Unverferth CROSS-FOLD ROLLING HARROW 1245 User manual
Seedbed Tillage
CROSS-FOLD ROLLING HARROW®
Models 1245/1245D
Soil Conditioner
Cross-Folding 32-40 Ft. Models
Beginning with Serial No. A61410100
Part No. 74919
CROSS-FOLD ROLLING HARROW 1245/1245D — Introduction
2
Foreword
This symbol identifies important safety messages. When you see it, read the mes-
sage that follows and be alert to the possibility of personal injury.
Remember, safety instructions stated in this manual are for your protection. Read them care-
fully and follow them closely when working around or using this machine.
Read and study this manual completely before attempting to operate this implement. Take this
manual to the field for handy reference when operating, adjusting, or servicing your machine.
When referenced, “Right-Hand” (RH) and “Left-Hand” (LH) side of the machine are determined
by standing behind the machine and facing in the direction of travel.
CROSS-FOLD ROLLING HARROW 1245/1245D — Introduction
3
FIG. 1
Product Information
The information, specifications, and illustrations in the manual are on the basis of information avail-
able at the time it was written. Due to continuing improvements in the design and manufacture
of Unverferth products, all specifications and information contained herein are subject to change
without notice.
SERIAL NUMBER
DECAL LOCATION
When ordering parts or when requesting further information or assistance, always give the
following information:
• Machine name
• Serial number
All products manufactured by Unverferth Mfg. Co., Inc. are warranted to be free from ma-
terial and workmanship
defects for one full year from time of consumer delivery. Your local
dealer will gladly assist you with any warranty questions.
Please fill out and retain this portion for your records. The serial number plate is located
on the inside of the main frame on the left-hand side of the machine (FIG. 1).
Purchase Date __________________ Model _____________Serial No._______________________________
Dealer ______________________________________ City __________________________________________
Dealer Contact ______________________________________ Phone ________________________________
CROSS-FOLD ROLLING HARROW 1245/1245D — Introduction
4
Foreword ........................................................................................................................................2
Product Information........................................................................................................................3
SECTION I
Safety
General Hazard Information ....................................................................................................... 1-2
Safety Decals ............................................................................................................................. 1-3
Following Safety Instructions ..................................................................................................... 1-4
Before Servicing......................................................................................................................... 1-4
Before Operating ........................................................................................................................ 1-5
During Operation ........................................................................................................................ 1-5
Before Transporting .................................................................................................................... 1-5
During Transport......................................................................................................................... 1-5
Pressurized Oil ........................................................................................................................... 1-6
Preparing for Emergencies......................................................................................................... 1-7
Wearing Protective Equipment ................................................................................................... 1-7
Table of Contents
CROSS-FOLD ROLLING HARROW 1245/1245D — Introduction
5
Table of Contents
SECTION II
Set Up
General Set Up Information ....................................................................................................... 2-2
12’ Base Shipping Bundles ....................................................................................................... 2-3
12’ Base, 10-14’ Wing Shipping Bundles................................................................................. 2-4
Optional Shipping Bundles & Accessories................................................................................. 2-6
Main Frame/Tire & Wheel.......................................................................................................... 2-7
Hitch........................................................................................................................................... 2-9
Jack ......................................................................................................................................... 2-10
Transport Chain........................................................................................................................ 2-11
Hose Holders............................................................................................................................ 2-12
Wings ....................................................................................................................................... 2-13
Wing Lift Wheel Assembly....................................................................................................... 2-16
SMV Emblem............................................................................................................................ 2-17
Transport Cylinder Stops.......................................................................................................... 2-18
Hydraulic Assembly .................................................................................................................. 2-18
Hose Routing Diagrams..................................................................................................... 2-19
Purging A Hydraulic System ............................................................................................. 2-20
Weight Transfer System Initial Settings................................................................................... 2-22
Wing Stands............................................................................................................................. 2-23
Drum Scraper Assembly .......................................................................................................... 2-25
Basket & Frame Assembly ...................................................................................................... 2-26
Optional Leveler Bar Assembly................................................................................................ 2-28
