URBAN OUTFITTERS SOREN SHELF User manual

Page 1 of 3
SOREN SHELF
Assembly Instructions
A) Top Metal Shelf x1 D) Bottom Metal Shelf x1
F) Metal tube rail x4 H) Bolt [M6xL20mm] x4
I) Adjustable Leveler x4
G) Metal Tube Glide x4
J) Allen Key x1
B ) Second Metal Shelf x2
E) Metal tube with threaded
stud x6
C) Third Metal Shelf x1
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips head screw driver
WARNINGS:
At least two people recommended for assembly
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
Do not drag the shelf while moving
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight.
Do not place overheat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
PARTS INCLUDED
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
URBAN OUTFITTERS

SOREN SHELF
Assembly Instructions
Page 2 of 3
STEP 1
Lay down all the parts on aclean carpet or cardboard for assembly. Align Top Metal Shelf (A) and Metal tube with
threaded insert (E) as shown and screw tight.Align Second metal shelf (B) to metal tube with threaded
insert (E), and metal tube rail (F) as shown and screw tight.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
URBAN OUTFITTERS

SOREN SHELF
Assembly Instructions
Page 3 of 3
STEP 3
Align third metal shelf (C) to the Metal tube with threaded insert (E) and Metal tube rail (F) above as shown.
Insert Bolt (H) into the metal tube rail (F) above the third metal shelf (C) and tighten with Allen key (J). Screw
the additional Metal tube rails (F) into the studs below the third metal shelf (C) as shown.
STEP 4
Align Bottom metal shelf (D) to the Metal tube with threaded insert (E) and Metal tube rail (F) above as shown.
Insert Bolt (H) into the metal tube rail (F) above the bottom metal shelf (C) and tighten with Allen key (J). Screw
the Metal tube glide (G) into the studs in the Bottom metal shelf (D) and Metal tube with threaded insert (E) as
shown. Screw the adjustable levelers (I) into the Metal tube glide (G).
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.© 2017 UO, Inc.
All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.