold warm
baked or cooked food.
Cabinets are not designed
to heat ambient or cold
product.
