Turn of the century 355-1792 User manual

LIMITED LIFETIME WARRANTY
Model No.: # 355-1792
The limited lifetime warranty covers this ceiling fan, for residential use by the original purchaser, against defects in
material or workmanship as follows:
If your Turn of the Century Ceiling Fan motor fails at any time during the lifetime of the original purchaser due to
defects in material or workmanship, we will provide a replacement part free of charge.
If your Fan motor fails at any time within one year after the original date of sale to the original purchaser due to defects
in material or workmanship, we will provide labor to repair the defect, with the exception of take down/reinstallation,
free of charge. The original purchaser will be responsible for all labor costs after this one year period.
If no replacement parts are provided for any part of your Fan motor that fails at any time during your lifetime due to
defects in material or workmanship, we will refund the original purchase price of your Fan.
If your Fan blades, or any accessory, except glass globes and light bulbs, fails at any time within one year after the
original date of purchase due to a defect in material and workmanship, we will repair or, if we choose, replace the
defective blades, switch, or accessory free of charge, with the exception of take down/reinstallation services.
If the original purchaser ceases to own the Fan, this warranty and any implied warranty, including but not limited to any
implied warranty of merchantability or fitness for a particular purpose, become void. This warranty and any implied
warranty, including but not limited to any implied warranty of merchantability or fitness for a particular purpose, do not
cover glass globes, light bulbs, or finish on any metal portions of the Fan.
This warranty is in lieu of express warranties. The duration of any implied warranty of merchantability or fitness for a
particular purpose, with respect to any Turn of Century Ceiling Fan motor, blades, switch, or accessories, is expressly
limited to the period of the express warranty set forth above for such motor, blades, switch, or accessories.
This warranty excludes defects, malfunctions, or failures of any Turn of Century Fan that are caused by repairs by
persons not authorized by us, use of parts or accessories not authorized by us, mishandling, improper installation,
modifications or damage to the Fan while in your possession, or unreasonable use, including failure to provide
necessary maintenance.
To obtain service, contact Turn of Century Service Department at 1-800-887-6326, 9AM-5PM CST. You will be
responsible for all insurance and freight or other transportation charges to our factory or service center. A copy of
sales receipt is required in order to obtain service. We will return your Fan freight prepaid. Your Fan should be
properly packed to avoid damage in transit, for we will not be responsible for any such damages.
In no event shall Turn of Century Fan be liable for consequential or incidental damages.
Some states do not allow the exclusion or limitation of consequential or incidental damages, in which case the above
limitation or exclusion may not apply.
This warranty gives you specific legal rights and you may also have other rights which vary from state to state.
To obtain Service, please contact or call Turn of the Century Service Department:
1-800-887-6326, 9 a.m.- 5 p.m. central time.
Turn of the Century
TM

Unpack your fan and check the contents. You should have the following items.
1.) Hanger Bracket
2.) Fan Fixture Set
3.) Fan Blade with Blade Holder (X3)
4.) Wall Controller
5.) Assembly Kit
6.) Installation Instruction
Package Contents:
2
1
4
5
6
Installation Instruction
A. 16 in. B. 17-1/2 in. C. 4-1/2 in. D. 7-5/8 in. E. 5-3/4 in.
070327
Turn of the Century
TM
Dimension Reference
3
A B
C
D
E

Hanger Bracket
Canopy
Roller
Fan Blade Housing
Exploded View Detail
070327
Turn of the Century
TM

