Ubiquiti UniFi User manual

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
UniFi Security Gateway Power Adapter (12V, 1A) Power Cord
Screws (Qty. 2) Screw Anchors (Qty. 2)
Package Contents
UniFi Controller System Requirements
Microsoft Windows 8, Mac OS X, or Linux
Java Runtime Environment 1.6 (or above)
Web Browser: Mozilla Firefox, Google Chrome, Microsoft Edge, or Microsoft Internet
Explorer 11
UniFi Controller software v5.4 or higher (available at: ui.com/download/unifi)
Hardware Overview
Ports Panel
USG Quick Start Guide

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
Console
Reset
WAN 1 Port
LAN 1 Port
WAN 2 / LAN 2 Port
RJ45 serial console port for CLI management. Use a RJ45-to-DB9 serial console cable to
connect the Console port to your computer. Then configure using the following settings:
Baud rate 115200
Data bits 8
Parity NONE
Stop bits 1
Flow control NONE
Resets to factory defaults. The UniFi Gateway should be powered on. Press and hold the Reset
button for about 10 seconds until the right LED on the WAN 2 / LAN 2 port starts flashing and
then becomes solidly lit. After a few seconds, the LED will turn off, and the UniFi Gateway will
automatically reboot.
Supports 10/100/1000 Ethernet WAN connections. Default setting is DHCP client.
Supports 10/100/1000 Ethernet LAN connections. Default setting is DHCP Server.
Server IP: 192.168.1.1/24
Supports 10/100/1000 Ethernet connections. Configure the port using the UniFi Gateway
configuration interface.
LEDs

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
System LED
Power LED
Speed/Link/Act LED
Click here for detailed descriptions.
Off Power Off
Green Power On
Off No Link
Amber Link Established at 10/100 Mbps
Amber Flashing Link Activity at 10/100 Mbps
Green Link Established at 1000 Mbps
Green Flashing Link Activity at 1000 Mbps
Hardware Installation
Wall-Mounting (Optional)
1.

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
2.

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
3.

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
4.

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
Connecting Power
1.

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
2.
Network Connections
1.
2.

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
Software Installation
Download the latest version of the UniFi Controller software at: ui.com/download/unifi
From a management station connected to the same Layer-2 network, launch the installer and
follow the on-screen instructions.
Note: If you already have UniFi Controller v5.4 or higher installed, go to the section,
Adopting the UniFi Gateway.
After you have installed the software and run the UniFi Installation Wizard, a login screen will
appear for the UniFi Controller management interface. Enter the username and password
that you created and click Sign In.

USG Quick Start Guide
https://dl.ubnt.com/qsg/USG/USG_EN.html[10/8/2019 8:07:47 AM]
You can manage your network and view network statistics using the UniFi Controller
management interface. For information on using the UniFi Controller software, refer to the
User Guide located on our website at: ui.com/download/unifi
Adopting the UniFi Gateway
1. From the UniFi Controller dashboard, click Devices in the left menu bar.