ULTIMATE SPEED USML 3.7 A1 User manual

OS
IAN 403811_2201
MOBILNÍ NABÍJECÍ STANICE
Návod k obsluze a bezpečnostní pokyny
Originální návod k obsluze
MOBILNA STACJA ŁADOWANIA
Wskazówki dotyczące montażu, obsługi i bezpieczeństwa
Tłumaczenie oryginalnej instrukcji eksploatacji
CZ PL
MOBILNÁ NABÍJACIA STANICA
Návod na obsluhu a bezpečnostné upozornenia
Originálny návod na obsluhu
ESTACIÓN DE CARGA MÓVIL
Instrucciones de funcionamiento y de seguridad
Traducción del manual de funcionamiento original
SK ES
MOBIL TÖLTŐÁLLOMÁS MOBILNA POLNILNA POSTAJA
Kezelési és biztonsági hivatkozások
Az eredeti használati utasítás fordítása
HU
Navodila za upravljanje in varnostna opozorila
Prevod originalnega navodila za uporabo
SI
STATION DE CHARGE MOBILE
Consignes d’utilisation et de sécurité
Traduction du mode d’emploi d‘origine
MOBIEL LAADSTATION
Bedienings- en veiligheidsinstructies
Vertaling van de originele bedieningshandleiding
FR BE CH NL BE
MOBILE CHARGING STATION
Operation and Safety Notes
Translation of the original instructions
MOBILE LADESTATION
Bedienungs- und Sicherheitshinweise
Originalbetriebsanleitung
GB IE NI CY MT DE AT CH
MOBIL LADESTATION
Brugs- og sikkerhedsanvisninger
Oversættelse af den originale driftsvejledning
STAZIONE DI RICARICA MOBILE
Istruzioni di montaggio, utilizzo e sicurezza
Traduzione delle istruzioni d’uso originali
DK IT
MOBILE CHARGING STATION USML 3.7 A1
MOBILE LADESTATION USML 3.7 A1
STATION DE CHARGE MOBILE USML 3.7 A1
MTCH

GB IE NI CY MT
Before reading, unfold the page containing the illustrations and familiarise yourself with all functions of
the device.
DE AT CH
Klappen Sie vor dem Lesen die beiden Seiten mit den Abbildungen aus und machen Sie sich
anschließend mit allen Funktionen des Gerätes vertraut.
FR BE CH
Avant de lire le document, allez à la page avec les illustrations et étudiez toutes les fonctions de l’appareil.
NL BE
Klap, voordat u begint te lezen, de pagina met afbeeldingen uit en maak u aansluitend vertrouwd met
alle functies van dit apparaat.
CZ
Než začnete číst tento návod k obsluze, rozložte stránku s obrázky a seznamte se se všemi funkcemi
zařízení.
PL
Przed przeczytaniem proszę rozłożyć stronę z ilustracjami, a następnie proszę zapoznać się
zwszystkimi funkcjami urządzenia.
SK
Prv než začnete čítať tento návod, rozložte si stranu s obrázkami a potom sa oboznámte so všetkými
funkciami zariadenia.
ES
Antes de leer, abra la página con las ilustraciones y familiarícese con todas las funciones del dispositivo.
DK
Før du læser, vend siden med billeder frem og bliv bekendt med alle apparatets funktioner.
IT
Prima di leggere aprire la pagina con le immagini e prendere confidenza con le diverse funzioni
dell’apparecchio.
HU
Olvasás előtt hajtsa ki az ábrát tartalmazó oldalt, és ezután ismerje meg a készülék mindegyik funkcióját.
SI
Pred branjem odprite stran s slikami in se nato seznanite z vsemi funkcijami naprave.
GB/IE/NI/CY/MT Operation and Safety Notes Page 5
DE/ AT / CH Montage-, Bedienungs- und Sicherheitshinweise Seite 21
FR/ BE / CH Consignes d’utilisation et de sécurité Page 39
NL/ BE Bedienings- en veiligheidsinstructies Pagina 57
CZ Návod k obsluze a bezpečnostní pokyny Strana 74
PL Wskazówki dotyczące montażu, obsługi i bezpieczeństwa Strona 90
SK Návod na obsluhu a bezpečnostné upozornenia Strana 108
ES Instrucciones de funcionamiento y de seguridad Página 124
DK Brugs- og sikkerhedsanvisninger Side 141
IT/MT/CHIstruzioni di montaggio, utilizzo e sicurezza Pagina 157
HU Kezelési és biztonsági hivatkozások Oldal 175
SI Navodila za upravljanje in varnostna opozorila Stran 192
MTCH

