Ultrative UTT-850 User manual

1 -
User Manual
IP Phone
UTT-850
Version 1.0

2 -
1. Introduction
Welcome to select our IP Phone and thanks for your trust and support to our company. We
sincerely hope you can enjoy the convenience and capabilities brought forward by our products.
IP Phone provides all the features and functionalities of conventional phone and more. Our IP
phone guarantees rich function and superb voice quality at mass-affordable price, which is fully
compatible with SIP industry standard and able to interoperate with most SIP compliant devices
and software on the market.
This manual provides the information on basic operations and functions for IP Phone, which
would assist users the fast access to learn basic functions and be familiar with operating these
functions.
△
!CAUTION
Although the adapter of IP Phone is compliant with UL standard, please do not attempt to
use other difference power adapter or cut off power supply during configuration or
updating phone. Using other power adapter may damage IP phone and will void the
manufacturer warranty.
1.1 Components
Unpacking the package of IP Phone and please clearly check the box contents according to below
packing list .If you find any contents missing or damaged, contact the place of purchase.
Components Packing List
Components Quantity
Main Unit 1 Unit
Handset 1 PCS
Cord 1 PCS
Adapter 1 PCS
RJ45 network cable 1 PCS
User Manual 1 Volume

3 -
IP Phone are designed to look alike conventional phones, the following photo shows a broad
overview of the IP Phone.
1.1 Flexible Function
Key button introduction
1．Callers 2.Redial 3. Hand free 4.Memory key
5.Volume+ 6．Volume- 7.Transfer 8.Mute
9.Hold 10.Phonenumber 11．Network 12.Esc
13. Earphone 14. Directory 15．Soft1 16.Soft2
17.Soft3 18.Left 19．Up 20.Right

4 -
21.Down 22.Menu
1.2 Key Function
There are 38 keys on the phone. Definitions of each is stated as below
Key Button Mode Definitions
0 -9 In the dial-up mode Decimal digit number 0-9
In the keypad configure mode Rapid first press display the digit number 0-9,rapid second
press display the English character or others
* In the dial-up mode As one part of phone number when call out
In the call hold mode Ready to call a third party’s number to make three-way (or
conference) calling
In the keypad configure mode Equal to the dots notation when input IP address
Ex. 192.168.10.202
# In the dial-up mode As one part of phone number if “#” is the first dialed number,
otherwise as the ending symbol to end up dialing
MENU In the IDLE mode Enter menu mode and display the tree menu system
Callers In the IDLE mode Check the Income/Outgoing/Missed calls record
Three flexible
Function Keys
In the IDLE mode or In the keypad
configure mode
Select the relevant function on the LCD , group function
keys ,relize up/down/enter /edit//quit/save/record/next
HOLD In the keypad configure mode Temporarily hold the active call
Transfer In the keypad configure mode Transfer the active call to another party
REDIAL In the dial-up mode Redial the number last dialed
In the IDLE mode Enter hands-free mode
UP/Down In the keypad configure mode Go back to previous menu item/ Go down to lower menu items
In the idle mode Continuous thrice press display assigned WAN Port IP,
gateway’s IP and the phone number registered on public server
Left/Right In the keypad configure mode Choose the item on the menu
In the idle mode Show SIP Phonenumber
Memory Key 1~5 In the IDLE mode Show the corresponding recorded phone NO.
Directory In the IDLE mode Access to phone book.
Hand free In the IDLE mode Enable Hand free function
Volume adjustment In the IDLE mode Adjust the dialing ring volume
In the hand free mode Adjust the hand free volume
In the dial up mode Adjust the handset volume
Network In the dial-up mode Show wan port ip gateway ip
Mute In the dial-up mode Mute an active call

5 -
Key Button Mode Definitions
Earphone Use earphone to receive and make a call
2. Product Installation
2.1 Installation
a) Insert handset cord into the handset jack and the other end to the left jack of IP Phone
b) Insert the power adapter’s plug into the phone Power jack and the 2-prong plug end of which
into grounded power outlet
c) Connect one end of the network cable to the WAN port, which is indicated as , the other
end to the internet.
d) If need to set up small LAN network, find the network cable in the box and connect it
between LAN port, which is indicated as and your PC (PC is not required to set up for
making a call)
2.2 Typical Product network connecting Diagrams
Diagrams 1
Diagrams 2
IP PHONE

6 -
3. IP Phone Configuration
Hereinabove the manual has defined the keypad function. It is easy to config IP phone thru the
keypads. UTT168-850 can be configured without PC , With keypad configuration It can set Network
parameter , SIP, Ring tone,and so on. There are ten function item in Menu. Include Memory
Key , Screen Setting, Volume Control, Greeting Message , Language Setting ,
Sip Setting, Network Setting, Ringer Type, Voice Memo, Reboot System.
Get the assigned WAN Port IP, gateway’s IP and the phone number registered on public
server:Press the Down Key. It will display the WAN Port IP, gateway’s IP
Speed Dial Memory Key setting
3.1 Memory key
It is the first item in the menu config. There are five memory key
to insall common use phonenumber for speed dial
3.1.1 Set Speed Dial Memory Key
¾press Menu Key in Idle mode:
¾LCD displays 01 Memory Key
¾Select Choose a Memory Key
¾Choose one from Memory 1 ~ Memory 5
¾Enter the phone number you want to speed dial
¾Select Save
¾Finished.
3.1.2 Dial Speed Dial Memory Key
¾Press Memory 1~5 key in idle mode
¾Press Hand free or pick up the handset

