UNINEX KOOLZONE SAC-1800 User manual

UNINEX INTERNATIONAL
5780 SMITHWAY STREET COMMERCE, CA 90040
T. 800-864-3288 / 323-890-9246 / F. 323-890-9249
KOOLZONE
MOBILE SPOT COOLER
THANK YOU FOR PURCHASING THE KOOLZONE MOBILE SPOT COOLER.
PLEASE READ THE INSTRUCTIONS BEFORE USING.
AND PLEASE KEEP THESE INSTRUCTIONS FOR REFERENCE.
QUICK GUIDE FOR SAC-1800

MANUAL - COLD AIR DUCT FITTING
PARTS OF THE MACHINE
UNINEX.COM 800.864.3288 CONTACT US FOR PURCHASE OR RENTAL (Click Here)
Lock Out
Releasing-Locking
Ring
Lock In
Concave Part
Bending Duct
Convex Part
Cooling Duct
Recess
Convex Part
INSTALLATION
1. Installation of the curved duct: Please point the convex part of the bending duct to the concave part of the bending base
and insert it, the rotate the releasing-locking ring to x the bending duct.
2. Installation of the cooling duct: Slide the fringe of cooling duct to the slot of curve duct, then turn the cooling duct
clockwise to lock. Please make sure the joint is connected well before use.
Bending Duct
Support
Particle Filter
Power Cord
Cooling Duct
Curved Duct
Operation Switch
Handle
Water Tank Covering Panel
Mesh Grill Cover For Fan / Heating Outlet
Water Tank (3L)Grounding
Screw

TURN THE SPOT COOLER ON /
DIRECTION ADJUSTMENT
DRAIN TANK
IMPORTANT - KEEP DISTANCE
Heating Outlet
Direction above 40cm
Air Outlet
Direction above 20cm
Cooling Outlet
Direction above 30cm
Water Tank
Mortise Joint Point
Mortise Joint
Water Tank
Covering Panel
Water Variance
Observing Hole
Handle Space Hole
UNINEX.COM 800.864.3288 CONTACT US FOR PURCHASE OR RENTAL (Click Here)
360º

UNINEX.COM 800.864.3288 CONTACT US FOR PURCHASE OR RENTAL (Click Here)
KOOLZONE MANUFACTURER’S
RECOMMENDATIONS
1. USE A DEDICATED OUTLET. DO NOT SHARE AN OUTLET WITH OTHER DEVICES.
SHARING AN OUTLET MAY CAUSE A POWER CUT.
2. USING AN EXTENSION CORD IS NOT RECOMMENDED.
IF AN EXTENSION CORD IS NEEDED, USE 12 AWG OR THICKER GAUGE.
3. DO NOT BLOCK THE HEAT EXHAUST OUTLET.
(DO NOT PLACE SAC1800 TOO CLOSE TO THE WALL.)
IT MAY BLOCK THE HEAT OUTLET AND CAUSE THE SPOT COOLER TO
STOP WORKING PROPERLY.
4. FOR OPTIMUM PERFORMANCE, USE ONLY UP TO A MAXIMUM OF
12 FT OF HEAT/COOL EXTENSION DUCT.
12
AWG
MAX
12FT

PLEASE NOTE
UNINEX.COM 800.864.3288 CONTACT US FOR PURCHASE OR RENTAL (Click Here)
OPTIMUM OPERATING TEMPERATURE RANGE FOR
KOOLZONE MOBILE SPOT A/C COOLER
IS FROM 64 - 104° FAHRENHEIT.
PROPER USAGE OF THIS UNIT, AT THE COOLING DUCT,
WILL REDUCE THE AMBIENT TEMPERATURE
BETWEEN 10 - 15° FAHRENHEIT.

MAKE LIFE SIMPLE AND MORE CONVENIENT
WITH UNINEX
EXCLUSIVELY DISTRIBUTED BY:
UNINEX INTERNATIONAL
5780 SMITHWAY STREET COMMERCE, CA 90040
T. 800-864-3288 / 323-890-9246 / F. 323-890-9249
MANUFACTURE:
NAKATOMI CO.,LTD.
6445-2, TAKAI, TAKAYAMA, KAMITAKAI, NAGANO, JAPAN
SCAN ME
CONTACT US FOR PURCHASE OR RENTAL