TurboTronic airchef Pro TT-AFO12W User manual

AIR FRYER OVEN
INSTRUCTION MANUAL
TT-AFO12W
www.zline-world.com
EN

2
Thank you for buying airchef Pro - Digital air fryer oven by
TurboTronic®.
You will now be able to cook a wide assortment of food in a healthier
manner –with little or no oil!
The air fryer uses hot air, in combination with high-speed air circulation,
and a top grill to prepare your dishes quickly and easily. The ingredients
are heated from all sides, at once, and there is no need to add oil in most
cases.
GENERAL DESCRIPTION
A: Control panel B: Door handle C: Glass door D: Power cord
ACCESSORIES IN THE PACKAGE:
Take baking tray tong Oil tray Rotisserie Fork
Mesh basket cage Rack Filter

3
CONTROL PANEL:
A: Menu
E: Time/Temperature
minus
I:ON/OFF
B: Time/Temperature
display
F: Temperature
J: Pause/Start
C: Time/Temperature
plus
G: Light
K: Rotisserie
D: Time
H: Preset
L:LOCK
IMPORTANT
READ THIS USER MANUAL CAREFULLY, BEFORE YOU USE THE APPLIANCE,
AND KEEP IT SAFELY FOR FUTURE REFERENCE.
WARNINGS
- Never immerse the housing, which contains electrical components and the heating
elements, in water nor rinse it under the tap.
- Do not let any water or other liquid enter the appliance –to prevent electric shock.
- Always put the ingredients to be fried in the basket, to prevent it from coming into
contact with the heating elements.
- Do not cover the air inlet and the air exhaust openings while the appliance is operating.
- Do not fill the frying tray with oil as this may cause a fire hazard.
- Never touch the inside of the appliance while it is operating.
- Check whether the voltage indicated on the appliance corresponds to the local mains
voltage in your country before you connect the appliance.
- Do not use the appliance if the plug, the power cord or the appliance itself is damaged.

4
- If the power cord is damaged, you must have it replaced at a service center authorized
by similarly qualified persons in order to avoid a hazard.
- This appliance is not suitable for children or for people who are either physically or
mentally handicapped or who lack experience and knowledge. Should you want anyone
else to use the appliance, that person should be properly guided on its use.
- Keep the appliance and its mains cord out of the reach of children when the appliance is
switched on or is cooling down.
- Keep the mains cord away from hot surfaces.
- Do not plug in the appliance or operate the control panel with wet hands.
- Only connect the appliance to an earthed wall socket. Always make sure that the plug is
inserted into the wall socket properly.
- Never connect this appliance to an external timer switch.
- Do not place the appliance on or near combustible materials such as a tablecloth or
curtains.
- Do not placethe applianceagainst a wall or against other appliances. Leaveat least 10cm
free space at the back and sides and 10cm free space above the appliance. Do not place
anything on top of the appliance.
- Do not use the appliance for any purpose other than described in this manual.
- Do not let the appliance operate unattended.
- During hot air frying, hot steam is released through the air exhaust openings. Keep your
hands and face at a safe distance from the steam and from the air exhaust openings.
Also be careful of hot steam and hot air when you remove the frying tray from the
appliance.
- The surface below the appliance may become hot during use.
- Immediately unplug the appliance if you see dark smoke coming out of the appliance.
Wait for the smoke emission to stop before you remove the frying tray from the
appliance.
CAUTION
- Place the appliance on a horizontal, level and stable surface.
- This appliance is intended for normal household use only. It is not intended for use in
environments such as staff kitchens, offices, farms or other work environments. Nor is it
intended to be used by clients in hotels or other similar environments.
- If the appliance is used improperly or if it is not used according to the instructions in the
user manual, the warranty becomes invalid and seller refuses any liability for any
damage that may be caused.
- Always unplug the appliance after use.
- Let the appliance cool down for approx. 30 minutes before you handle or clean it.
- Remove burnt remnants.

5
Indicates to read and review instructions to understand operation and use of product.
Indicates the presence of a hazard that can cause personal injury, death or substantial
property damage if the warning included with this symbol is ignored.
Take care to avoid contact with hot surface. Always use hand protection to avoid burns.
For indoor and household use only.
UNIT SPECIFICATIONS
BEFORE FIRST USE
1. Remove all packing material.
2. Remove any stickers or labels from the appliance –other than the rating label.
3. Thoroughly clean the frying accessories, with hot water and some liquid washing soap
using a non-abrasive sponge.
Note: Youcan also clean these parts in the dishwasher.
4. Wipe the inside and outside of the appliance with a moist cloth.
PREPARING FOR USE
1. Place the appliance on a stable, horizontal and level surface that is also heat resistant.
2. Place the basket in the frying tray properly.
Do not fill the frying tray with oil or any other liquid.
Do not put anything on top of the appliance. This disrupts the airflow and affects
the air-frying result.
USING THE APPLIANCE
1. Machine using condition:
A. Voltage: 100～240 VAC
B. Frequency：50-60Hz；
C. Room Temp：-20～85°C。
Model No.
Supply Power
Power
Capacity
Display
TT-AFO12W
220-240V, 50/60Hz
1600W -1800W
12L
LED Touch
Screen