Safety Instructions
READ ALL SAFETY INFORMATION AND INSTALLATION INSTRUCTIONS BEFORE YOU BEGIN
INSTALLING THE FAN. SAVE INSTRUCTIONS.
All set screws of the fan must be checked and retightened where necessary before installation.
To reduce the risk of personal injury, do not bend the blade brackets when installing the brackets,
balancing the blades or cleaning fan. Do not insert foreign objects in between rotating fan blades.
Before changing the fan direction, turn off the fan and wait for the fan blades to stop completely.
If a stationary appliance is not provided with a supply cord and a plug, or with other means for
disconnection from the mains supply having a contact separation of at least 3 mm in all poles, that
means for disconnection must be incorporated in the fixed wiring in accordance with the wiring rules.
NOTE: The safeguards provided by these safety instructions and by the separate installation
instructions are not meant to cover all possible conditions and situations that may occur. It must be
understood that common sense, caution and care are factors which can not be built into this product.
These factors must be supplied by the person(s) installing, caring for and operating the fan.
TOAVOID RISK OF ELECTRIC SHOCK, BE SURE TO SHUT OFF POWER AT THE MAIN
FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS
FIXTURE. TURNING OFF THE ELECTRICAL POWER BY USING THE LIGHT SWITCH
IS NOT SUFFICIENT TO PREVENT ELECTRICAL SHOCK.
TO REDUCE THE RISK OF INJURY, INSTALL THE FAN SO THAT THE BLADES ARE
AT LEAST 10 FEET (3 METERS) ABOVE THE FLOOR AND AT LEAST 18 INCHES
(0.5 METERS) FROM THE TIP OF THE BLADES TO THE WALL.
TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK, OR PERSONAL INJURY, MOUNT
TO OUTLET BOX MARKED "ACCEPTABLE FOR FAN SUPPORT" AND USE MOUNTING
SCREWS PROVIDED WITH THE OUTLET BOX.
THE INSTALLATION HAS TO BE IN ACCORDANCE WITH THE NATIONAL ELECTRICAL
CODE, ANSI/NFPA 70-1999 AND LOCAL CODES. IF YOU ARE UNFAMILAR WITH THE
METHODS OF INSTALLING ELECTRICAL WIRING, SEEK THE SERVICES OF A
QUALIFIED LICENSED ELECTRICIAN.
WARNING
070327
Turn of the Century
TM

PAGE: 1 / 4
Installation Steps :
INSTALLATION INSTRUCTIONS
IMPORTANT:
BEFORE YOU BEGIN INSTALLING THE FAN, CAREFULLY READ ALL INFORMATION ON THE SEPARATE
SHEET "SAFETY INSTRUCTIONS" AS WELLAS THE FOLLOWING "INSTALLATION INSTRUCTIONS". IF IN
DOUBT, CONSULTA QUALIFIED ELECTRICIAN.
THIS FAN MUST BE INSTALLED WITH A WALL CONTROL/SWITCH.
SAVE ALL INSTRUCTIONS.
NOTE: The fan weight is 13.6 lb (6.1 kg). Be sure the outlet box you are using is securely attached to the building
structure and can support the full weight of the fan. Failure to do so can result in serious injury.
Fig.1
Turn OFF the electric power at the
main fuse or circuit breaker box.
070327
Turn of the Century
TM
Fig.3
Secure blade holders to the housing with housing screws.
Unscrew the set screws and remove
the wall controller cover from wall
controller base.
Blade
Housing Screw
Tighten the hanger bracket to the outlet box with two mounting screws.(Make sure
the outlet box is securely installed so that it will be able to support at least the
fan weight.) Attach the safety cable hook to the ceiling with the dry wall screw and
washer, and make sure the safety cable hook is covered by the fan canopy.
WARNING: MOUNT ONLY TO AN OUTLET BOX MARKED "ACCEPTABLE
FOR FAN SUPPORT"!
Fig.2
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Junction Box Washer
Safety Cable Hook
Dry Wall Screw
Ceiling
Hanger Bracket
Ceiling Joist
Wood Member
(2" x 4" Approx.)
Fig.4
Locate the roller of the fan
fixture to the hook of the
hanger bracket in position.
Then hang the safety cable
into the safety cable hook.
Hanger Bracket
Hook
Set Screw
Wall Controller
Cover
Wall Controller
Base
Roller
Fan Fixture
Safety Cable Hook
Safety
Cable
Fig.5

PAGE: 2 / 4
Make wires connections in ceiling outlet box: (See Fig.7)
Measure the length of wire that you need.
1). The motor white wire to the white wire from the ceiling outlet box with a wire nut.
2). The motor black wire to the black wire from the ceiling outlet box with a wire nut.
3). The motor ground wire to the ground wire from the ceiling outlet box with a wire nut.
*** After making the wire connections, the wires should be spread apart with the grounded conductor and the
equipment-grounding conductor on one side of the outlet box and the ungrounded conductor on the other
side of the outlet box.
*** After the splices have been made, they should be turned upward and pushed carefully up into the outlet box.
Make wires connections in wall outlet box: (See Fig.8)
1). The white (neutral) wire from main power to the white (neutral) wire from the ceiling outlet box with a wire nut.
2). The black (hot) wire from main power to the black wire from the wall controller (with "to main power" sticker)
with wire nut.
3). The black (hot) wire from ceiling outlet box to the black wire from the wall controller
(with "to to ceiling outlet box" sticker) with wire nut.
070327
Turn of the Century
TM
Motor White Wire
Motor Black Wire
Hanger Bracket
Outlex Box
Ground Wire
Roller
Canopy
Fig.7
Fig.6
Motor Ground Wire
Wall Controller
To Main Power
Fan
See Fig.7
See Fig.8
Fig.8
Wall Controller Base
White Wire
Black Wire
Black Wire
(with "to main power" sticker)
(from ceiling
outlet box)
(from ceiling outlet box)
(from main power)
(from main power)
(with "to ceiling outlet box"
sticker)
Black Wire
Black Wire
White Wire

