TYAN FT65T-B8030 Quick start guide

1
http://www.tyan.com
FT65T-B8030
Tower Server Engineer’s Manual

2
http://www.tyan.com
PREFACE
Copyright
This publication, including all photographs, illustrations, and software, is
protected under international copyright laws, with all rights reserved.
Neither this manual, nor any material contained herein, may be reproduced
without written consent of manufacturer.
Copyright 2021 MITAC COMPUTING TECHNOLOGY CORPORATION. All
rights reserved. TYAN®is a registered trademark of MITAC COMPUTING
TECHNOLOGY CORPORATION.
Version 1.0
Disclaimer
Information contained in this document is furnished by MITAC COMPUTING
TECHNOLOGY CORPORATION and has been reviewed for accuracy and
reliability prior to printing. MITAC assumes no liability whatsoever, and
disclaims any express or implied warranty, relating to sale and/or use of TYAN®
products including liability or warranties relating to fitness for a particular
purpose or merchantability. MITAC retains the right to make changes to
produce descriptions and/or specifications at any time, without notice. In no
event will MITAC be held liable for any direct or indirect, incidental or
consequential damage, loss of use, loss of data or other malady resulting from
errors or inaccuracies of information contained in this document.
Trademark Recognition
All registered and unregistered trademarks and company names contained in
this manual are property of their respective owners including, but not limited to
the following.
TYAN®is a trademark of MITAC COMPUTING TECHNOLOGY
CORPORATION.
Intel®is a trademark of Intel®Corporation.
AMI®, AMIBIOS® and combinations thereof are trademarks of AMI
Technologies.
Microsoft®, Windows®are trademarks of Microsoft Corporation.
IBM®, PC®, AT®and PS/2®are trademarks of IBM Corporation.
Winbond®is a trademark of Winbond Electronics Corporation.

3
http://www.tyan.com
●FCC Declaration
Notice for the USA
Compliance Information Statement (Supplier's Declaration of Conformity, SDoC)
FCC Part 15: This device complies with part 15 of the FCC Rules.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following conditions:
‧This device may not cause harmful interference.
‧This device must accept any interference received, including interference that may
cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Notice for Canada
This Class B digital apparatus complies with Canadian ICES-003. Cet appareil
numérique de la Classe B est conforme àla norme NMB-003 du Canada.

4
http://www.tyan.com
●Notice for Europe (CE Mark)
This product is in conformity with the Council Directive 2014/30/EU and 2014/35/EU.
CAUTION
Lithium battery included with this board. Do not puncture, mutilate, or dispose of
battery in fire. There will be danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type recommended by manufacturer.
Dispose of used battery according to manufacturer instructions and in accordance
with your local regulations.
●VCCI-B
この装置は、クラスＢ機器です。この装置は、住宅環境で使用することを目的
としていますが、この装置がラジオやテレビジョン受信機に近接して使用される
と、受信障害を引き起こすことがあります。
取扱説明書に従って正しい取り扱いをして下さい。 VCCI-B
●Safety: IEC/EN 62368-1
This equipment is compliant with CB/LVD of Safety: IEC/EN 62368-1:2014.

5
http://www.tyan.com
About this Manual
This manual is intended for trained service technician/personnel with hardware
knowledge of computers. Components inside the compartments should be serviced
only by a trained service technician/personnel. This manual is aimed to provide you
with instructions on installing your TYAN FT65T-B8030.
How this guide is organized
This guide contains the following parts:
Chapter 1: Overview
This chapter provides an introduction to the TYAN FT65T-B8030 barebones and
standard parts list, describes the external components, gives an overview of the
product from different angles.
Chapter 2: Setting Up
This chapter covers procedures on installing the processors, memory modules, hard
drivers and other optional parts.
Chapter 3: Replacing the Pre-installed Components
This chapter covers the removal and replacement procedures for pre-installed
components.
Appendix:
This chapter provides the cable connection table, the FRU parts list for reference of
system setup, and technical support in case a problem arises with your system.