Spike Tooth........................................................................................................................ 2-28
Diagonal/Round Tooth ........................................................................................................ 2-29
Coil Tine Drag Bar............................................................................................................ 2-30
Diagonal Tooth One-Bar Layouts ............................................................................................. 2-32
Transport Marking & Light Kit................................................................................................. 2-34
Lights................................................................................................................................. 2-34
Transport Markings ............................................................................................................ 2-36
Wiring Harness .................................................................................................................. 2-37
Optional Reinforcement Disc Part #74964 .............................................................................. 2-39
Optional Pilot Check Valve Part #91240................................................................................. 2-41
Optional Dual Hydraulic Kit #74704FS.................................................................................... 2-42
Optional Wear Guard Kit (Basket Models Only) ...................................................................... 2-44
Optional Tire Scraper Kit #89360B ......................................................................................... 2-45
Gooseneck Hitch Assembly (Optional)...................................................................................... 2-47
CROSS-FOLD ROLLING HARROW 1245/1245D — Introduction
6
Table of Contents
SECTION III
Operation
General Operation Information ................................................................................................... 3-2
Preparing Tractor........................................................................................................................ 3-2
Preparing Primary Tillage Tool................................................................................................... 3-3
Rear Hitch On Primary Tillage Tool .................................................................................... 3-3
Preparing Rolling Harrow ........................................................................................................... 3-4
Bolts & Nuts........................................................................................................................ 3-4
Pins...................................................................................................................................... 3-4
Leveler Bar Mounting Arms ................................................................................................ 3-4
Hydraulics ............................................................................................................................ 3-4
Lubrication ........................................................................................................................... 3-4
Tire Pressure ....................................................................................................................... 3-4
Attaching Rolling Harrow Implement To Primary Tillage Tool or Tractor.................................. 3-5
Hydraulic Hook-Up............................................................................................................... 3-6
Unfolding The Wings.................................................................................................................. 3-7
Transport Chain.......................................................................................................................... 3-8
Transporting................................................................................................................................ 3-9
Unhitching ................................................................................................................................ 3-11
Field Adjustments..................................................................................................................... 3-12
Weight Transfer System..................................................................................................... 3-12
Rolling Harrow Basket....................................................................................................... 3-12
Basket Running Position.................................................................................................... 3-13
Normal Position........................................................................................................... 3-13
Alternate Position ........................................................................................................ 3-13
Leveler Bar .............................................................................................................................. 3-14
Tool Free Style Spring Pressure Adjustment .................................................................... 3-14
Spike Bar Adjustment........................................................................................................ 3-15
Diagonal Bar Adjustment................................................................................................... 3-15
Coil Tine Adjustment ......................................................................................................... 3-15
Tool Free Style Leveler Bar Lock-Up................................................................................ 3-16
Basket Pitch Adjustments ........................................................................................................ 3-17
CROSS-FOLD ROLLING HARROW 1245/1245D — Introduction
7
SECTION IV
Maintenance
Storage....................................................................................................................................... 4-2
Lubrication.................................................................................................................................. 4-3
Replacing Rolling Harrow Basket Bearings ............................................................................... 4-4
Replacing Spring Assemblies ..................................................................................................... 4-5
Hydraulic System ....................................................................................................................... 4-6
Troubleshooting........................................................................................................................... 4-7
Torque Chart .............................................................................................................................. 4-8
Hydraulic Fittings ....................................................................................................................... 4-8
