URBAN OUTFITTERS Ebba Bed User manual

Ebba Bed
Assembly Instructions
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips Head Screwdriver
WARNINGS:
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air
conditioning vents. Adjust levelers so that the furniture sits flat on
uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use
COMPONENTS
Page 1 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
HB
FB
SB
SB
H
I
PARTS INCLUDED
H))Slats x1I)) Support Leg x1
HB) HEAD BOARD
x1
FB) FOOT BOARD
x1
SB) SIDE BOX
x2

Ebba Bed - Head Board
Assembly Instructions
Page 2 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
HEAD BOARD
A
B
B
E
F
FD
D
C
F
F
E1
PARTSINCLUDED
A) HB Top Panel
x1
1) Cam Bolt
[T24] x262) Cam Lock [D15 x 9.5mm] x263) Wood Dowel [M8 x 30mm] x21
E1) HB Back Panel R
x1
HARDWARE INCLUDED
F) Drawer Box
x4
B) HB End Panel
x2
C) HB Front Panel
x2
D) HB Shelf
x2
E) HB Back Panel L
x1

Page 3 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 1
Screw the cam bolts(1) into the pre-drilled holes in the HB Top Panel (A), HB Front Panel (C) & HB
Back Panel L & R (E & E1) as shown.
STEP 2
Insert the dowels (3) into the holes in the edge of the HB End Panels (B). Place the HB End Panels
(B) onto the cam bolts (1) attached to the HB Front Panel (C) as shown.
FRONT
1
A
C
EE1
B
B
C
C
B
3
Ebba Bed - Head Board
Assembly Instructions

Page 4 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 3
Insert the cam locks(2) into the holes in the HB End Panels (B) as shown. Tighten with
Phillips head screwdriver (not provided) as shown.
STEP 4
Insert the dowels (3) into the holes in the edge of the HB Shelves (D). Place the HB Shelves (D)
onto the cam bolts (1) attached to the HB Front Panel (C) as shown.
B
BB
C
C
2
3
C
D
D
D
C
B
B
Ebba Bed - Head Board
Assembly Instructions

Page 5 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 6
Insert the dowels (3) into the holes in the edge of the HB End Panels (B) and HB Shelves (D). Place the
HB Back Panel L & R (E & E1) onto the HB End Panels (B) and HB Shelves (D) aligning the cam bolts
(1) and dowels (3) as shown.
STEP 5
Insert the cam lock (2) into the holes in the HB Shelves (D) as shown. Tighten with Phillips head
screwdriver (not provided) as shown.
D
D
D
C
2
BD
D
D
B
B
E
E1
E1
3
C
C
B
B
Ebba Bed - Head Board
Assembly Instructions

Page 6 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 7
Insert the cam lock (2) into the holes in the HB End Panels(B) and HB Shelves (D) as shown.
Tighten with Phillips head screwdriver (not provided) as shown.
STEP 8
Insert the dowels (3) into the holes in the edge of the HB End Panels(B), HB Front Panel (C) and HB Back
Panel L & R (E & E1). Place the HB Top Panel (A) onto the HB End Panels(B), HB Front Panel (C) and HB
BackPanel L & R (E & E1) aligning the cam bolts (1) and dowels (3) as shown.
E1 D
BE1
D2
B
B
D
E
E
2
A
3
C
E
B
A
C
B
E
E1
C
Ebba Bed - Head Board
Assembly Instructions

Page 7 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 9
Insert the cam locks (2) into the holes in the HB End Panels (B), HB Front Panel (C), HB Back
Panel L & R (E & E1) as shown. Tighten with Phillips head screwdriver (not provided) as shown.
STEP 10
Insert drawer boxes (F) into place.
A
E
A
B
C
C
B
E
E1
F
F
2
Ebba Bed - Head Board
Assembly Instructions

Page 8of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
FOOT BOARD
G
H
I
K
J
L
H1
PARTSINCLUDED
HARDWARE INCLUDED
1) Cam Bolt
[T24] x28
2) Cam Lock
[D15 x 9.5mm] x28
3) Wood Dowel
[M8 x 30mm] x 24
G) FB Top Panel
x1
I) FB Back Panel
x1
J) FB Middle Panel
x1
H) FB Side Panel L
x1
H1) FB Side Panel R
x1
K) FB Shelf L
x1
L) FB Shelf R
x1
Ebba Bed - Foot Board
Assembly Instructions

Page 9 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 11
Screw the cam bolts(1) into the pre-drilled holes in the FB Top Panel (G), FB Side Panel L & R (H & H1),
FB Back Panel (I) and FB Middle Panel (J) as shown.
STEP 12
Insert the dowels (3) into the FB Shelf L (K) and FB Shelf R (L). Place the FB Shelf L (K) and FB Shelf R
(L) onto the cam bolts (1) attached to the FB Middle Panel (J) as shown.
FRONT
G
I
H
J
H1
JL
K
KJ
1
3
Ebba Bed - Foot Board
Assembly Instructions

Page 10 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 14
Insert the dowels (3) into the FB Middle Panel (J), FB Shelf L (K) and FB Shelf R (L). Place the FB Middle
Panel (J), FB Shelf L (K) and FB Shelf R (L). onto the cam bolts (1) attached to the FB Back Panel (I) as
shown.
STEP 13
Insert the cam locks (2) into the holes in the FB Shelf L (K) and FB Shelf R (L) as shown. Tighten
with Phillips head screwdriver (not provided) as shown.
J
L
KJ
L
K
2
3
K
I
I
K
J
L
Ebba Bed - Foot Board
Assembly Instructions