6
http://www.tyan.com
Safety and Compliance Information
Before installing and using TYAN FT65T-B8030, take note of the following
precautions:
·Read all instructions carefully.
·Do not place the unit on an unstable surface, cart, or stand.
·Do not block the slots and opening on the unit, which are provided for
ventilation.
·Only use the power source indicated on the marking label. If you are not
sure, contact the power company.
·The unit uses a three-wire ground cable, which is equipped with a third pin to
ground the unit and prevent electric shock. Do not defeat the purpose of this
pin. If your outlet does not support this kind of plug, contact your electrician
to replace your obsolete outlet.
·Do not place anything on the power cord. Place the power cord where it will
not be in the way of foot traffic.
·Follow all warnings and cautions in this manual and on the unit case.
·Do not push objects in the ventilation slots as they may touch high voltage
components and result in shock and damage to the components.
·When replacing parts, ensure that you use parts specified by the
manufacturer.
·When service or repairs have been done, perform routine safety checks to
verify that the system is operating correctly.
·Avoid using the system near water, in direct sunlight, or near a heating
device.
·Cover the unit when not in use.

7
http://www.tyan.com
Safety Information
Retain and follow all product safety and operating instructions provided
with your equipment. In the event of a conflict between the instructions in
this guide and the instructions in equipment documentation, follow the
guidelines in the equipment documentation.
Observe all warnings on the product and in the operating instructions. To
reduce the risk of bodily injury, electric shock, fire and damage to the
equipment, observe all precautions included in this guide.
You must become familiar with the safety information in this guide before
you install, operate, or service TYAN products.
Symbols on Equipment
Caution. This symbol indicates a potential hazard.
The potential for injury exists if cautions are not
observed. Consult equipment documentation for
specific details.
Caution. Slide-mounted equipment is not to be
used as a shelf or a work space.
Warning. This symbol indicates the presence of
hazardous energy circuits or electric shock
hazards. Refer all servicing to qualified personnel.
Warning. This symbol indicates the presence of a
hot surface or hot component. If this surface is
contacted, the potential for injury exists.
To reduce risk of injury from a hot component,
allow the surface to cool before touching.
CAUTION: Risk of Explosion if Battery is replaced
by an Incorrect Type. Dispose of Used Batteries
According to the Instructions.
ATTENTION: Risque d’explosion si la batterie est
remplacée par un type incorrect. Mettre au rebus
les batteries usagées selon les instructions.
Multiple power connections. Prior to servicing,
disconnect all power cords.
Raccordements de puissance multiples. Avant
l’entretien, vous devez débranchez tous les
cordons d’alimentation.

8
http://www.tyan.com
General Precautions
·Follow all caution and warning instructions marked on the equipment and
explained in the accompanying equipment documentation.

Machine Room Environment
·Make sure that the area in which you install the system is properly
ventilated and climate-controlled.
·Ensure that the voltage and frequency of your power source match the
voltage and frequency inscribed on the electrical rating label of the
equipment.
·Do not install the system in or near a plenum, air duct, radiator, or heat
register.
·Never use the product in a wet location.
Equipment Chassis
·Do not block or cover the openings to the system.
·Never push objects of any kind through openings in the equipment.
Dangerous voltages might be present.
·Conductive foreign objects can produce a short circuit and cause fire,
electric shock, or damage to your equipment.
·Lift equipment using both hands and with your knees bent.
Equipment Racks
To avoid injury or damage to the equipment:
·Observe local occupational health and safety requirements and guidelines
for manual materials handling.
·Do not attempt to move a rack by yourself; a minimum of two people are
needed to move a rack.
·Do not attempt to move a fully loaded rack. Remove equipment from the
rack before moving it.
·Do not attempt to move a rack on an incline that is greater than 10 degrees
from the horizontal.