Wheels and Tires....................................................................................................................... 4-9
Wheel Nut Torque................................................................................................................ 4-9
Tire Pressure ....................................................................................................................... 4-9
Tire Warranty ..................................................................................................................... 4-10
SECTION V
Parts
Hitch Components ...................................................................................................................... 5-2
Main Frame Components........................................................................................................... 5-4
Wing Components ...................................................................................................................... 5-6
Rolling Harrow Basket ............................................................................................................... 5-8
Basket Pin Up & Storage Box Components............................................................................ 5-11
Leveler Bar Components.......................................................................................................... 5-12
Leveler Bar Assemblies............................................................................................................ 5-14
Combination Valve #903045 Components ............................................................................... 5-16
Hydraulics With Combination Valve #903045.......................................................................... 5-18
Dual Hydraulic Kit #74704 for Valve #903045....................................................................... 5-20
Wing Transport Wheel & Hub Components ............................................................................. 5-22
Transport Marking & Light Kit (73146B)................................................................................. 5-24
Wear Guard Kit (Basket Models Only) .................................................................................... 5-26
Optional Lock/Check Valve....................................................................................................... 5-27
A-Frame Gooseneck Hitch Assembly (Optional)....................................................................... 5-28
Gooseneck Hitch Adapters (Optional)....................................................................................... 5-30
Table of Contents
CROSS-FOLD ROLLING HARROW 1245/1245D — Introduction
8
Notes
CROSS-FOLD ROLLING HARROW 1245/1245D — Safety
1-1
SECTION I
Safety
General Hazard Information ....................................................................................................... 1-2
Safety Decals ............................................................................................................................. 1-3
Following Safety Instructions ..................................................................................................... 1-4
Before Servicing......................................................................................................................... 1-4
Before Operating ........................................................................................................................ 1-5
During Operation ........................................................................................................................ 1-5
Before Transporting .................................................................................................................... 1-5
During Transport......................................................................................................................... 1-5
Pressurized Oil ........................................................................................................................... 1-6
Preparing for Emergencies......................................................................................................... 1-7
Wearing Protective Equipment ................................................................................................... 1-7
CROSS-FOLD ROLLING HARROW 1245/1245D — Safety
1-2
General Hazard Information
No accident-prevention program can be successful without the wholehearted cooperation of
the person who is directly responsible for the operation of the equipment.
A large number of accidents can be prevented only by the operator anticipating the result
before the accident is caused and doing something about it. No power-driven equipment,
whether it be transportation or processing, whether it be on the highway, in the field, or in
the industrial plant, can be safer than the person who is at the controls. If accidents are
to be prevented--and they can be prevented--it will be done by the operators who accept
the full measure of their responsibility.
It is true that the designer, the manufacturer, and the safety engineer can help; and they will
help, but their combined efforts can be wiped out by a single careless act of the operator.
It is said that, “the best kind of a safety device is a careful operator.” We, at Unverferth
Mfg. Co., Inc. ask that you be that kind of operator.
REMEMBER:
THINK SAFETY
A CAREFUL OPERATOR IS THE
BEST INSURANCE AGAINST AN
ACCIDENT!
SIGNAL WORDS
INDICATES AN EXTREMELY HAZARDOUS SITUATION OR ACTION THAT WILL RESULT
IN SERIOUS INJURY OR DEATH.
INDICATES A HAZARDOUS SITUATION OR ACTION THAT COULD RESULT IN SERIOUS
INJURY OR DEATH.
INDICATES AN UNSAFE SITUATION OR ACTION THAT MAY RESULT IN PERSONAL
INJURY.
Is used for instruction on operating, adjusting, or servicing a machine.
CROSS-FOLD ROLLING HARROW 1245/1245D — Safety
1-3
PART NO. 94094
PART NO. 97961
PART NO. 95136
PART NO. 95445
PART NO. 97575
PART NO. 95605
PART NO. 98229
PART NO. 9829
SMV Emblem
PART NO. 901891
Part #9003126
Red Reflector
Part #9003125
Fluorescent Reflector
Part #9003127
Amber Reflector
Safety Decals
CROSS-FOLD ROLLING HARROW 1245/1245D — Safety
1-4
• Read and understand this operator’s manual before operating.
• All machinery should be operated only by trained and authorized personnel.
• To prevent machine damage, use only attachments and service parts approved by the
manufacturer.
• Always shut tractor engine off and remove key before servicing.
• Avoid personal attire such as loose tting clothing, shoestrings, drawstrings, pants cuffs,
long hair, etc., that may become entangled in moving parts.
• Do not allow anyone to ride on the implement. Make sure everyone is
clear before operating machine or towing vehicle.
• Never attempt to operate implement unless you are in driver's seat.
• Avoid working under an implement; however, if it becomes absolutely un-
avoidable, make sure the implement is safely blocked.
• Ensure that all applicable safety decals are installed and legible.
• When working around the implement, be careful not to be cut by sharp edges.