7 -
3.2 Screen display setting
Screen display setting is the second item in menu,press Soft key2 to access set.include
contrast adjustment by left and right button. Press softkey 1 to adjust the brightness by left and
right button,there are three option for selecting , close ,low ,high.
3.2.1 Login
¾Pressing Menu Key in Idle mode
¾Press the Down Key .
¾The LCD displays 02 Screen Setting
3.2.1 Letter contrast setting
¾Select Enter. The LCD displays 01 Contrast
¾Adjust the letter contrast by pressing Left Key or Right Key
¾Select Save
¾Finished.
3.1.2 Brightness setting
¾Select Enter
¾Press the Down Key . The LCD displays 02Brightness
¾Select ■Off, ■Low, ■High of the brightness by pressing Left Key or Right
Key
¾Select Save
¾Finished.
3.3 Volume Setting
This item can adjust ring tone and microphone input and out put volume
¾Pressing Menu Key in Idle mode
¾Press the Down Key twice. The LCD displays 03 Volume Setting
3.3.1 Ringer Volume Setting
¾Select Enter. The LCD displays 01 Ringer Volume

8 -
¾Adjust the ringer volume by pressing Left Key or Right Key
¾Select Save
¾Finished.
3.3.2 Call Part Volume
¾Select Enter. The LCD displays 01 Call Party Volume
¾Adjust the call party volume by pressing Left Key or Right Key
¾Select Save
¾Finished.
¾
3.4 Greeting Message Setting
Setting message display on the LCD when phone in on idle state. It support maximum
ten letters . Default display < voip phone >.
¾Pressing Menu Key in Idle mode
¾Press the Down Key three times. The LCD displays 04 Greeting Message
¾Select Edit
¾Enter the greeting message with the Number Key and Letter Key ( The LCD
displays number while pressing Number Key 0 ~ 9 once and displays the
Lowcase letter / Capital letter while pressing twice. The * stands for full stop or
comma. # stands for space.
¾Select Save
¾Finished
3.3.4 Language Setting
UTT-850 support Chinese and english . User can select language between theses two
language.
¾Pressing Menu Key in Idle mode
¾Press the Down Key four times. The LCD displays 05 Language
3.4. SIPSetting
¾Pressing Menu Key in Idle mode
¾Press the Down Key five times. The LCD displays 06 SIP Setting
3.4.1 SIP server setting
UTT-850 support two SIP service provider (SP) synchronously. We name SIP1 and SIP2. User
can set his SIP accout by keypad . If the register port is not 5060 .You must set it in WEB.
¾Select Enter. The LCD display 01 SIP 1
zSIP 1 setting
¾Select Enter. The LCD display 01 SIP 1 Server
¾Select Edit. Enter the IP domain/ IP address.
¾Select Save
¾Finished.

9 -
zSIP Number Setting
¾Return to 01 SIP 1
¾Press the Down Key once. The LCD displays 02 SIP 1 Number
¾Select Edit. Enter the SIP 1 Number
¾Select Save
¾Finished.
zSIP Account Setting
¾Return to 01 SIP 1
¾Press the Down Key twice. The LCD displays 03 SIP 1 Account
¾Select Edit. Enter the SIP 1 Account
¾Select Save
¾Finished.
zSIP Password Setting
¾Return to 01 SIP 1
¾Press the Down Key for three times. The LCD displays 04 SIP 1 Password
¾Select Edit with Flexible Function Key. Enter the SIP 1 Password
¾Select Save
¾Finished.
zRegister Setting
¾Return to 01 SIP
¾Press the Down Key for four times. The LCD displays 04 SIP 1 Register
¾Press Left Key or Right Key to select □ON / □OFF
¾Select Save
¾Finished.
SIP 1 Account Setting finished.
SIP 2 Account Setting is the same as SIP 1 Account Setting
3.4.2 Network Setting
Network setting involve WAN port network mode , static DHCP ,PPPOE. If select
static . user can modify the static IP .DNS ,gateway IP. If select DHCP , wan port will
get IP from DHCP server automatically. If select PPPOE , UTT-850 can connect with
ADSL modem .
¾Pressing Menu Key in Idle mode
¾Press the Down Key for six times. The LCD displays 07 Network Setting
zNet Mode Setting
¾Select Enter. The LCD displays 01 Net Mode
¾Press Left Key or Right Key to select □Static / □DHCP /□PPPoE
¾Select Save
¾Finished.

10 -
zStatic Setting
¾Return to 07 Network Setting.
¾Select Enter and go into WAN port network setting.
¾Press the Down Key and go into the Static Setting.
The LCD displays 02 Static Setting
¾Select Enter the LCD displays 01 Static IP
¾Select Edit . Enter the Static IP.
¾Select Save
¾Finished.
Return to the Static IP Setting mode. The LCD displays 02 Static Setting
¾Select Enter and press
¾Select Enter . Press the Down Key twice.The LCD displays 04 Static DNS
¾Select Edit . Enter the gateway IP
¾Select Save
¾Finished.
zPPPoE Setting
¾Return to 07 Network Setting.
¾Select Enter and go into WAN port network setting.
¾Press the Down Key twice. The LCD displays 03 PPPoE Setting
¾Select Enter. The LCD displays 01 Account
¾Select Edit . Enter the PPPoE account. Please refer to 3.4
¾Select Save
¾Finished.
Return to 03 PPPoE Setting
¾Select Enter. Press the Down Key .The LCD displays 02 Password
¾Select Edit . Enter the PPPoE password.
¾Select Save
¾Finished.
3.6 Ring Type Setting
We design 12 different incoming ring tone for user selecting. Include 4 MP3 ring. User
use LEFT and RIGHT button to choose.
¾Press Menu Key in Idle mode
¾Press the Up Key . The LCD displays 08 Ring Type.
¾Press Left Key or Right Key to select the ring type.(There are 8 default
ring types).
¾Select Save
¾Finished.