9
http://www.tyan.com
·Make sure the rack is properly secured to the floor or ceiling.
·Make sure the stabilizing feet are attached to the rack if it is a single-rack
installation.
·Make sure racks are coupled together if it is a multiple-rack installation.
·Make sure the rack is level and stable before installing an appliance in the
rack.
·Make sure the leveling jacks are extended to the floor.
·Make sure the full weight of the rack rests on the leveling jacks.
·Always load the rack from the bottom up. Load the heaviest component in
the rack first.
·Make sure the rack is level and stable before pulling a component out of the
rack.
·Make sure only one component is extended at a time. A rack might become
unstable if more than one component is extended.
To avoid damage to the equipment:
·The rack width and depth must allow for proper serviceability and cable
management.
·Ensure that there is adequate airflow in the rack. Improper installation or
restricted airflow can damage the equipment.
·The rack cannot have solid or restricted airflow doors. You must use a
mesh door on the front and back of the rack or remove the doors to ensure
adequate air flow to the system.
·If you install the Model in a rack, do not place equipment on top of the unit.
It will cause restricted airflow and might cause damage to the equipment.
·Make sure the product is properly matted with the rails. Products that are
improperly matted with the rails might be unstable.
·Verify that the AC power supply branch circuit that provides power to the
rack is not overloaded. This will reduce the risk of personal injury, fire, or
damage to the equipment. The total rack load should not exceed 80 percent
of the branch circuit rating. Consult the electrical authority having jurisdiction
over your facility wiring and installation requirements.

10
http://www.tyan.com
Equipment Power Cords
·Use only the power cords and power supply units provided with your
system. The system might have one or more power cords.
·Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
·In all European electrical environments, you must ground the Green/Yellow
tab on the power cord. If you do not ground the Green/Yellow tab, it can
cause an electrical shock due to high leakage currents.
·Do not place objects on AC power cords or cables. Arrange them so that no
one might accidentally step on or trip over them.
·Do not pull on a cord or cable. When unplugging from the electrical outlet,
grasp the cord by the plug.
·To reduce the risk of electrical shock, disconnect all power cords before
servicing the appliance.
Equipment Batteries
·The system battery contains lithium manganese dioxide. If the battery pack
is not handled properly, there is risk of fire and burns.
·Do not disassemble, crush, puncture, short external contacts, or dispose of
the battery in fire or water.
·Do not expose the battery to temperatures higher than 60°C (140°F).
·The system battery is not replaceable. If the battery is replaced by an
incorrect type, there is danger of explosion. Replace the battery only with a
spare designated for your product.
·Do not attempt to recharge the battery.
·Dispose of used batteries according to the instructions of the manufacturer.
Do not dispose of batteries with the general household waste. To forward
them to recycling or proper disposal, use the public collection system or return
them to TYAN, your authorized TYAN partner, or their agents.
Equipment Modifications
·Do not make mechanical modifications to the system. TYAN is not
responsible for the regulatory compliance of TYAN equipment that has been
modified.

11
http://www.tyan.com
Equipment Repairs and Servicing
·The installation of internal options and routine maintenance and service of
this product should be performed by individuals who are knowledgeable about
the procedures, precautions, and hazards associated with equipment
containing hazardous energy levels.
·Retain all screws or other fasteners when removing access cover(s). Upon
completion of accessing inside the product, refasten access cover with original
screws or fasteners.
·Do not exceed the level of repair specified in the procedures in the product
documentation. Improper repairs can create a safety hazard.
·Allow the product to cool before removing covers and touching internal
components.
·Remove all watches, rings, or loose jewelry when working before removing
covers and touching internal components.
·Do not use conductive tools that could bridge live parts.
·Use gloves when you remove or replace system components; they can
become hot to the touch.
·If the product sustains damage requiring service, disconnect the product
from the AC electrical outlet and refer servicing to an authorized service
provider. Examples of damage requiring service include:
–The power cord, extension cord, or plug has been damaged.
–Liquid has been spilled on the product or an object has fallen into the
product.
–The product has been exposed to rain or water.
–The product has been dropped or damaged.
–The product does not operate normally when you follow the operating
instructions.
·Retain all screws or other fasteners when removing access cover(s). Upon
completion of accessing inside the product, refasten access cover with original
screws or fasteners.

