Ublox BMD-34 Series User manual

Quick start BMD-34x evaluation
Copyright © 2019, u-blox AGUBX-19042254 - R01
J-Link
debug USB
Interface
BMD-34x
module
J5
Target
debug
interface
Power
switch
4 user
buttons
J8
J6 J7 J9
For BMD-340 and BMD-341
Reset button
NFC
antenna
connector
BMD-34x
USB interface
External
power
LEDs 1-4 &
RGB LED
LiPo
battery
connector
J10

Useful links
• BMD-34x-EVAL user guide:
www.u-blox.com/docs/UBX-19033356
• Nordic Semiconductor doc library:
infocenter.nordicsemi.com
• SEGGER Embedded Studio and J-link:
segger.com/embedded-studio
segger.com/jlink-software.html
More information
For more information regarding the
BMD-34x evaluation kits, contact your
nearest u-blox support:
www.u-blox.com/
contact-technical-support.html
Getting started
1. Download and install the SEGGER
J-Link software.
2. Download and install the SEGGER
Embedded Studio.
3. Download the Nordic nRF5 SDK,
version v15 or newer.
4. Extract the SDK to a convenient
working location.
Kit includes
• BMD-34x evaluation board
• Micro-USB cable
• NFC antenna
• 2.4 GHz antenna kit (BMD-341 only)
UBX-19042254 - R01