16A
13A
10A
8 A
6 A
230.0 V
0.00kWh
00:00:00
0.00kW
A
B
1 3 4
76
8
9
5
2
11
12
13
14
15
10

5
GB/IE/NI/CY/MT
Table of pictograms used ............................................ Page 6
Introduction .................................................................... Page 7
Intended use ...................................................................... Page 7
Scope of delivery ............................................................... Page 8
Equipment ......................................................................... Page 8
Technical Specifications....................................................... Page 9
Safety instructions......................................................... Page 9
Specific safety instructions.......................................... Page 11
Using the device ............................................................ Page 12
Cleaning .......................................................................... Page 16
Storage ............................................................................ Page 17
Information about recycling and disposal .............. Page 17
EC Declaration of Conformity ..................................... Page 18
Warranty and service information ........................... Page 19
Warranty conditions ........................................................... Page 19
Warranty period and statutory claims for defects.................... Page 19
Extent of warranty............................................................... Page 20
Processing of warranty claims .............................................. Page 20
Service.............................................................................. Page 21

6GB/IE/NI/CY/MT
Table of pictograms used
Read the operating
instructions! Not suitable for use in IT-systems
Observe warnings and
safety instructions!
Warning:
Risk of electric shock!
Danger to life!
Note 50 Hz Frequency of 50 Hertz
Dispose of batteries
in an environmentally
friendly manner!
You are legally obliged
to place devices marked
as such in a collection
which is separate from
unsorted municipal
waste. Disposal through
household waste is
prohibited.
-25 Lowest ambient
temperature -25°C
Dispose of the device
and packaging in an
environmentally friendly
manner!
Appliance class I IP65 Protection type
ta= 45 °C Highest rated ambient
temperature 45 °C VA C Alternating voltage
in volt
Made from recycled
material
IC-CPD with
non-switched protective
conductor
Do not jam the cable Do not pull by the cable

7
GB/IE/NI/CY/MT
MOBILE CHARGING
STATION USML 3.7 A1
zIntroduction
Congratulations! You have
purchased one of our high-quality
products. Please familiarise yourself
with the product before using it for
the first time. To do so, please read
through the following operating and
safety instructions carefully.
KEEP OUT OF THE REACH OF
CHILDREN!
The charger is only
suitable for electric and
hybrid cars with a type
2 plug.
zIntended use
Using the charging cable, electric
and hybrid cars, hereafter referred
to as “cars”, can be charged from
Table of pictograms used
Do not drive
over the cable
CMC
Do not step on the cable
Do not drive
over the plug Do not step on the plug
Do not kink the cable Wind up and unwind
the cable properly
Do not touch contacts.
Do not put any sharp
objects into the contacts
Caution! Do not allow
the plug and cable
to come into contact
with moisture/water.
Keep the plug away
from fire
Keep the plug clean.
Prevent insects from
getting in.
Do not touch cables
with wet hands
Always protect the plug
with the cover cap,
whenever it is not being
used.