http://www.tyan.com
12
Table of Contents
Chapter 1: Overview ........................................................................14
1.1 About the TYAN FT65T-B8030 .............................................. 14
1.2 Product Models....................................................................... 15
1.3 Features.................................................................................. 16
1.4 Standard Parts List................................................................. 22
1.4.1 Box Contents................................................................... 22
1.5 About the Product................................................................... 23
1.5.1 System Front View .......................................................... 23
1.5.2 System Rear View........................................................... 26
1.5.3 System Top View............................................................. 31
1.5.4 Chassis Dimensions........................................................ 34
1.5.5 Board Image.................................................................... 35
1.5.6 Block Diagram ................................................................. 36
Chapter 2: Setting Up ......................................................................37
2.0.1 Before you Begin............................................................. 37
2.0.2 Work Area........................................................................ 37
2.0.3 Tools................................................................................ 37
2.0.4 Precautions...................................................................... 38
2.1Installing Motherboard Components ...................................... 39
2.1.1 Removing the Chassis Cover.......................................... 39
2.1.2Installing the CPU and Heatsink...................................... 42
2.1.3 Installing the Expansion Cards........................................ 46
2.1.4 Installing the Memory ...................................................... 49
2.1.5Installing Hard Drives ...................................................... 52
2.2 Rack Mounting........................................................................ 56
2.2.1 Installing the FT65T-B8030 chassis in a Rack................ 56
2.2.2 Rack Mounting the Server............................................... 60
2.2.3 Removing the Server from Rack ..................................... 61
Chapter 3: Replacing Pre-Installed Components.........................63
3.0.1 Introduction...................................................................... 63
3.0.2 Disassembly Flowchart.................................................... 63
3.1 Removing the Cover............................................................... 64
3.2 Replacing Motherboard Components..................................... 64
3.2.1 Replacing the Riser Card .................................................... 64
3.2.2 PCI-E Riser Cards Specification ......................................... 66
3.3 Replacing the System Fan ..................................................... 67
3.4 Replacing the HDD Backplane Board .................................... 70
3.4.1 HDD BP Board Features................................................. 72
3.4.2 Connector Pin Definitions................................................ 73

http://www.tyan.com
13
3.5 Replacing the Front Panel Board ........................................... 78
3.5.1 Front Panel Board Features............................................ 79
3.5.2 Pin Definition ................................................................... 80
3.6 Replacing the Power Supply .................................................. 81
3.7 Removing the Motherboard.................................................... 86
Appendix I: How to recover UEFI BIOS .........................................88
Appendix II: Cable Connection Tables ..........................................90
Appendix III: Fan and Temp Sensors.............................................93
Appendix IV: FRU Parts Table........................................................97
Appendix VI: Technical Support.....................................................99

http://www.tyan.com
14
Chapter 1: Overview
1.1 About the TYAN FT65T-B8030
Congratulations on your purchase of the TYAN®FT65T-B8030, a highly optimized
Tower Server barebone system. The FT65T-B8030 is designed to support single
AMD®EPYC™ 7002/7003 Series Processors and up to 2TB RDIMM/LRDIMM 3200
DDR4 memory, providing a rich feature set and incredible performance. Leveraging
advanced technology from AMD®, the FT65T-B8030 Tower Server system is
capable of offering scalable 32 and 64-bit computing, high bandwidth memory
design, and lightning-fast PCI-E bus implementation. The FT65T-B8030 not only
empowers your company in nowadays IT demand but also offers a smooth path for
future application usage.
TYAN®also offers the FT65T-B8030 in a version that can support up to eight
3.5”/2.5”hot-swap SSD/HDD and two 2.5” hot-swap NVMe SSD/HDDs. The
FT65T-B8030 uses TYAN’s latest chassis featuring a robust structure and a solid
mechanical enclosure. All of this provides FT65T-B8030 the power and flexibility to
meet the needs of nowadays server application.

http://www.tyan.com
15
1.2 Product Models
The system board within the Tyan Barebone is defined by the following models:
B8030F65TV8E2H-2T-N: AMD-based platform
B8030F65TV8E2H-N: AMD-based platform 
B8030F65TV8E2H-G: AMD-based platform 