• Explosive separation of a tire and rim can cause serious injury or death. Only properly
trained personnel should attempt to service a tire and wheel assembly.
Before Servicing
Following Safety Instructions
CROSS-FOLD ROLLING HARROW 1245/1245D — Safety
1-5
• Regulate speed to eld conditions. Maintain complete control at all times.
• Never service or lubricate equipment when in operation.
• Keep away from overhead power lines. Electrical shock can cause serious
injury or death.
• Use extreme care when operating close to ditches, fences, or on hillsides.
• Do not leave towing vehicle unattended with engine running.
During Operation
• Secure transport chains to towing vehicle before transporting. DO NOT transport without
chains.
• Install transport locks before transporting.
• Check for proper function of all available transport lights. Make sure that all reectors
are clean and in place on machine. Make sure that the SMV emblem and SIS decal are
visible to approaching traffic.
• This implement may not be equipped with brakes. Ensure that the towing vehicle has
adequate weight and braking capacity to tow this unit.
Before Transporting
• Do not stand between towing vehicle and implement during hitching.
• Always make certain everyone and everything is clear of the machine before beginning
operation.
• Verify that all safety shields are in place and properly secured.
• Ensure that all applicable safety decals are installed and legible.
• When working around the implement, be careful not to be cut by sharp edges.
Before Operating
CROSS-FOLD ROLLING HARROW 1245/1245D — Safety
1-6
Pressurized Oil
• Relieve the hydraulic system of all pressure before adjusting or servicing. See hydraulic
power unit manual for procedure to relieve pressure.
• High-pressure uids can penetrate the skin and cause serious injury or
death. Use cardboard or wood to detect leaks in the hydraulic system.
Seek medical treatment immediately if injured by high-pressure uids.
• Hydraulic system must be purged of air before operating to prevent serious injury or
death.
• Do not bend or strike high-pressure lines. Do not install bent or damaged tubes or hoses.
• Repair all oil leaks. Leaks can cause res, personal injury, and environmental damage.
• Route hoses and lines carefully to prevent premature failure due to kinking and rubbing
against other parts. Make sure that all clamps, guards and shields are installed correctly.
• Check hydraulic hoses and tubes carefully. Replace components as necessary if any of
the following conditions are found:
- End fittings damaged, displaced, or leaking.
- Outer covering chafed/cut or wire reinforcing exposed.
- Outer covering ballooning locally.
- Evidence of kinking or crushing of the flexible part of a hose.
• Comply with all laws governing highway safety when moving machinery.
• Use transport lights as required by all laws to adequately warn operators of other vehicles.
• Use good judgment when transporting equipment on highways. Regulate speed to road
conditions and maintain complete control.
• Maximum transport speed of this implement should never exceed 20 mph as indicated
on the machine. Maximum transport speed of any combination of implements must not
exceed the lowest specied speed of the implements in combination. Do not exceed 10
mph during off-highway travel.
• Slow down before making sharp turns to avoid tipping. Drive slowly over rough ground
and side slopes.
• It is probable that this implement is taller, wider, and longer than the towing vehicle. Be-
come aware of and avoid all obstacles and hazards in the travel path of the equipment,
such as power lines, ditches, etc.
During Transport
CROSS-FOLD ROLLING HARROW 1245/1245D — Safety
1-7
• Keep a rst aid kit and properly rated re extinguisher nearby.
• Keep emergency numbers for re, rescue, and poison control personnel
near the phone.
• Wear clothing and personal protective equipment appropriate for
the job.
• Wear steel-toed shoes when operating.
• Wear hearing protection when exposed to loud noises.
