Trust MI-7500X User manual

MI-7500X Wireless Laser Mouse
1
UK
Product information
A:Scroll-wheel and third button
Battery-low LED (lit flashing)
B: Right button
C: Left button
D: Browser backward button
E: Browser forward button
F: Connection button
G: Motion sensor
H: Battery compartment
I: Status LED
Lit steady: power
Lit flashing: mouse movement
J: Charging LED:
Lit steady: charging
Lit flashing: fully charged
K: Connection button
L: Power adapter jack
M: USB to PS/2 converter
Installation
1
Insert batteries
Connect power to cradle
Charge batteries
2 PC off
3 A: Connect USB or
B: use USB to PS/2 converter
4 PC on
Windows 98SE follow onscreen instructions to finish!
5 Press connection button; Status LED flashing
6 Press connection button
Mouse is ready to use
Install Trust Easy Configuration Software
7 Place CD in CD-ROM
8 Click “Install software”; Follow on screen instructions to finish
Restart system when prompt!
Reminder
Less performance
• Metal object close to or in between the device.
• Material of the surface which may cause sensor imprecision. Use a mousepad to avoid it.
• Follow step 5 and 6 to change channel in case of disturbace.
• Batteries (almost) empty.
• Another wireless device is close by.
General usage
• Adjust the speed of mouse pointer: (1) Open Windows Help (Start →Help). (2) Search “adjust the speed of mouse
pointer”. (3) Follow instructions.
• Read the manual on CD for the use of the configuration program
• Install Trust Easy Configuration software on CD to configure the 3rd, 4th and 5th button

MI-7500X Wireless Laser Mouse
2
• Do not use old and new batteries at the same time, because the old batteries may deplete the new ones.
• Keep mouse on cradle no longer than 48 hours.
• Do not attempt to recharge alkaline batteries. There is a danger of them exploding.
If you have any problems, go to www.trust.com/14518 (14519, UK model) for FAQ, software and manuals.
Safety
• Do not open or repair this device.
• Keep this device away from liquids, such as water.
• Do not stare into the laser.
• This device meets the essential requirements and other relevant conditions of the applicable European
directives. The Declaration of Conformity (DoC) is available at www.trust.com/14518/ce or
www.trust.com/14519/ce (UK model)
Wireless
• This wireless device works at a frequency of 27MHz. It meets the essential requirements and other relevant
conditions of R&TTE Directive 1999/5/EC and can be used in EU countries plus: EU candidates and
NO/CH/RU/HR/IS/UA. There are no limitations per channel for the above-mentioned countries. Go to
www.trust.com/14518 for an updated list of the countries where the use of this device is permitted.
• There may be restrictions for the use of this device outside of the EU. If this device is used outside of the EU,
check whether this device meets local regulations. Frequency: 27.045MHz, Bandwidth: 10KHz, Power: <
1mW.
• Nowadays, there are an increasing number of wireless products (video, audio, computer, etc.) which work in
the same frequency range as this device. It may, therefore, be possible that the functionality of this product is
limited by or is limiting for other wireless products. This can only be avoided by paying attention to the
distance between products and, where possible, by changing channels.
• Be careful when using wireless devices if you have a pacemaker or are dependent on other life-saving,
sensitive electronic equipment, because this product transmits radio signals.
Warranty & copyright
• This product has a two-year manufacturer's warranty which is effective from the date of purchase. For more
information see www.trust.com/warranty
• Reproduction of this manual or any part of it is prohibited without permission from Trust International B.V.