UNINEX KOOLZONE SAC-25FC User manual

USER MANUAL
SAC-25FC
KOOLZONE
MOBILE SPOT COOLER
FOR MORE INFO

KOOLZONE
2
THANK YOU FOR PURCHASING THE KOOLZONE MOBILE SPOT COOLER.
PLEASE READ THE INSTRUCTIONS BEFORE USING.
KEEP THESE INSTRUCTIONS FOR REFERENCE.

KOOLZONE
3
TABLE OF CONTENTS
1. SAFETY PRECAUTIONS ································ PAGE 4,5
2. SPECIFICATIONS ············································ PAGE 6
3. ACCESSORIES ················································ PAGE 6
4. PARTS OF THE MACHINE ································ PAGE 7
5. INSTALLATION ··············································· PAGE 7
6. OPERATING INSTRUCTION ····························· PAGE 9
7. MAINTENANCE AND INSPECTION ··············· PAGE 10
8. TROUBLESHOOTING ···································· PAGE 11

KOOLZONE
4
1. SAFETY PRECAUTIONS
Please read “Safety Precautions” carefully before operating the unit to reduce the risk of injury or
damage.
Please read carefully. The following should be read and understood.
STOP
STOP
FORBIDDEN
AS DIRECTED
NOTIFICATIONS / CAUTION
FOR YOUR SAFETY, PLEASE FOLLOW THESE INSTRUCTIONS.
It may cause personal injury, re, or other property damage
if you neglect this mark and operate in the wrong way.
Please do not use the unit where ammable materials are used or stored (such as thinner,
gasoline, kerosene, LPG, aluminum, magnesium, and plumbum). They could cause possible re or
explosion.
Only a professional repair service should disassemble the unit in order to avoid warranty
voidance or safety issues such as re, electric shock, and injury. If you need repairs, please
contact the manufacture or qualied repair service.
This mark stands for under any circumstances this unit should
not be used.
This mark stands for only use as directed.
The power supply use only 115V single phase, otherwise it will cause the unit not to function
properly.
This mark stands for notication of use or to be aware of
possible hazardous or unsafe situations.
Please do not operate the unit in the rain or wet areas.

KOOLZONE
5
Keep unit away from excessive heat or re. It may cause damage to the unit.
Do not change or modify the unit. It could cause damage to the unit or property and will void
warranty.
Use only grounded outlet.
Turn off the unit to move location or lock casters.
Hold plug when pulling out of outlet. Otherwise, the plug may be damaged or sparking could
occur.
The unit operates in the temperature range from 64°F to 104°F, otherwise it may cause the unit to
slow the air ow or shutdown.
To prevent an accident or damage, the unit can not be used in the following locations:
• Not grounded.
• Unlevel ground.
• Stairs, emergency exit or entrance.
• Area of strong wind, heavy dust or metal powder.
Unplug unit for repair or installation.
Do not bend, pull, bind, clip, or change the power cord. It may cause accidents such as re or
electrical shock.
Do not use unit on a boat.
Unplug unit if storing or non-use for a period time.
If the unit is stopping, has excessive noise, or abnormal odor, please stop use immediately.
STOP

KOOLZONE
6
2. SPECIFICATIONS
3. ACCESSORIES
POWER / FREQUENCY
LOAD CURRENT
CONSUMPTION POWER
COOLING CAPACITY
COMPRESSOR
REFRIGERANT
Drain Hose Cooling Duct
REFRIGERANT (RATED CHARGE)
FAN PROTECTOR
CONDENSATE WATER HANDLING METHOD
SIZE
WEIGHT
OPERATING TEMPERATURE LIMIT
Single phase 115 V / 60 Hz
Fan
1.7 A
195 W
Aircondition
8.58 A
937 W
9,210 BT U
Fully Closed Type Rotary
R410 A
520 g
Inner Overheatprotector
Drain Pipe
17.7” × 20.6” × 15.9”
7 7. 2 L B
(77℉ - 113℉)
• Refrigeration capability and electric features are tested at 94℉room temperature and 60% humidity.

KOOLZONE
7
Front Cold Air VentSocket
Evaporator Filter Screen
Heat Vent
Heat Vent Cover Plate
Heat Vent
Cooling Vent Cover Plate
Cooling Duct
Cooling Duct
Caster Wheel
Cold Air Vent
Heat Vent Cover Plate
Heat Vent
Electric Box
Cover Plate
Side Cold Air
Vent Cover Plate
Switch Control Box
Power Cord
Evaporator Filter Screen
4. PARTS OF THE MACHINE
5. INSTALLATION
• INSTALLING THE COOLING DUCT
There are two cold air outlets. Both outlets can be used together (one cooling duct included).
Additional ducts can be purchased seperately. The cold air vent socket is xed to the cold air vent on the
air conditioner with four M5x12 screws (included). Select the direction needed and cover the other cold
air vents with a cold air vent cover plate. There are three heat outlets provided by the air conditioner.
Depending on the situation, the heat vent cover can be used on one or none of heat vents.
Cold Air Flow Front View Cold Air Flow Side View

KOOLZONE
8
Switch Control Box Hook
Water Outlet
Drain Hose
•INSTALLING THE DRAIN HOSE
Connect the drain hose as illustrated below. Condensated water can be drained directly from
the unit using the drain hose.
•INSTALLING THE THE SWITCH CONTROL BOX
The switch control box hook is attached to the side of the unit (as illustrated below). Connect the
switch control box to the hook.
• POWER SUPPLY CONNECTION
Please use a dedicated power outlet.
Please use a grounded circuit breaker with a 15A capacity.

