Ubiquiti UAP-AC-PRO User manual

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]
UniFi AP AC Pro Mounting Bracket Ceiling Backing Plate
Flat Head Screws (Qty. 4) Keps Nuts (Qty. 4) Screws (Qty. 4)
Screw Anchors (Qty. 4) Cable Feed Plug Gigabit PoE* (48V, 0.5A) with
Mount Bracket
Power Cord*
Package Contents
UAP-AC-PRO Quick Start Guide

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]
* Included only in the single-pack of the UAP-AC-PRO
Installation Requirements
Phillips screwdriver
Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)
Cat5/6 UTP cable for indoor installations
IMPORTANT: The UAP-AC-PRO requires the UniFi Controller v5.4 or higher, available
at: ui.com/download/unifi
Outdoor Installation Requirements
IMPORTANT: The UAP-AC-PRO may be installed outdoors under an eave or other
protected location. Do not install the UniFi AP in an open environment.
Mounting location should be at least 60 cm (2 ft) from the edge of the eave or ceiling.
Cable feed opening must be directed away from the open environment.
Cable feed must be pointed downwards when wall-mounted.
Shielded Category 5 (or above) cabling with drain wire should be used for all outdoor
wired Ethernet connections and should be grounded through the AC ground of the PoE.
We recommend that you protect your networks from harmful outdoor environments and
destructive ESD events with industrial-grade, shielded Ethernet cable from Ubiquiti. For
more details, visit ui.com/toughcable
System Requirements
Linux, Mac OS X, or Microsoft Windows 7/8/10
Java Runtime Environment 1.8 or above recommended
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.4 or newer (available at: ui.com/download/unifi)
Hardware Overview
LED
Ports

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]
Security Slot
Secondary
Reset
USB
Main
If you need to remove the UniFi AP from the Mounting Plate, insert the included Release
Tool in the Security Slot to release the Lock Tab and turn the UniFi AP counterclockwise.
The Secondary port is a Gigabit Ethernet port used for bridging.
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than five
seconds.
The USB port is reserved for future use.
The Main port is a Gigabit Ethernet port used to connect the power and should be
connected to the LAN and DHCP server.

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]
Hardware Installation
The UniFi AP can be mounted on the wall or ceiling. Perform the steps for the appropriate
installation:
Wall Mount
1.
2.

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]
3.

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]
Optional

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]
4.

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]
5.

UAP-AC-PRO Quick Start Guide
https://dl.ubnt.com/qsg/UAP-AC-PRO/UAP-AC-PRO_EN.html[12/19/2019 1:27:41 PM]
6.