6
D. Humidity：30%～95%RH。
2. Control Panel Type
LED display with temperature and timing by 50-200°C & 01-60min, White lighting；
1. Stand Mode
When the machine was plug on, the buzzer will have a remind sound，and background
light on panel will shinning and program itself will auto make self-check first, after 1
second machine is understand mode, and only the is still light on.
2. Menu/Temperature/Timing operation
A. After plug on and was lighted on, press ，program appointed by
180°C & 15min，all icons will be lighted on，customers can use the + & - to
select temperature and timing they want; also can use the different cooking icons
to selection certain program to cook certain food;
B. When you press any icon, it’s lighting will flash and after you press ，
then the machine will work under the selected cooking program。Each cooking
program already have appointed cooking temperature and cooking time
according professional suggestion from our appointed Chef, customer can refer
to following instruction cooking form to better understand。
C. Customer can adjust the cooking temperature and timing to make your
personal favor taste；

7
SUGGESTED COOKING TEMPERATURE & TIMING
Menu table
Icon
Time
(min)
Temperature
（°C）
Function
French Fry
15
200
Ham
12
200
Vegetable
10
160
Drumstick
20
200
Steak
12
180
Chicken with Rotisserie
30
200
Shrimp
8
180
Cake
25
160
Fish
10
180
Pizza
20
200
Chicken
20
200
Pre-heat
3
180
D. The setting temperature is 50-200°C，you can press if you need to adjust
the temperature, after you press after you press , and each press of +/-,
temperature will plug or minus by 50°C; If you keep press “+” under 200°C，
temperature will go back to 50°C，while under 50°C to press“-” temperature will
go to 200°C; during your adjusting, the temperature number will be flashing on the
display, and stop after 3 second, which mean the selected temperature was
confirmed；
E. The setting timing is 01-60min，you can press to adjust the correct timing
if you need，after you press , each press of +/-, it will plug or minus 1min; If
you press “+” under 60mins，timing will go back to 01min， while you press “-

8
“ under 01min, timing will become 60min; during your adjusting, the timing number
will be flashing on the display, and stop after 3 second, which mean the selected
timing was confirmed；
F. Start/Pause/Stop Buttons
According above instructions, after you confirmed certain cooking program and
also selected the certain temperature and timing, press to start， will flash
on，buzzer will have a remind sound to confirm the machine start to work; during
working, you can press again to pause， lighting stop flash and timing
stop down count； During working, if you can press to completely stop if
needed, buzzer will have a remind sound to confirmed the machine was shut down
and stop working, go back to stand mode；
G. Buzzer reminder:
While the machine finished a certain cooking, buzzer will have 10 times alert to
reminder customer cooking was finished, machine will stop heating and running;
Remark: While machine finished a certain cooking and the timing down count go
to 0:00, customer can’t adjust the temperature and timing, need to select next
cooking program first;
H. Motor working time delay
While the machine finished a certain cooking, heating element will stop working
immediately while the motor still need 1 min later to back to standby mode;
I. Working Lighting:
During working, press , the lighting in cooking chamber will be turned on,
press again you will be off;
For safety purpose, during working, if you open the main door, chamber lighting
also will turn on, heating element & motor will turn off in the mean time, and the
control panel also shut down;
J. Synchronous Motor working
During working, press to start synchronous motor inside.
K. Timer function:
Selected a certain cooking program first, and then press , the appointed
timing was 3H, you can adjust the needed timing by “+/-“, each press will plug or
minus 1H, 1-8H as a circle; after you selected certain timer, machine will auto start
after 3 second, and the display will turn out the cooking time you choose.
During timer cooking mode, only button is still active, if you need to cancel
this pre-set timer, you need to press to stop and select next operation;
During timer cooking mode, you can press gnikooc tnaveler eht wonk ot
program’s tem and cooking time.
L. Display instruction
During working, the temperature and timing data will alternate automatically in
each 2 second. Temperature is the selected temp you need, and timing data is by

9
down count way by minutes
M. Lighting instruction
During working, RED color heating light will turn on, which the chamber
temperature reach the appointed temp, heating element will stop heat up and RED
light will turn off;
N. Memory Function
When you open the main door during working, machine will pause; after you close
the door, buzzer will have 1 sound reminder, and machine continue the selected
cooking program with confirmed temperature and timing.
IF face suddenly power off or customer plug off as some reason, machine will
stop working completely; while electrical supply cover back or you plug on again,
buzzer will have 1 sound reminder, and machine continue the selected cooking
program with confirmed temperature and timing.
CLEANING
Clean the appliance after every use.
The frying tray and the inside of the appliance have a non-stick coating. Do not use metal
kitchen utensils or abrasive cleaning materials to clean them, as this may damage the
non-stick coating.
1. Remove the mains plug from the wall socket and let the appliance cool down.
Note: open the door to let the air fryer cool down more quickly.
2. Wipe the outside of the appliance with a moist cloth.
3. Clean the accessories with hot water, some washing liquid soap and a non-abrasive
sponge.
You can use a washing liquid to remove any remaining dirt.
Note: The frying tray is dishwasher-proof.
1. Clean the inside of the appliance with hot water and a non-abrasive sponge.
2. Clean the heating element with a cleaning brush to remove any food residues.
STORAGE
1. Unplug the appliance and let it cool down.
2. Make sure all parts are clean and dry.
TROUBLESHOOTING