• HOW TO OPERATE AND SELECT FUNCTIONS
Set the switch to fan mode and the fan will start. The unit will emit ambient air.
At fan mode setting the compressor will not work.
Set the switch on cooling mode, the compressor will start and cold air will ow from the AC unit.
Set the switch to the stop, AC unit will turn off.
6. OPERATING INSTRUCTION
SWITCH CONTROL BOX OVERVIEW
STOP
Stop Stop Stop
Fan Fan Fan
Cooling Cooling Cooling
FAN COOLING
• Operating temperature is between 77°F to 113°F.
• If you use the unit out of the temperature range, it may not work properly.
• Do not overload the electrical system by using too many devices off one outlet.
NOTIFICATION
KOOLZONE
9
When the overload protection is working, the air ow from the unit will be at the ambient temperature of
the room, but will not cool the air.
If overload protection works frequently, nd out, and x the problem before using the unit.
•COMPRESSOR OVERLOAD / OVERHEAT PROTECTION
If the compressor overheats or overloads due to high or low voltage or high ambient temperature,
the built in safety protection for the compressor will start working and turn off the unit.
CAUTION

KOOLZONE
10
Top Front
Direction
above 16”
Direction
above 16”
Direction
above 16”
Direction
above 16”
Evaporator Filter Screen Condenser Filter Screen
7. MAINTENANCE AND INSPECTION
• When cleaning lter with heavy use, consider vacumming lter before rinsing. Rinse with water and dry
thoroughly before reuse.
• When cleaning the surface of the unit, do not use abrasive materials or chemicals which could damage
the unit surface.
Please clean the lter regularly.
NOTIFICATION
In order to prevent accidents, the unit should be placed on level ground. Unlevel ground, stairs,
emergency exits should not be used. Minimum distance needed is 12” from any wall.
While the unit operates, please do not place obstructions in front of the lter, cooling, or heating
exhaust duct.
•KEEP DISTANCE
Make sure the unit has minimum distance from any wall, ceiling, or object as illustrated below.

KOOLZONE
11
8. TROUBLESHOOTING
PROBLEM CAUSE SOLUTION
NOT RUNNING
NO REFRIGERATION
WATER LEAKS OUT
• The power plug is loose or
disconnected.
• The breaker switch has turned off.
• The condenser surface is dirty
and blocked.
• The heat exhaust fan not working.
• The external environment
temperature is too high.
• The compressor is not working.
• The refrigeration system pipeline
is blocked.
• Possible power overload.
• The drain pipe is blocked.
• The lter is dirty.
• The water tank is full of water.
• Clean out the drain pipe.
• Clean the lter.
• Remove drain cap and empty the
water.
• Clean the condensor surface and
vents.
• Check fan.
• Move to more a suitable place
to use.
• Check the capacitor to the
compressor.
• Check pipeline system and clean.
• Check for proper voltage.
• Insert the plug into the wall outlet.
• Check breaker on main panel and reset.
• Ask the technical service department
for assistance.
• The warranty period of this machine is one year. Our company has a technical department to
provide sevice to our customers.
• If the customer disassembles or modies the unit in any way, the unit is not covered by the warranty.
• If the unit is out of warranty, the customer is responsible for service and additional costs if needed.

KOOLZONE
12
KOOLZONE MANUFACTURER’S
RECOMMENDATIONS
12
AWG
MAX
12FT
1. USE A DEDICATED OUTLET. DO NOT SHARE AN OUTLET WITH OTHER DEVICES.
SHARING AN OUTLET MAY CAUSE A POWER OUTAGE.
2. IF USING AN EXTENSION CORD, A 12 AWG IS RECOMMENDED.
3. DO NOT BLOCK THE HEAT EXHAUST DUCT.
BLOCKING THE HEAT EXHAUST COULD CAUSE THE UNIT
TO OVERHEAT AND STOP WORKING PROPERLY.
4. FOR OPTIMUM PERFORMANCE, USE ONLY UP TO A MAXIMUM OF
12 FT OF HEAT/COOL EXTENSION DUCT.

KOOLZONE
13
PLEASE NOTE
OPTIMUM OPERATING TEMPERATURE RANGE FOR
KOOLZONE MOBILE SPOT A/C COOLER
IS FROM 77° - 113° FAHRENHEIT.
WHEN USING THIS UNIT ON COOLING MODE,
THE AMBIENT TEMPERATURE WILL BE REDUCED
BETWEEN 10° - 15° FAHRENHEIT.

MAKE LIFE SIMPLE AND MORE CONVENIENT
WITH UNINEX
EXCLUSIVELY DISTRIBUTED BY:
UNINEX INTERNATIONAL
5780 SMITHWAY STREET COMMERCE, CA 90040
T. 800-864-3288 / 323-890-9246 / F. 323-890-9249
MANUFACTURE:
NAKATOMI CO.,LTD.
6445-2, TAKAI, TAKAYAMA, KAMITAKAI, NAGANO, JAPAN
SCAN ME
CONTACT US FOR PURCHASE OR RENTAL