Unverferth Perfecta 10 User manual

Seedbed Tillage
Folding Perfecta® 30’ - 40’
Models 10 / 12 / 14
Serial Number A63510100 & Higher
Part No. 76596

FIELD CULTIVATORS — Introduction
2
Foreword
This symbol identifies important safety messages. When you see it, read the message that
follows and be alert to the possibility of personal injury.
Remember, safety instructions stated in this manual are for your protection. Read them
carefully and follow them closely when working around or using this machine.
Read and study this manual completely before attempting to operate this implement. Take this
manual to the field for handy reference when operating, adjusting, or servicing your machine.
When referenced, “Right-Hand” (RH) and “Left-Hand” (LH) side of the machine are determined
by standing behind the machine and facing in the direction of travel.

FIELD CULTIVATORS — Introduction
3
FIG. 1
SERIAL NUMBER DECAL
LOCATION
Product Information
The information, specifications, and illustrations in the manual are on the basis of information
available at the time it was written. Due to continuing improvements in the design and manu-
facture of Unverferth products, all specifications and information contained herein are subject to
change without notice.
When ordering parts or when requesting further information or assistance, always give the
following information:
• Model
• SerialNumber
All products manufactured by Unverferth Mfg. Co., Inc.  are warranted to be free from
material and workmanship defects for one full year from time of consumer delivery. Your
local dealer will gladly assist you with any warranty questions.
Please fill out and retain this portion for your records. The serial number plate is located
on the left-hand side of the center mast of the machine (Fig. 1).
PurchaseDate__________________ Model_____________Serial Number____________________________
Dealer ______________________________________ City __________________________________________
Dealer Contact ______________________________________ Phone ________________________________

FIELD CULTIVATORS — Introduction
4
Foreword ........................................................................................................................................2
Product Information........................................................................................................................3
SECTION I
Safety
General Hazard Information ....................................................................................................... 1-2
Safety Decals ............................................................................................................................. 1-3
Following Safety Instructions ..................................................................................................... 1-4
Before Servicing......................................................................................................................... 1-4
Before Operating ........................................................................................................................ 1-5
During Operation ........................................................................................................................ 1-5
Before Transporting .................................................................................................................... 1-5
During Transport......................................................................................................................... 1-6
Pressurized Oil ........................................................................................................................... 1-6
Preparing for Emergencies......................................................................................................... 1-7
Wearing Protective Equipment ................................................................................................... 1-7
Table of Contents

FIELD CULTIVATORS — Introduction
5
Table of Contents
SECTION II
Set Up
Set Up Checklist........................................................................................................................ 2-2
General Set Up Information ....................................................................................................... 2-3
Folding Perfecta — Shipping Bundles ...................................................................................... 2-4
Basic Set Up.............................................................................................................................. 2-8
Assemble Braces and Struts on Main Frame........................................................................... 2-9
SMV Emblem............................................................................................................................ 2-10
Transport Marking & Light Kits............................................................................................... 2-11
Lights................................................................................................................................. 2-11
Checking Function ............................................................................................................. 2-14
Maintenance....................................................................................................................... 2-14
Wing Assembly......................................................................................................................... 2-15
Hydraulic Assembly .................................................................................................................. 2-16
Hose Routing Diagram ...................................................................................................... 2-18
Purging Hydraulic System ................................................................................................. 2-20
Hydraulic System Checks.................................................................................................. 2-21
Hydraulic Storage .............................................................................................................. 2-21
Cylinder Stop Bracket.............................................................................................................. 2-22
Mounting Arm Assembly - Single Basket ............................................................................... 2-23
Mounting Arm Assembly - Double Basket .............................................................................. 2-24
Wing Stand Assembly .............................................................................................................. 2-25
Leveler Bar Assembly .............................................................................................................. 2-27
Spike Tooth Leveler Bar.................................................................................................... 2-27
Diagonal Tooth Leveler Bar............................................................................................... 2-28
Rolling Harrow Assembly - Single Basket .............................................................................. 2-29
Rolling Harrow Assembly - Double Basket ............................................................................. 2-30
Drum Scraper Assembly .......................................................................................................... 2-31
Drum Roller Assembly ............................................................................................................. 2-32
Stabilizer Wheels...................................................................................................................... 2-33
Overhead Layouts..................................................................................................................... 2-34