8GB/IE/NI/CY/MT
a charging infrastructure intended
for this purpose, or a 230 V socket.
Any other use is not permitted and is
therefore regarded as improper use.
The mobile charging station 1is
only safe, if these operating instruc-
tions and the documentation for the
car are followed.
Before using the mobile charging
station 1, you must read the operat-
ing instructions and the documenta-
tion for the car.
When the mobile charging station
1is being used, observe the instruc-
tions as described.
Failure to do this can lead to per-
sonal injury or damage to property,
such as, for example, electric shock,
short circuit or fire.
Any other use may cause damage
to the device and expose the user
to a risk of serious injury. The
manufacturer is not liable for any
injury or damage resulting from
improper use.
Note: In case of doubt, get a
qualified electrician to check that
the charging infrastructure or 230 V
socket is suitable.
The device has been developed for
consumer use and is not suitable for
use in a commercial or industrial
environment. The product must only
be started up initially by people
who have been trained to do so.
zScope of delivery
1 Mobile charging station
1 Operating instructions
zEquipment
For this see Fig. A, B:
After unpacking the product,
please check that all of the
package contents are pres-
ent and that the mobile charging
station is in perfect condition
1
. Do
not use the device if it is defective.
1Mobile charging station
2LED strip
3Digital charging display
4Button
5Mains cable
6Charging cable – electric car
7Mains plug
8Cover cap for T2 plug
9T2 plug
10 Charge current
11 Connection
12 Charging time
13 Energy supplied
14 Charging voltage
15 Charging capacity
Note: The use of the term “product”
or “device” in the following text
refers to the mobile charging station
named in these operating instruc-
tions 1.

9
GB/IE/NI/CY/MT
zTechnical Specifications
Model: USML 3.7 A1
Operating
temperature: -25°C – 45°C
Input voltage: 230 V~ 50 Hz
Max. input current: 16 A
Output voltage: 230 V~ 50 Hz
Max. output current: 16 A
Charging capacity: 1.38–3.7 kW
Total length: 500 cm
Housing protection type: IP65
Trigger characteristic: Type A
Residual current
detection: 30 mA
Residual current detection: 6 mA DC
Appliance class: I
Input plug: Schuko
Output plug: T2
(in accordance with EN 62196-2)
Power system: TN-C, TN-S
Changes to technical and visual
aspects of the product may be
made as part of future developments
without notice. Accordingly,
no warranty is offered for the
physical dimensions, information
and specifications in these operating
instructions. The operating instruc-
tions cannot therefore be used as the
basis for asserting a legal claim.
zSafety instructions
PLEASE READ
THROUGH THE OPER-
ATING INSTRUCTIONS
CAREFULLY BEFORE USE.
THESE FORM PART OF THE
PRODUCT AND MUST BE
AVAILABLE AT ALL TIMES!
This section covers the basic
safety instructions applicable
when working with the device.
Personal safety:
Keep children and animals
away from the mobile
charging station 1.
Do not allow children to play
with the device. Cleaning
and day-to-day maintenance
must not be performed by
children without supervision.
Children must be supervised
to ensure that they do not
play with the device.
Within the working area, the
user is responsible for any
damage or injury to third
parties that was caused by
the use of the device.
During operation, never point
the device at yourself or other
individuals, and keep the
device well way from your
ears and eyes. There is a risk
of injury!
Keep the device in a dry
location and out of the reach
of children.

10 GB/IE/NI/CY/MT
This helps prevent device
damage and possible
personal injuries that
could result from it:
Working with the device:
Do not use the device while
driving the vehicle.
Before setup or first use,
check the device for any dam-
age and do not use unless in
perfect working order.
Do not submerge the device
in water. There is a risk of
electric shock!
Keep the vent on the
underside of the device
clear during operation. Do
not block the vent with your
hands or fingers, and do not
cover the device. Keep the
opening clear and clean at
all times. Do not block or
stick anything over the open-
ing. Do not poke objects into
the holes. There is a risk of
overheating!
Take care to ensure that sand,
dust and other small foreign
objects cannot enter the air
inlet or air outlet openings.
In hot weather, do not
leave the device in the car.
This could permanently
damage the device.
The device becomes warm
during use. There is a risk of
burn injuries from touching
the hot surfaces.
Do not operate the device
near to flammable liquids or
gases. Do not use the device
to draw in hot fumes. Failure
to do so risks causing a fire
or explosion!
Switch the device off and
remove the mains plug from
the socket in the following
cases:
–when you are not using the
device;
–if you are doing cleaning
work;
–if the connection cable is
damaged;
–if foreign objects have
got into the device or you
notice unusual noises.
Only use the accessories
supplied and recommended
by the manufacturer.
Do not dismantle or modify
the mobile charging station
1. This device must only be
repaired by a maintenance
technician.
Do not use the device in
areas with a risk of explo-
sion, e.g. near flammable