SKU Differences
Model Name
FT65T-B8030
SKU Name
B8030F65TV8E2H-2T-N
B8030F65TV8E2H-N
B8030F65TV8E2H-G
Rear FANs
Yes
Yes
No
LAN Ports
5
3
3
NOTE: Rear FANs is only for Tesla Passive GPU cards

http://www.tyan.com
16
1.3 Features
B8030F65TV8E2H-G Specifications
System
Form Factor
Tower Server
Chassis Model
FT65T
Dimension (D x W x H)
25.59" x 17.245" x 6.93" (650 x 438 x 176mm)
Motherboard Name
S8030GM2NE
Front Panel
Buttons
(1) ID / (1) PWR w/ LED / (1) RST
LEDs
(1) HDD / (1) ID / (1) System Event /
(2) LAN activity
I/O Ports
(2) USB 3.0 ports
External Drive Bay
Q'ty / Type
(2) 2.5" Hot-Swap NVMe HDD/SSDs /
(8) 2.5”/3.5" Hot-Swap HDD/SSDs
HDD Backplane Support
SAS 12Gb/s /SATA 6Gb/s /NVMe
Supported HDD Interface
(2) SATA 6Gb/s / NVMe / (8) SATA 6Gb/s / SAS
12Gb/s
System Cooling
Configuration
FAN
(3) easy-swap 12038 fans
Power Supply
Type
ATX 12V
Input Range
AC 100~240V/15~12A
Frequency
50-60 Hz
Output Watts
2000W @ AC Input 200-240Vac
1500W @ AC input 115-200Vac
1200W @ AC input 100-115Vac
Efficiency
80 plus Platinum
Processor
Q'ty / Socket Type
(1) AMD Socket SP3
Supported CPU Series
(1) AMD EPYC™ 7002/7003 Series Processor
Configurable Thermal
Design Power (cTDP)
Wattage
Max up to 240W
Memory
Supported DIMM Qty
(8) DIMM slots
DIMM Type / Speed
DDR4 RDIMM/LRDIMM 3200
Capacity
Up to 2TB
Memory channel
8 Channels per CPU
Memory voltage
1.2V
Expansion Slots
PCIe
(5) PCIe Gen.4 x16 slots
Pre-installed TYAN Riser
Card (PCIe Gen.4)
(1) M7129F83A-L16 riser card for
(1) PCIe Gen.4 x16 slot with PCIe Gen.4 x8 lane
LAN
Q'ty / Port
(2) GbE ports + (1) GbE dedicated for IPMI
Controller
Intel i210
PHY
Realtek RTL8211E
Storage SATA
Connector
(2) SFF-8643 for (8) front SATA drives
Controller
Direct from AMD EPYC CPU
Speed
6Gb/s
RAID
N/A
Storage NVMe
Connector (M.2)
(2) 22110/2280 (by PCIe Gen.4 interface)

http://www.tyan.com
17
Connector (U.2)
(1) SFF-8654 for (2) NVMe ports
Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200
Chipset
Aspeed AST2500
I/O Ports
USB
(2) USB3.0 ports (@ rear)
COM
(1) DB-9 COM port
VGA
(1) D-Sub 15-pin port
RJ-45
(2) GbE ports + (1) dedicated GbE for IPMI
TPM (Optional)
TPM Support
Please refer to our TPM supported list.
System Monitoring
Chipset
Aspeed AST2500
Temperature
Monitors temperature for CPU & memory &
system environment
Voltage
Monitors voltage for CPU, memory, chipset &
power supply
LED
Over temperature warning indicator / Fan & PSU
fail LED indicator
Others
Watchdog timer support
Server
Management
Onboard Chipset
Onboard Aspeed AST2500
AST2500 iKVM Feature
24-bit high quality video compression / Supports
storage over IP and remote platform-flash / USB
2.0 virtual hub
AST2500 IPMI Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / 10/100/1000 Mb/s MAC
interface
BIOS
Brand / ROM size
AMI / 32MB
Feature
Hardware Monitor / FAN speed control automatic
/ Boot from USB device/PXE via LAN/Storage /
Console Redirection / SMBIOS 3.0/PnP/Wake on
LAN / ACPI sleeping states S0, S5
Operating System
OS supported list
Please refer to our AVL support lists.
Regulation
FCC (SDoC)
Class B
CE (DoC)
Class B
RCM
Class B
VCCI
Class B
Operating
Environment
Operating Temp.
10°C ~ 35°C (50°F~ 95°F)
Non-operating Temp.
- 40°C ~ 70°C (-40°F ~ 158°F)
In/Non-operating Humidity
90
90%, non-condensing at 35°C
RoHS
RoHS 6/6 Compliant
Yes
Package Contains
Barebone
(1) FT65T-B8030 Barebone
Manual
(1) Quick Installation Guide

