Ubiquiti UniFi nanoHD AP User manual

UniFi nanoHD AP Mounting Bracket Ceiling Backing Plate
Screws (Qty. 4) Flat Head Screws (Qty. 4) Keps Nuts (Qty. 4)
Package Contents
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Screw Anchors (Qty. 4) Gigabit PoE* (48V, 0.3A) with
Mount Bracket
Power Cord*
* Included only in the single-pack of the UAP-nanoHD.
Installation Requirements
CAT5 cable
Phillips screwdriver
Drill and drill bit (6 mm for wall-mounting or 3 mm for ceiling-mounting)
Optional: Drywall or keyhole saw (to cut 18 mm hole for Ethernet cable feed)
IMPORTANT: The UAP-nanoHD requires the UniFi Controller v5.7 or higher,
available at: ui.com/download/unifi
System Requirements
Microsoft Windows 7/8/10, Mac OS X, or Linux
Java Runtime Environment 1.8 (or above)
Web Browser: Google Chrome (Other browsers may have limited functionality.)
UniFi Controller software v5.7 or higher (available at: ui.com/download/unifi)
Hardware Overview
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Locking Notch
LED
Ports
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Reset
Ethernet
Cable Feed Plug
The Locking Notch will be used with the Mounting Bracket to help secure the UniFi
AP. (This is described further in the Mounting Bracket section.)
The Reset button serves two functions for the UniFi AP:
Restart Press and release the Reset button quickly.
Restore to Factory Default Settings Press and hold the Reset button for more than
five seconds.
This Gigabit Ethernet port is used to connect the power and should be connected to
the LAN and DHCP server.
If your Ethernet cable feeds along the mounting surface, remove the Cable Feed
Plug.
Mounting Bracket
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Locking Tab
During installation, the Locking Tab on the Mounting Bracket moves from the Initial
Position to the Final Position, where the Locking Tab fits securely into the Locking
Notch on the UniFi AP to help prevent theft.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Initial Position Final Position
Note: If you need to remove the UniFi AP from the Mounting Bracket,
insert a paper clip in the Slot to release the Locking Tab and turn the UniFi
AP counterclockwise.
Hardware Installation
The device can be mounted on the wall or ceiling. Perform the steps for the appropriate
installation.
Wall Mount
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Optional
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

4.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Optional
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

5.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

6.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

7.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

Ceiling Mount
1.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

2.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

3.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

4.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD

5.
Create PDF in your applications with the Pdfcrowd HTML to PDF API PDFCROWD