TYAN S5567 User manual

http://www.tyan.com
1
S5567
Version 1.0
Copyright
Copyright © 2022 MITAC COMPUTING TECHNOLOGY CORPORATION. All rights
reserved. No part of this manual may be reproduced or translated without prior
written consent from MITAC COMPUTING TECHNOLOGY CORPORATION.
Trademark
All registered and unregistered trademarks and company names contained in this
manual are property of their respective owners including, but not limited to the
following.
TYAN®is a trademark of MITAC COMPUTING TECHNOLOGY CORPORATION.
Intel®is a trademark of Intel®Corporation.
AMI, AMI BIOS are trademarks of AMI Technologies.
Microsoft®, Windows®are trademarks of Microsoft Corporation.
Nuvoton®is a trademark of Nuvoton Technology Corporation.
Notice
Information contained in this document is furnished by MITAC COMPUTING
TECHNOLOGY CORPORATION and has been reviewed for accuracy and reliability
prior to printing. MITAC assumes no liability whatsoever, and disclaims any express
or implied warranty, relating to sale and/or use of TYAN®products including liability
or warranties relating to fitness for a particular purpose or merchantability. MITAC
retains the right to make changes to product descriptions and/or specifications at
any time, without notice. In no event will MITAC be held liable for any direct or
indirect, incidental or consequential damage, loss of use, loss of data or other
malady resulting from errors or inaccuracies of information contained in this
document.

http://www.tyan.com
2

http://www.tyan.com
3
Contents
Before you begin….................................................................................... 4
Chapter 1: Instruction ................................................................................ 5
1.1 Congratulations ................................................................................. 5
1.2 Hardware Specifications.................................................................... 5
1.3 Software Specifications ..................................................................... 7
Chapter 2: Board Installation..................................................................... 9
2.1 Board Image .................................................................................... 10
2.2 Block Diagram ................................................................................. 11
2.3 Mainboard Mechanical Drawing ...................................................... 12
2.4 Board Parts, Jumpers and Connectors ........................................... 13
2.5 Installing the Processor and Heat sink ............................................ 25
2.6 Thermal Interface Material .............................................................. 30
2.7 Tips on Installing Motherboard in Chassis ...................................... 31
2.8 Installing the Memory ...................................................................... 33
2.9 Attaching Drive Cables .................................................................... 36
2.10 Installing Add-In Cards .................................................................. 37
2.11 Connecting External Devices ........................................................ 38
2.12 Installing the AC/DC Adaptor ........................................................ 40
2.13 Finishing Up................................................................................... 40
Chapter 3: BIOS Setup ............................................................................. 41
3.1 About the BIOS................................................................................ 41
3.2 Main Menu....................................................................................... 43
3.3 Advanced Menu............................................................................... 45
3.3 Security............................................................................................ 60
3.4 Boot ................................................................................................. 67
3.5 Save & Exit ...................................................................................... 69
3.6 Event Logs....................................................................................... 70
Chapter 4: Diagnostics............................................................................. 75
4.1 Flash Utility ...................................................................................... 75
4.2 AMIBIOS Post Code (Aptio) ............................................................ 76
Appendix I: How to recover UEFI BIOS .................................................. 83
Appendix II: Fan and Temp Sensors ...................................................... 87
Glossary..................................................................................................... 89
Technical Support .................................................................................... 95

http://www.tyan.com
4
Before you begin…
Check the box contents!
The retail motherboard package should contain the following:
1 x S5567 Motherboard
1 x SATA Cable
1 x SATA Power Cable
1 x Rear IO Shield
1 x S5567 Quick reference guide
IMPORTANT NOTE:
Sales sample may not come with the accessory listed above.
Please contact your sales representative to help order accessory for your
evaluation.