11
GB/IE/NI/CY/MT
liquids, gases or powders.
Do not expose the device to
any source of heat.
Do not store in places
where the temperature can
exceed 70 °C.
Do not connect the charging
cable to a faulty or unsuitable
socket, which, for example,
is not designed for the
continuous use required.
Protect the plug connections
and plug devices from
moisture and liquids.
Do not step on or drive over
plugs, charging cable and
connecting cables.
Do not jam or kink charging
and connection cables.
Do not touch plugs with
wet hands.
When the device is not being
used, always put the cover
caps 8on the plugs 9.
The device must not be used
if it is not possible to operate
it properly in accordance
with the instructions. Ask the
manufacturer, a responsible
dealer or an electrician for
advice.
CAUTION: How to
avoid accidents and
injuries resulting from
electric shock:
Electrical safety:
Do not carry the device by
the cable. Do not unplug
the plug from the socket
by pulling on the cable.
Protect the cable from heat,
oil and sharp edges.
If the cable is damaged,
unplug the plug immediately
from the socket. A damaged
charging cable can lead to
death or serious injuries.
Before each use, check the
charging cable for damage
(e.g. cracks). Do not use
damaged charging cables.
Do not short circuit the
contacts on the T2 plug.
This can lead to a hazardous
situation!
Do not put fingers or sharp
objects into the plug contacts.
Do not hold the plug under
water or submerge it in water.
zSpecific safety
instructions
Before operation, the device
carries out an automatic self
test and checks internal com-
ponents, possible residual
currents, over or under volt-

12 GB/IE/NI/CY/MT
age and temperature.
A charging process is then
only possible if all test criteria
have been met.
Do not use adapter plugs or
extension cables. The device
must be plugged directly into
the fixed socket.
The electrical system
and the socket, which
are provided for charging
electric cars, must be
checked by an electrician
before use.
Only use the device in an
ambient temperature between
-25 °C and 45 °C.
Only use mobile charging
stations 1up to height of
4,000 m above sea level.
A slightly higher temperature
during charging is
absolutely normal and
not a malfunction.
Protect the mobile charging
station 1from moisture
and high temperatures,
including fires.
Store the mobile charging
station 1in a dry place
and protect the device from
moisture and corrosion.
Do not drop the mobile
charging station 1while
it is being used.
The mobile charging station
1is designed for electric
cars with type 2 plug (in
accordance with EN 62196-2).
When using the mobile
charging station 1make sure
that the connector plugs 7
and 9are securely in place.
There is a hole for hanging the
charger on the wall. It’s highly
recommended that the user hangs
the charger on the wall for nor-
mal usage. If not, please make
sure the height of the wall socket
from the ground is no longer
than the length of the input wire
to avoid strain on plug 7and
socket.
Electromagnetic
compatibility
The Mobile Charging Station
meets the requirements for use
in residential areas according to
EN 61000-6-3:2020.
zUsing the device
Start the charging process:
 Unwind the charging cable 6.
 Plug the mains plug 7into the
230 V mains socket.
The digital charging display 3
indicates that a car is not yet
connected:

