Trust Care LGU330 User manual

SERVICE MANUAL
Let’s Get Up bed handle.
From Trustcare.

Exchange of grab handle
Exchange of grab handle adjustment set
Exchange of bed bracket adjustment set
Art. No. LGU330
Art. No. LGU325
Art. No. LGU315
Page 3
Page 4
Page 5
TABLE OF CONTENTS

3. www.trustcare.se
Exchange of grab handle.
Let’s Get Up Spare part. Art. No. LGU330
Let’s Get Up Service Manual. Revision version No: 1 - May 2021
1. Loosen the handle height adjustment screw by using an allen key.
4. Tighten the handle height adjustment screw.3. Insert the new grab handle.
2. Remove the handle by pulling it up.

5. www.trustcare.se
Exchange of grab handle adjustment set.
Let’s Get Up Spare part. Art. No. LGU325
Let’s Get Up Service Manual. Revision version No: 1 - May 2021
1. Loosen the handle height adjustment screw. 2. Remove the screw, the lock plate and the grab handle.
3. Remove the cover, tube slider and the spring. 4. Insert the new tube slider and place the the cover.
5. Insert the new screw and the spring with the lock plate.
Finish by insterting the grab handle .
6. Adjust the grab handle to the desired position and
tighten the handle height adjustment screw.

6. www.trustcare.se
Exchange of bed bracket adjustment set.
Let’s Get Up Spare part. Art. No. LGU315
Let’s Get Up Service Manual. Revision version No: 1 - May 2021
1. Remove the screw and the bracket assembly. 2. Remove the bracket bushing from the bed frame bracket.
3. Attach the new bracket bushing and tighten the screws. 4. Insert the new bracket bushing and tighten the screw.
5. Make sure that the screw is secured. 6. Tighten both screws and make sure that the bed frame
bracket is secured.