PAGE: 3 / 4
Set Screw
Set Screw
Canopy
Wall Controller Base
Drywall Screw
Knob
Arrow Controller Cover
Downrod
Wall Controller
Downrod Stand
Cover
070327
Turn of the Century
TM
Fig.9
Fig.11
Fig.10
Fig.12
Turn ON the electric power at the main
fuse or circuit breaker box.
After the wall controller splices have been made, they should
be pushed carefully into the wall controller base.
Secure the wall controller base to the wall by using two drywall
screws.
Attach the knob to the wall controller base first, and then the
controller cover. Turn the arrow of the knob at "0" position
marked on the Controller cover.
Attach the canopy against the ceiling.
Aligning holes, secure the canopy by using
a set screw. Then attach the downrod stand
cover to the housing, secure it with another
set screw.
Use wall controller to control the fan speed.
Switch knob to 0 to turn off the fan.
Switch knob to 1 to turn the fan in high speed.
Switch knob to 2 to turn the fan in high-medium speed.
Switch knob to 3 to turn the fan in medium speed.
Switch knob to 4 to turn the fan in medium-low speed.
Switch knob to 5 to turn the fan in low speed.

Trouble Shooting Guide
If you have difficulty operating your new ceiling fan, it may be the result of incorrect assembly, installation
or wiring. In some cases, these installation errors may be mistaken for defects. If you experience any faults,
please check this Trouble Shooting Guide. If a problem cannot be remedied or you are experiencing difficulty
in installation, please call our Customer Service Department.
TROUBLE
1. If fan does not start:
2. If fan sounds noisy:
3. If fan wobbles:
1. Check main and branch circuit fuses or circuit breakers.
2. Check line wire connections to fan and switch wire connections in switch
housing.
CAUTION: Make sure main power is turned off.
3. Make sure that the wall controler is turned "ON".
1. Make sure all screws in motor housing are snug. (not over tightened)
2. Make sure the screws which attach the fan blade holder to the motor are tight.
3. Make sure wire nut connectors in switch housing are not rattling against each
other or against the interior wall of the switch housing.
CAUTION: Make sure main power is turned off before entering switch housing.
4. Some fan motors are sensitive to signals from Solid State variable speed
controls. DO NOT USE a Solid State variable speed control.
5. Allow "break-in" period of 24 hours. Most noises associated with a new fan will
disappear after this period.
All blades are weighed and grouped by weight. Natural woods vary in density
which could cause the fan to wobble even though all blades are weight-matched.
The following procedures should eliminate most of the wobble. Check for wobble
after each step.
1. Check that all blades are screwed firmly into blade holders.
2. Check that all blade holders are tightened securely to motor.
3. Make sure that canopy and mounting bracket are tightened securely to ceiling
junction box and junction box is mounted firmly to ceiling joist.
4. Most fan wobble problems are caused when blade levels are unequal. Check
this level by selecting a point on the ceiling above the tip of one of the blades.
Keeping measure within 1/8 in. rotate the fan until the next blade is positioned
for measurement. repeat for each blade. If all blade levels are not equal, you
can adjust blade levels by the following procedure. To adjust a blade tip down,
insert a washer (not supplied) between the blade and blade holder at the screw
closest to the motor. To adjust a blade tip up, insert washer (not supplied)
between the blade and blade holder at the two screws farthest from the motor.
5. If blade wobble is still noticeable, interchanging two adjacent (side by side)
blades can redistribute the weight and possibly result in smoother operation.
SUGGESTED REMEDY
PAGE: 4 / 4 070327
Turn of the Century
TM