http://www.tyan.com
5
Chapter 1: Instruction
1.1 Congratulations
You have purchased the powerful TYAN® S5567 motherboard, based on the
Intel®H610 Chipset. The S5567 is designed to support single Intel®12th Gen.
Core i9/i7/i5/i3 Processor, and up to 64GB of SO-DIMM DDR4 3200 memory.
Leveraging advanced technology from Intel®, the S5567 is capable of offering
scalable 32 and 64-bit computing, high-bandwidth memory design, and lightning-
fast PCI-E bus implementation.
The S5567 not only empowers you in today’s demanding IT environment but also
offers a smooth path for future application upgradeability. All of these rich feature
sets provides the S5567 with the power and flexibility to meet demanding
requirements for today’s IT environments.
Remember to visit the TYAN® website at http://www.tyan.com. There you can
find all the information on all TYAN®products as well as all the supporting
documentation, FAQs, Drivers and BIOS upgrades.
1.2 Hardware Specifications
TYAN S5567 (S5567G2NR)
Processor
Q'ty / Socket Type (1) LGA1700
Supported CPU Series Intel Core i9/i7/i5/i3 Processors / 12 Gen.
Thermal Design Power
Wattage
Max up to 65W (TDP)
Chipset PCH Intel H610
Super I/O NCT6126D
Memory
Supported DIMM Qty (2) DIMM slots
DIMM Type / Speed DDR4 SO-DIMM 3200
Capacity Up to 64GB
Memory channel 2 Channels per CPU
Memory voltage 1.2V
Expansion
Slots
PCIe (1) PCIe Gen.4 x16 slot
LAN
Q'ty / Port (1) GbE + (1) 2.5GbE
Controller Intel I219-LM (Intel AMT support) / Intel
I225V
Storage
SATA
Connector (1) SATA-DOM / (2) SATA
Controller Intel H610
Speed 6Gb/s
Storage Connector (M.2) (1) 2280 (by PCIe 4 interface)

http://www.tyan.com
6
NVMe
Storage
(Optional)
VROC Support No
Graphic
Display Port
Connector type (2) Display ports 1.4
Resolution Up to 4096X2304 @60Hz
Chipset Intel H610
Input
/Output
USB (2) USB2.0 ports (via cable) / (2) USB2.0
ports (@ rear) / (2) USB3.2 Gen.1 ports
(via cable) / (2) USB3.2 Gen.2 ports
(@rear)
COM (2) headers
RJ-45 (1) GbE port + (1) 2.5GbE port
SATA (2) SATA-III connectors / (1) SATA-DOM
connectors
Power DC12V / ATX 4-pin
Display port (2) Display ports 1.4
TPM
(Optional)
TPM Support Please refer to our TPM supported list.
Interface SPI
System
Monitoring
Chipset NCT6126D
Fan Total (2) 4-pin headers
Temperature Monitors temperature for CPU & system
environment
Voltage Monitors voltage for CPU, memory, chipset
& power supply
LED Processor fail LED indicator
AMT Feature Support Power on/ Power off/ Restart at
remote side
Others Watchdog timer support
BIOS
Brand / ROM size AMI / 32MB
Feature Hardware Monitor / Console Redirection /
User Configurable FAN PWM Duty Cycle /
SMBIOS 3.0/PnP/Wake on LAN / ACPI 6.1
/ ACPI sleeping states S5
Physical
Dimension
Form Factor Thin Mini-ITX
Board Dimension 6.69" x 6.69" (170 x 170mm)
Regulation
FCC (SDoC) Class B
CE (DoC) Class B
RCM Class B
VCCI Class B
Operating
Environment
Operating Temp. 0° C ~ 55° C (32° F~ 131° F)
Non-operating Temp. - 40° C ~ 70° C (-40° F ~ 158° F)
In/Non-operating
Humidity
90%, non-condensing at 35° C
RoHS RoHS 6/6 Compliant Yes

http://www.tyan.com
7
Operating
System
OS supported list Please refer to our AVL support lists.
Package
Contains
Motherboard (1) S5567 Motherboard
Manual (1) Quick Installation Guide
I/O Shield (1) I/O Shield
Cable SATA (1) SATA power cable / (2) SATA signal
cables
1.3 Software Specifications
For OS (operation system) support, please check with TYAN®support for latest
information.