http://www.tyan.com
18
B8030F65TV8E2H-N Specifications
System
Form Factor
Tower Server
Chassis Model
FT65T
Dimension (D x W x H)
25.59" x 17.245" x 6.93" (650 x 438 x 176mm)
Motherboard Name
S8030GM2NE
Front Panel
Buttons
(1) ID / (1) PWR w/ LED / (1) RST
LEDs
(1) HDD / (1) ID / (1) System Event /
(2) LAN activity
I/O Ports
(2) USB 3.0 ports
External Drive
Bay
Q'ty / Type
(2) 2.5" Hot-Swap NVMe HDD/SSDs /
(8) 2.5”/3.5" Hot-Swap HDD/SSDs
HDD Backplane Support
SAS 12Gb/s /SATA 6Gb/s /NVMe
Supported HDD Interface
(2) SATA 6Gb/s / NVMe /
(8) SATA 6Gb/s / SAS 12Gb/s
System Cooling
Configuration
FAN
(2) 8038 hot-swap FAN module at rear /
(3) easy-swap 12038 fans
Power Supply
Type
ATX 12V
Input Range
AC 100~240V/15~12A
Frequency
50-60 Hz
Output Watts
2000W @ AC Input 200-240Vac
1500W @ AC input 115-200Vac
1200W @ AC input 100-115Vac
Efficiency
80 plus Platinum
Processor
Q'ty / Socket Type
(1) AMD Socket SP3
Supported CPU Series
(1) AMD EPYC™ 7002/7003 Series Processor
Configurable Thermal Design
Power (cTDP) Wattage
Max up to 240W
Memory
Supported DIMM Qty
(8) DIMM slots
DIMM Type / Speed
DDR4 RDIMM/LRDIMM 3200
Capacity
Up to 2TB
Memory channel
8 Channels per CPU
Memory voltage
1.2V
Expansion Slots
PCIe
(5) PCIe Gen.4 x16 slots
Pre-installed TYAN Riser
Card (PCIe Gen.4)
(1) M7129F83A-L16 riser card for
(1) PCIe Gen.4 x16 slot with PCIe Gen.4 x8 lane
LAN
Q'ty / Port
(2) GbE ports + (1) GbE dedicated for IPMI
Controller
Intel i210
PHY
Realtek RTL8211E
Storage SATA
Connector
(2) SFF-8643 for (8) front SATA drives
Controller
Direct from AMD EPYC CPU
Speed
6Gb/s
RAID
N/A
Storage NVMe
Connector (M.2)
(2) 22110/2280 (by PCIe Gen.4 interface)
Connector (U.2)
(1) SFF-8654 for (2) NVMe ports
Graphic
Connector type
D-Sub 15-pin
Resolution
Up to 1920x1200

