Uplift desk Bonnell acoustic puzzle wall User manual

Step 1

Align two panels as shown, with the long slots in the center of

the panels facing each other. Slide the long slots together as far

as possible so that the top and bottom edges of both panels

are ush with each other.

This will form the rst “X-shape” of your acoustic puzzle wall.

14.5’’ from ear to ear

Step 2

Using two more panels, make a second X-shape, but this time

do NOT slide the panels all the way together. Instead, slide

them only about 2/3 of the way together and go to Step 3.

Bonnell Acoustic Puzzle Wall

ACU064

Package Contents

Step 3

Align the two indicated outer ears of the X-shapes as shown.

Once the slots are in line with each other, slide them together

so that the top and bottom edges of those panels are ush

with each other.

Acoustic Puzzle panels

(panels ship in packs of 10)

Step 4

To complete the rst set of two X-shapes, align the slots near

the remaining two outer ears of each of the X-shapes and slide

them together so that the top and bottom edges of all four

panels are ush with each other.

Continue to add additional X-shapes following the previous

steps until the foundation level of your acoustic puzzle wall

reaches your desired width.

Each additional X-shape added to a level will increase the total

width by about 11.5”. Calculate how many X-shapes will be re-

quired to ll your space.

You can make your foundation level any width, but for stability,

we recommend no fewer than three X-shapes for the founda-

tion level of your puzzle wall.

Step 5

Build the second level by repeating steps 1-4. The second level

should be always be made with ONE X-SHAPE FEWER than

your foundation level.

Line up the slots of the second level with the slots of the rst

level and then press down evenly until all of the panels of the

second level are fully inserted into the panels of the foundation

level.

Note: the color difference shown in these instructions is only to

illustrate the difference between the odd and even-numbered

levels, and how they interconnect.

Two X-Shapes: about 26’’ from ear to ear Three X-Shapes: about 37.5’’ from ear to ear

Step 6

Build a third level (and subsequent odd number levels) the

same width as the foundation level by repeating Steps 1-4 again.

Then refer to Step 5 to attach the third level to the second level.

The ends of the third level (and subsequent odd number levels)

should be in line with the ends of the foundation level and both

levels should be oriented the same way as shown.

Step 7

Continue to add levels by following the previous steps.

Remember that odd-numbered levels should be the same

width as the foundation level and even-numbered levels should

be one X-shape shorter than the foundation level.

Copyright Notice: These instructions are a component of this product. These instructions are part of the scope of delivery, even if the item is resold. These instructions are also available on the UPLIFT Desk website: uplift-

desk.com. Excerpts or copies may not be forwarded to third parties or used in any other published form without the prior written consent of UPLIFT Desk. These instructions are subject to United States copyright law.

CAUTION: Read all instructions before use. Retain manual for future reference.

CAUTIONS & WARNINGS

AI-ACU064-1.0

Step 8

We recommend building your puzzle wall no higher than 11 lev-

els (6 feet) and no fewer than three X-shapes wide (as shown).

This manual suits for next models

Table of contents

Other Uplift Desk Office Equipment manuals