Ublox EVK-NINA-B3 Series User manual

Software installation
The EVK-NINA-B3 software and docu-
mentation is available at www.u-blox.
com/evk-search. Supported Windows
operating systems are Vista, 7, 8, and 10.
1. Download latest s-center software; run
the executable following the instruc-
tions.
2. When the installation is complete, nd
the s-center menu under Windows
Start button, All Programs > u-blox
3. In the s-center menu, you will nd the
s-center application, user guide and
uninstall options.
Quick Start EVK-NINA-B3
Copyright © 2019, u-blox AGUBX-18020772 - R03
USB connector
NINA-B3
module
U.FL
connector
UART LEDs
Status LED
RESET button
(SW0)
User buttons
(SW1, SW2)

Kit includes
• EVK-NINA-B3 board
• NFC cable
• USB cable
• 2.4 GHz external antenna*
* EVK-NINA-B311 and EVK-NINA-B301 only
More information
The EVK-NINA-B30x kits are used as
open CPU platforms to develop custom
applications. See the NINA-B3 System
Integration Manual.
For more information regarding
EVK-NINA-B3, contact your nearest
u-blox support: www.u-blox.com/support
Driver installation
1. Connect the EVK-NINA-B3 board to
your PC using the included USB cable.
2. Verify that the USB drivers are in-
stalled successfully.
NOTE: In case the drivers are not in-
stalled automatically, refer to the
EVK-NINA-B3 User Guide.
3. Once the drivers are installed, a COM
port is enabled in Windows. Use the
Windows Device Manager to view the
port number (COM #) for the USB
serial port.
For EVK-NINA-B311 and EVK-NINA-B301
(with external antenna), attach the
antenna to the U.FL connector.
UBX-18020772 - R03