13
GB/IE/NI/CY/MT
The left part of the LED strip 2
flashes and indicates that
charging is not taking place.
 Remove the protective cap 8
from the plug 9on the car side.
 Plug the plug 9into the car.
The digital charging display 3
indicates that a car is connected:
The left part of the LED strip 2
continues to flash.
 Start the charging process on
the car, if you want to charge
immediately, without using the
car’s timer.
 Selecting the charge current:
each time you press the button
4a different charge current will
be displayed (charge current 10
on the display 3). The following
charge currents can be selected:
6 A (approx. 1.4 kW at 230 V)
8 A (approx. 1.8 kW at 230 V)
10 A(approx. 2.3 kW at 230 V)
13 A(approx. 3.0 kW at 230 V)
16 A(approx. 3.7 kW at 230 V)
If the button 4is not pressed for
5 seconds, the selection is con-
firmed. The last selected charge
current will always be stored.
 The charging process will now
be activated as long as the car’s
charging timer is deactivated.
The digital charging display 3
indicates that the car is being
charged:
The LED strip 2continually lights
up from left to right and this
indicates that current is flowing
into the car.
Otherwise the charging process
will start at the time programmed
in the car. In this case, the digital
charging display 3indicates that
a car is connected:
The left part of the LED strip 2
continues to flash.
Some cars carry out a test charge
first for a few seconds. In this
case the digital charging display
3indicates that the mobile
charging station is ready to
charge at the time programmed
in the car:
Other cars take a very low

14 GB/IE/NI/CY/MT
charge current, before the actual
charging at the time programmed
in the car. In this case the digital
charging display 3already
indicates that the car is being
charged:
The LED strip 2continually lights
up from left to right and this
indicates that current is flowing
into the car.
The display 3shows the charg-
ing time 12, the energy supplied
13, and the charging capacity 15.
Finish the charging process
and disconnect the mobile
charging station 1:
 The charging process will stop
automatically at the time pro-
grammed in the car. The digital
charging display 3indicates that
the charging process is complete:
The full LED strip 2lights up.
 If the charging timer in the car
is deactivated, then finish the
charging process in the car.
 The charging process will stop.
The digital charging display 3
indicates that the charging
process is complete:
The full LED strip 2lights up.
On the display 3you can read
off the charging time 12 and the
energy supplied 13.
 Unplug the plug 9from the car
and put the cover cap 8on the
plug 9.
 Then unplug the mains plug 7
from the 230 V socket.
 Wind up the charging cable 6
without kinks.
 Store the mobile charging station
1in its packaging and keep it in
the car in an orderly way.
Finish the charging process at
the mobile charging station 1:
 If, during charging, the button 4
is pressed for approx. 5 seconds,
the charging process will stop.
The digital charging display 3
indicates that the charging
process is complete:
The full LED strip 2lights up.
On the display 3you can read
off the charging time 12 and the
energy supplied 13. By pressing
it again for approx. 5 seconds,
a new charging process can be

15
GB/IE/NI/CY/MT
activated. The digital charging
display 3indicates that a car is
connected:
The left part of the LED strip 2
flashes.
The charge current can be
selected again by pressing the
button 4within 5 seconds.
However if you want to discon-
nect the mobile charging station
1from your car, proceed as
follows:
 Finish the charging process on
the car.
 Unplug the plug 9from the car
and put the cover cap 8on the
plug 9.
 Then unplug the mains plug 7
from the 230 V socket.
 Re-wind the charging cable
properly afterwards and when
doing this, making sure that the
cable is not kinked.
 Now store the mobile charging
station 1properly in the packag-
ing and keep it in the car.
Voltage failure:
If there is a voltage failure, the
charging process will automatically
resume once the voltage returns.
Error messages:
Fault Meaning Solution
ERROR 1 The temperature
is too high.
(the temperature
in the housing has
increased to over
70 °C)
Disconnect from the car and mains.
Wait until the housing temperature
has dropped, then start the charging
process again.
ERROR 2 Charge current
is too high
(the charge current
is 2A higher than
the set value)
Disconnect from the car and mains.
Then start the charging process again.
ERROR 3 Residual current
(residual current is
greater than 6 mA
DC or 30 mA)
Disconnect from the car and mains.
Then start the charging process again.