• Do not wear additional hearing impairing devices such as radio headphones, etc
Preparing for Emergencies
Wearing Protective Equipment
CROSS-FOLD ROLLING HARROW 1245/1245D — Safety
1-8
Notes
CROSS-FOLD ROLLING HARROW 1245/1245D — Set Up
2-1
SECTION II
Set Up
General Set Up Information ....................................................................................................... 2-2
12’ Base Shipping Bundles ....................................................................................................... 2-3
12’ Base, 10-14’ Wing Shipping Bundles................................................................................. 2-4
Optional Shipping Bundles & Accessories................................................................................. 2-6
Main Frame/Tire & Wheel.......................................................................................................... 2-7
Hitch........................................................................................................................................... 2-9
Jack ......................................................................................................................................... 2-10
Transport Chain........................................................................................................................ 2-11
Hose Holders............................................................................................................................ 2-12
Wings ....................................................................................................................................... 2-13
Wing Lift Wheel Assembly....................................................................................................... 2-16
SMV Emblem............................................................................................................................ 2-17
Transport Cylinder Stops.......................................................................................................... 2-18
Hydraulic Assembly .................................................................................................................. 2-18
Hose Routing Diagrams..................................................................................................... 2-19
Purging A Hydraulic System ............................................................................................. 2-20
Weight Transfer System Initial Settings................................................................................... 2-22
Wing Stands............................................................................................................................. 2-23
Drum Scraper Assembly .......................................................................................................... 2-25
Basket & Frame Assembly ...................................................................................................... 2-26
Optional Leveler Bar Assembly................................................................................................ 2-28
Spike Tooth........................................................................................................................ 2-28
Diagonal/Round Tooth ........................................................................................................ 2-29
Coil Tine Drag Bar............................................................................................................ 2-30
Diagonal Tooth One-Bar Layouts ............................................................................................. 2-32
Transport Marking & Light Kit................................................................................................. 2-34
Lights................................................................................................................................. 2-34
Transport Markings ............................................................................................................ 2-36
Wiring Harness .................................................................................................................. 2-37
Optional Reinforcement Disc Part #74964 .............................................................................. 2-39
Optional Pilot Check Valve Part #91240................................................................................. 2-41
Optional Dual Hydraulic Kit #74704FS.................................................................................... 2-42
Optional Wear Guard Kit (Basket Models Only) ...................................................................... 2-44
Optional Tire Scraper Kit #89360B ......................................................................................... 2-45
Gooseneck Hitch Assembly (Optional)...................................................................................... 2-47
CROSS-FOLD ROLLING HARROW 1245/1245D — Set Up
2-2
This section contains all of the instructions required for the complete assembly of the entire
Rolling Harrow implement.
For your safety, and the safety of others, use proper tools and equipment and always use
safe working procedures. Refer to these instructions before starting any work on your machine.
For ease of assembly, install all hardware loosely until assembly is complete and then tighten
according to “Torque Chart” unless otherwise specied.
• READ AND UNDERSTAND SAFETY RULES BEFORE OPERATING OR SERVICING THIS
MACHINE. REVIEW THE SAFETY SECTION IN THIS MANUAL, IF NECESSARY.
• TIPPING OR MOVEMENT OF THE MACHINE CAN CAUSE SERIOUS INJURY OR DEATH.
BE SURE THE MACHINE IS SECURELY BLOCKED.
• MOVING PARTS CAN CRUSH AND CUT. KEEP AWAY FROM MOVING PARTS.
• KEEP HANDS CLEAR OF PINCH POINT AREAS.
• TO PREVENT MACHINE FROM TIPPING BACKWARDS, UNIT MUST BE HOOKED TO
TRACTOR.
• FALLING OBJECTS CAN CAUSE SERIOUS INJURY OR DEATH. DO NOT WORK UNDER
THE MACHINE AT ANY TIME WHILE BEING HOISTED. THESE ASSEMBLY INSTRUC-
TIONS WILL REQUIRE SAFE LIFTING DEVICES UP TO 3,000 LBS. SPECIFIC LOAD
RATING FOR INDIVIDUAL LOADS WILL BE GIVEN AT THE APPROPRIATE TIME IN THE
INSTRUCTIONS.
• EYE PROTECTION AND OTHER APPROPRIATE PERSONAL PROTECTIVE EQUIPMENT
MUST BE WORN WHILE SERVICING THE IMPLEMENT.
• The procedures for assembling this unit were intended for two or more people.