http://www.tyan.com
8
NOTE

http://www.tyan.com
9
Chapter 2: Board Installation
You are now ready to install your motherboard.
How to install our products right… the first time
The first thing you should do is reading this user’s manual. It contains important
information that will make configuration and setup much easier. Here are some
precautions you should take when installing your motherboard:
(1) Ground yourself properly before removing your motherboard from the
antistatic bag. Unplug the power from your computer power supply and
then touch a safely grounded object to release static charge (i.e. power
supply case). For the safest conditions, MITAC recommends wearing a
static safety wrist strap.
(2) Hold the motherboard by its edges and do not touch the bottom of the
board, or flex the board in any way.
(3) Avoid touching the motherboard components, IC chips, connectors,
memory modules, and leads.
(4) Place the motherboard on a grounded antistatic surface or on the antistatic
bag that the board was shipped in.
(5) Inspect the board for damage.
The following pages include details on how to install your motherboard into your
chassis, as well as installing the processor, memory, disk drives and cables.
Caution!
1. To avoid damaging the motherboard and associated
components, use torque force within the range 5~7
kgf/cm (4.35 ~ 6.09 lb/in) on each mounting screw
for motherboard installation.
2. Do not apply power to the board if it has been
damaged.

http://www.tyan.com
10
2.1 Board Image
S5567
This picture is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above picture.

http://www.tyan.com
11
2.2 Block Diagram
S5567 Block Diagram

http://www.tyan.com
12
2.3 Mainboard Mechanical Drawing

http://www.tyan.com
13
2.4 Board Parts, Jumpers and Connectors
This diagram is representative of the latest board revision available at the time of
publishing. The board you receive may not look exactly like the above diagram. But
for the DIMM number please refer to the above placement for memory installation.
For the latest board revision, please visit our web site at http://www.tyan.com.

http://www.tyan.com
14
Jumpers & Connectors
Connector
1 USB3.2 Gen1 Header (USB3_HR1) 13 SYS_FAN Header (SYS_FAN1)
2 USB2.0 Header (USB2_HR1) 14 ATX Power INPUT (ATX4P)
3 INTRUDER Header (INTRUD1) 15 DC_12V INPUT (DC12IN1)
4 Front IO_PANEL Header
(FIO_PANEL1) 16 Display port_2 (DP_J2)
5 SATA Header (SATA2) 17 Display port_1 (DP_J1)
6 SATA POWER Header (SATAPWR1) 18 USB2.0 Rear Port (USB2_J1)
7 SATA Header (SATA1) 19 RJ45_2.5G (LAN225_J1)
8 SATA DOM Header (SATADOM1) 20 RTC Battery Header (XBT1)
9 COM1 Header_RS232 (COM1) 21 RJ45_1.0G (LAN219_J1)
10 COM2 Header_RS232 (COM2) 22 USB3.2 Gen2 Rear Port
(USB3_J1)
11 P2398 Card_Header (DEBUG1) 23 TPM Card Header (TPM1)
12 CPU_FAN Header (CPU_FAN1)
Jumpers Slots
aCMOS Clear Header (CMOS1) APCIEX16 Header (PCIEX16_1)
bAT/ATX Select Header (AT1) BM.2 Key_M Header (M2M)
cPEX8_16 Select Header (PEX8_16)
Jumper Legend
OPEN - Jumper OFF Without jumper cover
CLOSED - Jumper ON With jumper cover

http://www.tyan.com
15
ATX4P: ATX Power Input Header
Pin Signal
1 GND
2 GND
3 DC12V_IN
4 DC12V_IN
SATADOM1: SATA DOM Header
Pin Signal
MT1 GND
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
MT2 VCC
SATA1/SATA2: SATA Header
Pin Signal
MT1 GND
1 GND
2 TX+
3 TX-
4 GND
5 RX-
6 RX+
7 GND
MT2 GND
M2M: M.2 key-M Header (Slot)
Signal Pin Pin Signal
GND 1 2 3.3V
GND 3 4 3.3V
PERN3 5 6 N/C

http://www.tyan.com
16
PERP3 7 8 N/C
GND 9 10 LED
PETN3 11 12 3.3V
PETP3 13 14 3.3V
GND 15 16 3.3V
PERN2 17 18 3.3V
PERP2 19 20 N/C
GND 21 22 N/C
PETN2 23 24 N/C
PETP2 25 26 N/C
GND 27 28 N/C
PERN1 29 30 N/C
PERP1 31 32 N/C
GND 33 34 N/C
PETN1 35 36 N/C
PETP1 37 38 M2_DEVSLP
GND 39 40 N/C
PERN0 / SATA-B+ 41 42 N/C
PERP0 / SATA-B- 43 44 N/C
GND 45 46 N/C
PETN0 / SATA-A- 47 48 N/C
PETP0 / SATA-A+ 49 50 M2_PERST#
GND 51 52 CLKREQ5#
PE_CLK_N 53 54 M2_PE WAKE#
PE_CLK_P 55 56 N/C
GND 57 58 N/C
59 60
61 62