16 GB/IE/NI/CY/MT
zCleaning
Attention: The device must
not be submerged in water.
There is a risk of injury due
to electric shock if moisture
enters the device.
 Do not use cleaners or solvents.
These could damage the device
ERROR 4 Self test failed Disconnect from the car and mains.
Then start the charging process again.
If the fault should occur again, return
the mobile charging station 1to the
dealer for repair.
ERROR 5 Under voltage
(input voltage
below 185 V)
Disconnect from the car and mains.
Wait until the mains voltage rises to
over 195 V. Then start the charging
process again.
ERROR 6 Over voltage
(input voltage is
over 275 V)
Disconnect from the car and mains.
Wait until the mains voltage drops to
below 265 V. Then start the charging
process again.
ERROR 7 Internal component
fault (relay) Disconnect from the car and mains.
Return the mobile charging station 1
to the dealer for repair.
ERROR 8 The temperature on
the Mains plug 7
is too high.
(temperature in the
mains plug 7is
over 80°C)
Disconnect from the car and mains.
Wait until the temperature in the mains
plug has dropped below 70 °C.
Then start the charging process again.
ERROR 9 Possible fault in
the car electronics
(diode)
Disconnect from the car and mains.
Then start the charging process again.
ERROR 10 Short circuit cables
(CP to PE) Disconnect from the car and mains.
Then start the charging process again.

17
GB/IE/NI/CY/MT
beyond repair.
 Keep the housing and device
accessories clean.
 Use a damp cloth or a soft brush
to clean the device and the
accessories.
zStorage
 Keep the device in a dry location
and out of the reach of children.
 To avoid damage, take care to
ensure that the charging cable 6
does not become kinked.
zInformation about
recycling and disposal
Do not dispose of electri-
cal tools in household
waste! Don’t throw
away – recycle!
According to European Directive
2012/19/EU, used electrical
devices must be collected separately
for environmentally compatible
recycling or recovery. Electrical
and electronic devices which have
become waste are called old
devices. Owners of old devices are
obliged to place them in a collection
which is separate from unsorted
municipal waste. Owners of old
devices have old batteries and old
rechargeable battery packs, which
are not enclosed by the old device,
as well as bulbs which must be sep-
arated
from the device before it is handed
in at a collection point. This does
not apply if the old devices are
handed in to public waste disposal
authorities and they are separated
from other old devices there for
the purposes of preparation for
recycling. If you are unsure, please
contact an independent specialist.
Owners of old devices from private
households can hand these in to
collection points for public waste
disposal authorities or collection
points which have been set up by
manufacturers or distributors in line
with the ElektroG (German disposal
of electrical equipment act). The
disposal of defective devices which
you have sent in will be carried out
free of charge. You can also return
the old device to your Lidl branch,
free of charge. As the end user, it
is your responsibility to delete any
personal information on the old
devices to be disposed of.
Please return this
device, accessories and
packaging to your local
recycling depot.
This device is marked in
accordance with the
2012/19/EU directive on old
electronic and electrical devices
(WEEE). The symbol of the “crossed
out dustbin” means that you are
legally obliged to place these

18 GB/IE/NI/CY/MT
devices in a collection which is
separate from unsorted municipal
waste. Disposal through household
waste is prohibited. Batteries con-
taining harmful substances are
labelled with the adjacent symbol,
which indicates the prohibition on
disposal in household waste. The
abbreviations for the relevant heavy
metals are: Cd = cadmium, Hg =
mercury, Pb = lead.
Take used batteries to a waste
management company in your city
or community or return them to
your dealer. This satisfies your legal
obligations while also making an
important contribution to protecting
the environment.
Please note the marking on
the different packaging
materials and separate them
as necessary. The packaging
materials are marked with abbrevia-
tions (a) and digits (b) with the
following definitions: 1–7: Plastics,
20–22: Paper and cardboard,
80–98: Composite materials.
zEC Declaration of
Conformity
We, the manufacturer,
C. M. C. GmbH
Responsible for documentation:
Dr. Christian Weyler
Katharina-Loth-Str. 15
66386 St. Ingbert
GERMANY
hereby take sole responsibility for
declaring that the product
Mobile charging station
IAN: 403811_2201
Art. no.: 2493
Year of
manufacture: 2022/42 Model: USML 3.7 A1 meets the basic safety requirements
as specified in the European
Directives
Electromagnetic
Compatibility:(2014/30/EU)
Low Voltage Directive:
(2014/35/EU)
RoHS Directive:
(2011/65/EU)+(2015/863/EU)
Ecodesign Directive:
(2009/125/EU)
and the amendments to these
Directives.
The object of the declaration
described above meets the require-
ments of Directive 2011/65/EU of
the European Parliament and of the
Council of 8 June 2011 on the
restriction of the use of certain haz-