Depending on the model you ordered, you should have received the following bundles:
General Setup Information
CROSS-FOLD ROLLING HARROW 1245/1245D — Set Up
2-3
Rolling Harrow - 12’ Base Shipping Bundles
Parts List
DESCRIPTIONQTYP/NITEM
MOUNTED TIRE & WHEEL160911@1
A-FRAME ASY - PTD173025@2
CARDBOARD BOX
1
XBOX-2-73146B
3
MAIN FRAME ASM
1
73258@
4
JACK MOUNT & STAND BUNDLE173314@5
SHIPPING CRATE1658356
CARDBOARD BOX1XBOX-9 - 73633B
7
4 FT BASKET ASSEMBLY
1
74603@
8A
BASKET/DRUM 4 FT
ASSY-AGGRESSIVE-1245
176031@8B
CARDBOARD BOX1913509
SHIPPING CRATE
1
OM88473
5
DRUM SCRAPER KIT - 4' 1245D176540@10
6
2
3
9
7
4
5
1
8B
10
8A
5
ITEM PART NO. DESCRIPTION QTY
160911 Mounted Tire & Wheel W815-6-08 TL9.5LB15 8Ply 6
273025G Cross Fold Hitch Assembly (Green) 1
73025R Cross Fold Hitch Assembly (Red)
373146B Lights/Transport Marking Package 1
473258G Main Frame Assembly (Green) 1
73258R Main Frame Assembly (Red)
573314G Jack Mount & Stand Bundle (Green) 1
73314R Jack Mount & Stand Bundle (Red)
673330B Hydraulic & Parts Box/Crate 1
773633B Weight Transfer Box 1
8A 74603B Basket & Frame 4’ (Double) Assembly (For Model 1245) 3
8B 76031B Roller Basket & Frame 4’ (Double) Assembly (For Model 1245D)
974515B Split Function Valve Kit 1
10 76540B Drum Scraper Kit 4’ (For Model 1245D) 3
NOTE: Refer to PARTS section for complete parts breakdown.
CROSS-FOLD ROLLING HARROW 1245/1245D — Set Up
2-4
Parts List
DESCRIPTIONQTYP/NITEM
4 FT BASKET ASSEMBLY
1
74603@
1A
BASKET/DRUM 4 FT
ASSY-AGGRESSIVE-1245
1
76031@
1B
DRUM SCRAPER KIT - 4' 1245D176540@2
WING 10 FT LH ASM176972@3
WING 10 FT RH ASM
1
76973@
4
WING 11 FT LH ASM176974@5
WING 11 FT RH ASM176975@6
WING 12 FT LH ASM176976@
7
WING 12 FT RH ASM
1
76977@
8
WING 13 FT LH ASM176978@9
WING 13 FT RH ASM176979@10
WING 14 FT LH ASM176980@11
WING 14 FT RH ASM
1
76981@
12
1A
1B
2
12
11
10
9
4
3
6
5
8
7
Rolling Harrow - 12’ Base 10’-14’ Wing Shipping Bundles
Other manuals for CROSS-FOLD ROLLING HARROW 1245
2
This manual suits for next models
1
Table of contents
Other Unverferth Farm Equipment manuals
Unverferth
Unverferth CROSS-FOLD ROLLING HARROW 1645 User manual
Unverferth
Unverferth PARKER Seed Chariot 2620 User manual
Unverferth
Unverferth BRENT V1100 User manual
Unverferth
Unverferth PARKER 605 User manual
Unverferth
Unverferth BLU-JET AT3015 User manual
Unverferth
Unverferth PARKER 1042 User manual
Unverferth
Unverferth Killbros 200 Series User manual
Unverferth
Unverferth Killbros SeedVeyor 102 User manual
Unverferth
Unverferth CROSS-FOLD ROLLING HARROW 1645 User manual
Unverferth
Unverferth AWS-30 User manual
Unverferth
Unverferth BLU-JET SubTiller II User manual
Unverferth
Unverferth BLU-JET TrackMaster II User manual
Unverferth
Unverferth BRENT 678 User manual
Unverferth
Unverferth MAXIMUS 100 Instruction Manual
Unverferth
Unverferth Killbros 1035 User manual
Unverferth
Unverferth BRENT V700 User manual
Unverferth
Unverferth 1000 User manual
Unverferth
Unverferth PARKER 524 User manual
Unverferth
Unverferth BLU-JET TrenchMaster User manual
Unverferth
Unverferth PARKER 742 User manual