Page 11 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 16
Insert the dowels (3) into the FB Back Panel (I), FB Shelf L (K) and FB Shelf R (L). Place the FB Side
Panel L & R (H & H1) onto the FB Back Panel (I), FB Shelf L (K) and FB Shelf R (L) aligning the cam
bolts (1) and dowels (3) as shown.
STEP 15
Insert the cam lock (2) into the holes in the FB Middle Panel (J), FB Shelf R (K) and FB Shelf L (L) as
shown. Tighten with Phillips head screwdriver (not provided) as shown.
2
K
K
I
I
J
L
K
L
I
H
I
L
H1
H1
3
J
Ebba Bed - Foot Board
Assembly Instructions

Page 12 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 1 8
Insert the dowels (3) into the FB Side Panel L & R (H & H1), FB Back Panel (I) and FB Middle Panel (J).
Place the FB Top Panel (G)onto the FB Side Panel L & R (H & H1), FB Back Panel (I) and FB Middle
Panel (J) aligning the cam bolts (1) and dowels (3) as shown.
STEP 17
Insert the cam locks (2) into the holes in the FB Shelf L (K) and FB Shelf R (L) as shown. Tighten
with Phillips head screwdriver (not provided) as shown.
H1
L
K
H
L
H1
2
3
H
H
I
G
G
I
J
H1
I
J
Ebba Bed - Foot Board
Assembly Instructions

Page 13 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 20
Insert the cam locks (2) into the holes in the FB Back Panel (I) as shown. Tighten with Phillips
head screwdriver (not provided) as shown
STEP 19
Insert the cam locks (2) into the holes in the FB Side Panel L & R (H & H1) and FB Middle (J) as shown.
Tighten with Phillips head screwdriver (not provided) as shown.
BACK
H1
J
H
G
G
2
I
I
2
Ebba Bed - Foot Board
Assembly Instructions

Page 14 of 24
A) SB Top Panel
x2
1) Cam Bolt
[T24] x48
2) Cam Lock
[D15 x 9.5mm] x48
3) Wood Dowel
[M8 x 30mm] x40
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
B) SB Side Panel L
x2
E) SB Middle Panel
x2
F) SB Door L
x2
G) SB Door R
x2
A
B
D
EC
G
F
B1
SIDE BOXES
PARTS INCLUDED
HARDWARE INCLUDED
B1) SB Side Panel R
x2
C)SB Back Panel
x2
D)SB Base Panel
x2
Ebba Bed - Side Boxes
Assembly Instructions

Page 15 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 21
Screw the cam bolt (1) into the pre-drilled holes in the SB Top Panel (A), SB Side Panel L & R (B &
B1), SB BackPanel (C) and SB Base Panel (D) as shown.
STEP 22
Insert the dowels (3) into the holes in the edge of the SB Base Panel (D). Place the SB Base Panel (D)
onto the cam bolts (1) attached to the SB Back Panel (C) as shown.
FRONT
FRONT
A
C
B
D
B1
D
C
C
D
3
1
Ebba Bed - Side Boxes
Assembly Instructions

Page 16 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 23
Insert the cam locks (2) into the holes in the SB Base Panel (D) as shown. Tighten with Phillips
head screwdriver (not provided) as shown.
STEP 2 4
Insert the dowels (3) into the holes in the edge of the SB Back Panel (C) and SB Base Panel (D).
Place the SB Back Panel (C) and SB Base Panel (D) onto the cam bolts (1) attached to the SB Side
Panel L & R (B & B1) as shown.
D
C
C
D
2
D
CD
B
B1
B1
3
Ebba Bed - Side Boxes
Assembly Instructions

Page 17 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 2 6
Insert the dowels (3) into the holes in the edge of the SB Middle Panel (E). Place the SB Middle Panel
(E) onto the cam bolts (1) attached to the SB Base Panel (D) as shown.
STEP 25
Insert the cam locks (2) into the holes in the SB Back Panel (C) and SB Base Panel (D) as shown.
Tighten with Phillips head screwdriver (not provided) as shown.
2
C
C
D
D
B
B1
B1
ED
ED
3
B1
B
C
Ebba Bed - Side Boxes
Assembly Instructions

Page 18 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 27
Insert the cam locks (2) into the holes in the SB Middle Panel (E) as shown. Tighten with Phillips
head screwdriver (not provided) as shown.
STEP 28
Insert the dowels (3) into the holes in the edge of the SB Side Panel L & R (B & B1), SB Back Panel
(C) and SB Middle Panel (E). Place the SB Top Panel (A) onto the SB Side Panel L & R (B & B1),
SB Back Panel (C) and SB Middle Panel (E) aligning the cam bolts (1) and dowels (3) as shown.
D
E
E
D
2
A
A
C
B
B
C
E
B1
3
C
B
B1
Ebba Bed - Side Boxes
Assembly Instructions

Page 19 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 29
Insert the cam locks (2) into the holes in the SB Side Panel L & R (B & B1)SB Back Panel (C) and
SB Middle Panel (E) as shown. Tighten with Phillips head screwdriver (not provided) as shown.
B1
B1
A
A
A
C
E
C
B2
2
Ebba Bed - Side Boxes
Assembly Instructions

Page 20 of 24
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 31
Adjust SB Door L (F) hardware.
PUSH PIN TO LOCK
PUSH BUTTON
TO UNLOCK
FF
STEP 30
Insert SB Door L (F) into place.
ADJUST SCREW USING
PHILLIPS HEAD SCREWDRIVER(NOT PROVIDED)
TO LEVELS THE SR DOOR L
IF NECESSARY.
DOWN
UP
F
Ebba Bed - Side Boxes
Assembly Instructions