19
GB/IE/NI/CY/MT
ardous substances in electrical and
electronic equipment.
This conformity assessment is
based on the following harmonised
standards:
IEC 62752:2016 + A1:2018 EN IEC 61000-6-1:2019
EN IEC 61000-6-3:2021
EN IEC 61851-21-2:2021
St. Ingbert, 1st. August 2022
pp Dr. Christian Weyler
– Quality Assurance –
zWarranty and service
information
Warranty from Creative
Marketing & Consulting
GmbH
Dear Customer,
The warranty for this equipment is
3 years from the date of purchase.
In the event of product defects, you
have legal rights against the retailer
of this product. Your statutory rights
are not affected in any way by our
warranty conditions, which are
described below.
zWarranty conditions
The warranty period begins on the
date of purchase. Please retain the
original sales receipt. This docu-
ment is required as your proof of
purchase.
Should this product show any defect
in materials or manufacture within
3 years from the date of purchase,
we will repair or replace it – at
our discretion – free of charge.
This warranty service requires that
you retain proof of purchase (sales
receipt) for the defective device for
the three year period and that you
briefly explain in writing what the
fault entails and when it occurred.
If the defect is covered by our
warranty, we will repair and return
your product or send you a replace-
ment. The original warranty period
is not extended when a device is
repair or replaced.
zWarranty period and
statutory claims for
defects
The warranty period is not extended
by the guarantee. This also applies
to replaced and repaired parts. Any
damages or defects detected at the
time of purchase must be reported
immediately after unpacking. Any
incidental repairs after the warranty
period are subject to a fee.

20 GB/IE/NI/CY/MT
zExtent of warranty
This device has been manufactured
according to strict quality guidelines
and carefully inspected before
delivery.
The warranty applies to material
and manufacturing defects only.
This warranty does not extend to
product parts, which are subject to
normal wear and tear and can thus
be regarded as consumable parts,
or for damages to fragile parts, e.g.
switches, rechargeable batteries or
parts made from glass.
This warranty is voided if the
product becomes damaged or is
improperly used or maintained. For
proper use of the product, all of the
instructions given in the operating
instructions must be followed pre-
cisely. If the operating instructions
advise you or warn you against
certain uses or actions, these must
be avoided in all circumstances.
The product is for consumer use only
and is not intended for commercial or
trade use. The warranty becomes void
in the event of misuse and improper
use, use of force, and any work on
the device that has not been carried
out by our authorised service branch.
zProcessing of warranty
claims
To ensure prompt processing of your
claim, please follow the instructions
given below.
Please retain proof of purchase and
the article number (e.g. IAN) for all
inquiries.
The product number can be found
on the type plate, an engraving,
the cover page of your instructions
(bottom left), or the sticker on the
back or underside of the device.
In the event of malfunctions or other
defects, please first contact our
service department below by phone
or email. If your product is found
to be defective, you can then send
your product with proof of purchase
(till receipt) and a statement
describing what the fault involves
and when it occurred free of charge
to the service address given.
Note:
If you visit www.lidl-service.
com, you can download this manual
and many other manuals, product
videos and software.
With this QR code you can gain
immediate access to the Lidl Ser-
vice page (www.lidl-service.com)
and you can open your operating
instructions by entering the article
number (IAN) 403811.