http://www.tyan.com
19
Chipset
Aspeed AST2500
I/O Ports
USB
(2) USB3.0 ports (@ rear)
COM
(1) DB-9 COM port
VGA
(1) D-Sub 15-pin port
RJ-45
(2) GbE ports + (1) dedicated GbE for IPMI
TPM (Optional)
TPM Support
Please refer to our TPM supported list.
System
Monitoring
Chipset
Aspeed AST2500
Temperature
Monitors temperature for CPU & memory &
system environment
Voltage
Monitors voltage for CPU, memory, chipset &
power supply
LED
Over temperature warning indicator / Fan & PSU
fail LED indicator
Others
Watchdog timer support
Server
Management
Onboard Chipset
Onboard Aspeed AST2500
AST2500 iKVM Feature
24-bit high quality video compression / Supports
storage over IP and remote platform-flash / USB
2.0 virtual hub
AST2500 IPMI Feature
IPMI 2.0 compliant baseboard management
controller (BMC) / 10/100/1000 Mb/s MAC
interface
BIOS
Brand / ROM size
AMI / 32MB
Feature
Hardware Monitor / FAN speed control automatic
/ Boot from USB device/PXE via LAN/Storage /
Console Redirection / SMBIOS 3.0/PnP/Wake on
LAN / ACPI sleeping states S0, S5
Operating
System
OS supported list
Please refer to our AVL support lists.
Regulation
FCC (SDoC)
Class B
CE (DoC)
Class B
RCM
Class B
VCCI
Class B
Operating
Environment
Operating Temp.
10°C ~ 35°C (50°F~ 95°F)
Non-operating Temp.
- 40°C ~ 70°C (-40°F ~ 158°F)
In/Non-operating Humidity 90
90%, non-condensing at 35°C
RoHS
RoHS 6/6 Compliant
Yes
Package
Contains
Barebone
(1) FT65T-B8030 Barebone
Manual
(1) Quick Installation Guide

http://www.tyan.com
20
B8030F65TV8E2H-2T-N Specifications
System
Form Factor
Tower Server
Chassis Model
FT65T
Dimension (D x W x H)
25.59" x 17.245" x 6.93" (650 x 438 x 176mm)
Motherboard Name
S8030GM4NE-2T
Front Panel
Buttons
(1) ID / (1) PWR w/ LED / (1) RST
LEDs
(1) HDD / (1) ID / (1) System Event /
(3) LAN activity
I/O Ports
(2) USB 3.0 ports
External Drive
Bay
Q'ty / Type
(2) 2.5" Hot-Swap NVMe HDD/SSDs /
(8) 2.5”/3.5" Hot-Swap HDD/SSDs
HDD Backplane Support
SAS 12Gb/s /SATA 6Gb/s /NVMe
Supported HDD Interface
(2) SATA 6Gb/s / NVMe /
(8) SATA 6Gb/s / SAS 12Gb/s
System Cooling
Configuration
FAN
(2) 8038 hot-swap FAN module at rear /
(3) easy-swap 12038 fans
Power Supply
Type
ATX 12V
Input Range
AC 100~240V/15~12A
Frequency
50-60 Hz
Output Watts
2000W @ AC Input 200-240Vac
1500W @ AC input 115-200Vac
1200W @ AC input 100-115Vac
Efficiency
80 plus Platinum
Processor
Q'ty / Socket Type
(1) AMD Socket SP3
Supported CPU Series
(1) AMD EPYC™ 7002/7003 Series Processor
Configurable Thermal Design
Power (cTDP) Wattage
Max up to 240W
Memory
Supported DIMM Qty
(8) DIMM slots
DIMM Type / Speed
DDR4 RDIMM/LRDIMM 3200
Capacity
Up to 2TB
Memory channel
8 Channels per CPU
Memory voltage
1.2V
Expansion Slots
PCIe
(5) PCIe Gen.4 x16 slots
Pre-installed TYAN Riser Card
(PCIe Gen.4)
(1) M7129F83A-L16 riser card for
(1) PCIe Gen.4 x16 slot with PCIe Gen.4 x8 lane
LAN
Q'ty / Port
(2) 10GbE ports + (2) GbE ports +
(1) GbE dedicated for IPMI
Controller
Intel i210, X550-AT2
PHY
Realtek RTL8211E
Storage SATA
Connector
(2) SFF-8643 for (8) front SATA drives
Controller
Direct from AMD EPYC CPU
Speed
6Gb/s
RAID
N/A
Storage NVMe
Connector (M.2)
(2) 22110/2280 (by PCIe Gen.4 interface)
Connector (U.2)
(1) SFF-8654 for (2) NVMe ports
Graphic
Connector type
D-Sub 15-pin