Ultravation UVP-6000 User manual

Portable Air Purier
with Germicidal UVC and Advanced TiO2 Impregnated Carbon Odor Reduction Technology
OWNER’S GUIDE
Read and follow all safety instructions.
Save this manual for reference. Space is provided for recording
annual UV lamp changes.
made in
USA
www.ultravation.com
Model
UVP-6000
Desktop / Wall mount

Never look directly at the ultraviolet lamps while in operation.
Do not disassemble and operate.
Package contents:
1 Desktop / Wall mount air purier
1 Wall mount kit
1 Power cord
Maintenance:
Maintenance of the purier includes replacement of the UVC lamp every 9,000 hours –
approximately 1 year. This is important as UV lamps undergo a photochemical process
during operation. This slowly reduces the amount of UV light generated to disinfect against
airborne pathogens. When changing lamps unit should be checked for accumulated dust
on reectors.
Important: We recommend lamp replacement with genuine Ultravation replacement
lamps.
When installing a new lamp, ensure that the lamp glass is free of any ngerprints or debris, as
this may alter the path of the UV energy. Use rubbing alcohol and a dry cloth to remove any
surface contaminants.
Replacement no-ozone UV lamp part number: LP-PP-0114
Washable lter replacement part number: 91-042
Safety Precautions:
This unit is hardwire-ready with removable power cord and hardwire knockout provided. It is
recommended that this unit be installed and maintained by a trained technician.
WARNING: UV Hazard. Always protect eyes from ultraviolet light.
NEVER look at UV lamps in operation. Turn off power before re-lamping
or servicing.
WARNING: UV light can cause severe eye damage or temporary
blindness.
Note: In the event of accidental breakage or replacement of the ultraviolet
lamp, ensure that the lamp is disposed of in accordance with local
environmental laws regarding uorescent lamps containing mercury.
All specications, dimensional data, and appearance are subject to change without notice.
2
This symbol indicates
potential hazards with
this product that can
result in property
damage and/or
serious injury or death
Portable Air Purier
with Germicidal UVC and Advanced TiO2 Impregnated Carbon Odor Reduction Technology

Principle of operation:
The UVP-6000 Portable Air Purifier is designed to control odors and deactivate airborne bacteria, viruses and
allergens using germicidal UV (ultraviolet) light and photo-catalytic oxidation (PCO) with activated carbon
panels infused with a patented titanium dioxide (TiO2) with silver and zinc formulation. This purifier produces
no ozone.
1: Activated carbon modules adsorb the volatile organic compound molecules (VOCs) that make up
the majority of common odors, as well as smoke particles and other airborne microbes including bacteria
and viruses.
2: UV-powered photocatalytic (PCO) process breaks down the trapped contamination into simpler forms—
primarily trace amounts of carbon dioxide and water.
3: As the air passes through the germicidal UVC light viruses and bacteria are killed.
4: Positive and negative ions are released into the room that freshen the air by breaking down odors, and
removing microparticulates (statically charging them to attract and form groups that fall to the oor), and
augmenting air disinfection.
The UVP-6000 Portable Air Purifier is designed for room applications or areas up to 500 sq ft.
Maintenance:
Replace UV lamp annually as the invisible UV output gradually degrades over time. The lter media in your air
cleaner must be cleaned periodically. The frequency of lter cleaning is best determined by visual examination.
However, an annual cleaning of the lter is strongly recommended.
Lamp replacement:
1: Unplug or turn off power to the purier and remove cover by removing four Phillips-head screws from sides of
the unit.
2: Remove existing lamp by removing it from the clips. Unplug lamp from power supply housing by pulling
connector straight off.
3: Install new lamp by plugging it into the lamp connector and clipping it back into the clips.
4: Replace cover and secure with screws.
Steps for cleaning lter on bottom of unit:
1: If wall mounted detach from wall.
2: Unplug or turn off power to the purier and remove cover by removing two Phillips-head screws from bottom
panel of unit.
3: Open the lter guard by pulling on a corner.
4: Remove lter.
5: Rinse lter with normal tap water.
6: Let lter air dry for a minimum of 15 minutes before replacing into the unit.
7: Re-install lter and snap on lter guard.
3
Portable Air Purier
with Germicidal UVC and Advanced TiO2 Impregnated Carbon Odor Reduction Technology

TheUVP-6000 Portable Air Purifier is designed for desktop portability or in wall mount settings such as:
4
Wall Mount installation:
1: Attach mounting bracket securely to
mounting surface (use appropriate
hardware to support 10 lbs., not
included). Photo 1
2: Disconnect power and slide purier cover
straight upward, sliding detents out of
their locked positions. Photo 2
3: With cover off attach purier to mounting
bracket, aligning mounting holes and
using provide screws. Purier may be
installed with power switch oriented at
the top or bottom. Photo 3
4: Slide cover onto unit, making sure
detents lock into place. Connect power
and operate. Photo 4
Hardwire connection:
This product can be hardwired into an
electrical circuit or powered via the pre-
installed 5 ft. power cord. For a hardwired
connection, it is recommended that a
licensed electrician perform this task
following all national and local electrical
codes.
1: With unit unplugged, slide purier cover
straight upward, sliding detents out of
their locked positions. Photo 2
2: Pull approximately 4 inches of power
cord into the unit and cut
3: Remove leftover power cord and
remove the provided 1/2' or 3/4" knock-
out as needed for planned connection.
4: Slide cover onto unit, making sure
detents lock into place. Connect power
and operate. Photo 4
Ribbed wire
• Restaurants
• Gyms
• Locker rooms
• Restrooms
• Kitchens
• Laundry
• Medical waiting rooms
• Hotel / Motel rooms
• Veterinarian centers
• Other public
spaces
Portable Air Purier
with Germicidal UVC and Advanced TiO2 Impregnated Carbon Odor Reduction Technology
Photo 1: Attach bracket to wall
Photo 3: Mounting bracket
holes (hardware provided)
Photo 2: Slide cover upward
Photo 4: Cover re-attached
Wiring diagram
Cover lock detents
Photo 2: Slide cover upward
Cover lock detents

Warranty:
Ultravation warrants this product against any defects in material or workmanship for a period of 5 years after date of
purchase. This warranty does not include damage to the unit from accident, misuse or improper installation. If this product
should become defective during the warranty period, Ultravation will elect to repair or replace the product free of
charge. Ultravation will return repaired or replaced warranted products pre-paid, provided that the product was
delivered pre-paid. This warranty gives you specific legal rights, and you may also have other rights, which vary from state
to state. All returns must be accompanied by a return authorization number, which may be obtained by contacting
Ultravation.
Lamp Replacement Record
5

www.ultravation.com