10
Problem
Possible cause
Solution
The air fryer oven
does not work
The appliance is not
plugged into the mains.
Put the mains plug in an earthed
wall socket.
Youhave not set the timer.
Turn the timer knob to the required
Preparation time to switch on the
appliance.
The ingredients
fried with the
air fryer oven are
not done.
The amount of the
ingredients in the basket is
too much.
Put smaller batches of ingredients in
the basket. Smaller batches are fried
moreevenly.
The set temperature is too
low.
Turn the temperature control knob to
the required temperature setting
(see section 'Settings').
The preparation time is too
short.
Turn the timer knob to the required
preparation time (see section
'Settings').
The ingredients
are fried unevenly
in
the air fryer oven
Certain types of the
ingredients need to be
shaken halfway through the
preparation time.
Ingredients that lie on top of or
across each other (e.g. fries) need
to be shaken halfway through the
preparation time (see section
'Settings').
Fried snacks arenot
crispy when they
come out of the air
fryer
You used a type of snacks
meant to be prepared in a
traditional deep fryer.
Use oven snacks or lightly brush
some oil onto the snacks for a
crispier result.
Whitesmokecomes
out ofthe appliance
Youare preparing greasy
ingredients.
Pay attention that the temperature
is well-controlled to be under 180°C,
when you fry greasyingredients in
the air fryer.
Problem
Possible cause
Solution

11
The pan still contains
greasy residues from
previous use.
White smoke is caused by grease
heating up in the pan. Make sure
you clean the pan properly after
each use.
Fresh potato fries
arefriedunevenly
in theair fryer.
Youdid not soak the potato
sticks properly before you
fried them.
Soak the potato sticks in a bowl of
water for at least 30 minutes; take
them out and dry them with kitchen
paper.
Youdid not use the right
potato type.
Use fresh potatoes and make sure
they stay firm duringfrying.
Fresh potato fries
arenot crispy
whentheycome
outof theairfryer.
The crispiness of the fries
depends on the amount of oil
and water in the fries.
Make sure you dry the potato sticks
properly before you coatthem withoil.
Cut the potato into thinner sticks for
a crispier result.
Add slightly more oil for a crispier
result.
DISPOSAL OF OLD ELECTRICAL APPLIANCES
The European directive 2002/96/EC on Waste Electrical and Electronic
Equipment (WEEE), requires that old household electrical appliances
must not be disposed of in the normal unsorted municipal waste stream.
Old appliances must be collected separately in order to optimize the
recovery and recycling of the materials they contain, and reduce the
impact on human health and the environment. The crossed out
“wheeled bin” symbol on the product reminds you of your obligation, that when you
dispose of the appliance, it must be separately collected. Consumers should contact their
local authority or retailer for information concerning the correct disposal of their old
appliance.
LIMITED WARRANTY

12
Limited Warranty applies to purchases made from authorized retailers of TurboTronic®.
TurboTronic®Warranty coverage applies to the original owner and to the original product
only and is not transferable.
TurboTronic®warrants that the unit shall be free from defects in material and
workmanship. Limited Warranty apply only when it is used under normal household
conditions and maintained according to the requirements outlined in the Owner’s Guide,
subject to the following
conditions and exclusions:
What is covered by this warranty?
1. The original unit and/or non-wearable parts deemed defective, in TurboTronic®sole
discretion, will be repaired or replaced
2. TurboTronic®reserves the right to replace the unit with one of equal or greater value.
What is not covered by this warranty?
1. Normal wear and tear of wearable parts (such as blending vessels, lids, cups, blades,
blender bases, removable pots, racks, pans, etc.), which require regular maintenance
and/or replacement to ensure the proper functioning of your unit, are not covered by this
warranty.
2. Any unit that has been tampered with or used for commercial purposes.
3. Damage caused by misuse, abuse, negligent handling, failure to perform required
maintenance (e.g., failure to keep the well of the motor base clear of food spills and other
debris), or damage due to mishandling in transit.
4. Consequential and incidental damages.
5. Defects caused by repair persons not authorized by TurboTronic®. These defects
include damages caused in the process of shipping, altering, or repairing the
TurboTronic®product (or any of its parts) when the repair is performed by a repair
person not authorized by TurboTronic®.
6. Products purchased, used, or operated outside Europe.
Illustrations may differ from actual product.
We are constantly striving to improve our products, therefore the specifications contained
herein are subject to change without notice.
TurboTronic®and Z-Line®are registered trademarks of Z-GLOBAL B.V.B.A ®
PRINTED IN PRC