UNINEX KOOLZONE SAC-4500 Instruction manual

UNINEX INTERNATIONAL
5780 SMITHWAY STREET COMMERCE, CA 90040
T. 800-864-3288 / 323-890-9246 / F. 323-890-9249
KOOLZONE
MOBILE SPOT COOLER
THANK YOU FOR PURCHASING THE KOOLZONE MOBILE SPOT COOLER.
PLEASE READ THE INSTRUCTIONS BEFORE USING.
AND PLEASE KEEP THESE INSTRUCTIONS FOR REFERENCE.
QUICK USER GUIDE FOR SAC-4500

MANUAL - COLD AIR DUCT / HEAT-REMOVAL DUCT FITTING
PARTS OF THE MACHINE
UNINEX.COM 800.864.3288 CONTACT US FOR PURCHASE OR RENTAL (Click Here)
INSTALLATION
1. The elbow inserts the entrance alignment the black line of the cold wind export and press in, revolving 180°.
2. Fit the recess of the elbow into the convex of the duct, then turn it anti clockwise until it stops.
*Note - Please do not add other accessories, or t extended duct on the cold air duct to avoid damage.
Do not cover to the air outlet of cold air duct.
3. How to install the heat-removal duct : The heat-removal duct socket uses 4 ST4x12 bolts to x on the heat-removal mouth.
When inserting the heat-removal duct, please note the heat-removal mouth recess.
Heat-Removal Duct
Heat-Removal Duct Socket
Cold Air Duct
Duct Elbow
Duct Cap
Operation Panel
Revolving Switch Swing Switch
Drain Tank (9L) Caster Wheel
Particle Filter
High
Swing Switch
ON
OFF
Low
Off
Power
Insertion
Bolt Hole
Heat-Removal Mouth Heat-Removal
Duct Socket
Cooling Duct
Recess
Convex Part
Duct Elbow
Cold Wind Export
Black Line
Insert into
the Entrance
*After the insertion,
rotates 180º

TURN THE SPOT COOLER ON/
DIRECTION ADJUSTMENT
DRAIN TANK / DIRECT DRAIN
IMPORTANT - KEEP DISTANCE
Heating Outlet
Direction above 80cm
Air Outlet
Direction above 30cm
Cooling Outlet
Direction above 30cm
UNINEX.COM 800.864.3288 CONTACT US FOR PURCHASE OR RENTAL (Click Here)
200º
High
Swing Switch
ON
OFF
Low
Off
Power
Extraction
Drain Tank
Red Water Line
Drain Pan
Extraction
Drain Spout
16
⏀

UNINEX.COM 800.864.3288 CONTACT US FOR PURCHASE OR RENTAL (Click Here)
KOOLZONE MANUFACTURER’S
RECOMMENDATIONS
1. USE A DEDICATED OUTLET. DO NOT SHARE AN OUTLET WITH OTHER DEVICES.
SHARING AN OUTLET MAY CAUSE A POWER CUT.
2. USING AN EXTENSION CORD IS NOT RECOMMENDED.
IF AN EXTENSION CORD IS NEEDED, USE 12 AWG OR THICKER GAUGE.
3. DO NOT BLOCK THE HEAT EXHAUST OUTLET.
(DO NOT PLACE SAC1800 TOO CLOSE TO THE WALL.)
IT MAY BLOCK THE HEAT OUTLET AND CAUSE THE SPOT COOLER TO
STOP WORKING PROPERLY.
4. FOR OPTIMUM PERFORMANCE, USE ONLY UP TO A MAXIMUM OF
12 FT OF HEAT/COOL EXTENSION DUCT.
12
AWG
MAX
12FT

PLEASE NOTE
UNINEX.COM 800.864.3288 CONTACT US FOR PURCHASE OR RENTAL (Click Here)
OPTIMUM OPERATING TEMPERATURE RANGE FOR
KOOLZONE MOBILE SPOT A/C COOLER
IS FROM 64 - 104° FAHRENHEIT.
PROPER USUAGE OF THIS UNIT, AT THE COOLING DUCT,
WILL REDUCE THE AMBIENT TEMPERATURE
BETWEEN 10 - 15° FAHRENHEIT.

MAKE LIFE SIMPLE AND MORE CONVENIENT
WITH UNINEX
EXCLUSIVELY DISTRIBUTED BY:
UNINEX INTERNATIONAL
5780 SMITHWAY STREET COMMERCE, CA 90040
T. 800-864-3288 / 323-890-9246 / F. 323-890-9249
MANUFACTURE:
NAKATOMI CO.,LTD.
6445-2, TAKAI, TAKAYAMA, KAMITAKAI, NAGANO, JAPAN
SCAN ME
CONTACT US FOR PURCHASE OR RENTAL