Ubiquiti AirCube ACB-AC User manual

Dual-Band 802.11ac Wi-Fi
Access Point with PoE In/Out
Model: ACB-AC

Introduction
Thank you for purchasing the airMAX® airCube™AC Access Point. This
Quick Start Guide is designed to guide you through installation and also
includes warranty terms.
Package Contents
Dual-Band 802.11ac Wi-Fi
Access Point with PoE In/Out
Model: ACB-AC
airCube AC Access Point Quick Start Guide
Power Adapter

Hardware Overview
Access Point Front
LED
The LED lights up when the airCube is powered on.

Access Point Back
LAN Ports
WAN Port
Power Port
1-3 Three Gigabit Ethernet ports available to connect
10/100/1000 Mbps devices to the Internet. Port 1 also
allows 24V PoE In and can be used to power the airCube.
WAN
24V PoE OUT
Connects to and powers a 24V PoE airMAX device.
The Power Adapter connects to this port.

Hardware Installation
1. Connect one end of an Ethernet cable to the WAN Port on the back
of the airCube. Connect the other end of the Ethernet cable to your
airMAX CPE radio.

2. Connect the Power Adapter to the Power Port on the back of the
airCube.

3. Plug the other end of the Power Adapter into a power outlet.

4. The LED in the base of the airCube will light up when the device is
powered on.

UMobile App
The airCube can be installed and configured using the UMobile app
on your mobile phone or tablet. Follow these steps to ensure proper
installation:
1. Download and install the U Mobile app from the AppStore (iOS) or
Google Play™ (Android).
Ensure that Wi-Fi is enabled on your mobile phone or tablet.
2. Launch the UMobile app and proceed to the section that corresponds
with your mobile device: Android Users or iOS Users.

Android Users
1. Tap the icon to add a new device to UMobile.
2. Select Discover to scan for devices on the active Wi-Fi networks in
range.
3. Tap the airCube device from the list. UMobile will activate a QR scanner
using the camera function on your mobile device.
4. Scan the QR code located on the bottom of the airCube. Once the QR
code is scanned, UMobile will return to the main app screen.
5. Proceed to the section: Verify Connection to airCube