http://www.tyan.com
17
63 64
65 66
NC 67 68 SUSCLK
PEDER_OC-PCIE/GND-SATA 69 70 3.3V
GND 71 72 3.3V
GND 73 74 3.3V
GND 75
PCIEX16_1: PCIEX16 Header (Slot)
Signal Pin Pin Signal
12V B1 A1 PRSNT1#
12V B2 A2 12V
12V B3 A3 12V
GND B4 A4 GND
SMCLK B5 A5 JTAG2
SMDAT B6 A6 JTAG3
GND B7 A7 JTAG4
3V3 B8 A8 JTAG5
JTAG1 B9 A9 3V3
V3AUX B10 A10 3V3
WAKE# B11 A11 PERST#
RSVD_1 B12 A12 GND
GND B13 A13 REFCLK+
PETp0 B14 A14 REFCLK-
PETn0 B15 A15 GND

http://www.tyan.com
18
GND B16 A16 PERp0
PRSNT2# B17 A17 PERn0
GND B18 A18 GND
PETp1 B19 A19 RSVD_4
PETn1 B20 A20 GND
GND B21 A21 PERp1
GND B22 A22 PERn1
PETp2 B23 A23 GND
PETn2 B24 A24 GND
GND B25 A25 PERp2
GND B26 A26 PERn2
PETp3 B27 A27 GND
PETn3 B28 A28 GND
GND B29 A29 PERp3
RSVD_2 B30 A30 PERn3
PRSNT2#_2 B31 A31 GND
GND B32 A32 RSVD_5
PETp4 B33 A33 RSVD_6
PETn4 B34 A34 GND
GND B35 A35 PERp4
GND B36 A36 PERn4
PETp5 B37 A37 GND
PETn5 B38 A38 GND
GND B39 A39 PERp5
GND B40 A40 PERn5
PETp6 B41 A41 GND

http://www.tyan.com
19
PETn6 B42 A42 GND
GND B43 A43 PERp6
GND B44 A44 PERn6
PETp7 B45 A45 GND
PETn7 B46 A46 GND
GND B47 A47 PERp7
PRSNT2#_3 B48 A48 PERn7
GND B49 A49 GND
PETp8 B50 A50 RSVD_7
PETn8 B51 A51 GND
GND B52 A52 PERp8
GND B53 A53 PERn8
PETp9 B54 A54 GND
PETn9 B55 A55 GND
GND B56 A56 PERp9
GND B57 A57 PERn9
PETp10 B58 A58 GND
PETn10 B59 A59 GND
GND B60 A60 PERp10
GND B61 A61 PERn10
PETp11 B62 A62 GND
PETn11 B63 A63 GND
GND B64 A64 PERp11
GND B65 A65 PERn11
PETp12 B66 A66 GND
PETn12 B67 A67 GND
GND B68 A68 PERp12

http://www.tyan.com
20
GND B69 A69 PERn12
PETp13 B70 A70 GND
PETn13 B71 A71 GND
GND B72 A72 PERp13
GND B73 A73 PERn13
PETp14 B74 A74 GND
PETn14 B75 A75 GND
GND B76 A76 PERp14
GND B77 A77 PERn14
PETp15 B78 A78 GND
PETn15 B79 A79 GND
GND B80 A80 PERp15
PRSNT2#_4 B81 A81 PERn15
RSVD_3 B82 A82 GND
TPM1: TPM Card Header
Signal Pin Pin Signal
SPI_CLK 1 7 3VSB
PLTRST_N 2 8 TPM_DET
SPI_MOSI 3 9 TPM_PIRQ_N
SPI_MISO 4 10 VCC3_TPM
SPI_CS2_N 5 11 GND
NC 6
SYS_FAN1/CPU_FAN1: System FAN Header, CPU FAN Header

Pin Signal
1 GND
2 12V
3 FAN TACH
4 FAN Control (PWM)