URBAN OUTFITTERS RYAN CABINET User manual

RYAN CABINET
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 1 of 2
TOOLS REQUIRED BUT NOT INCLUDED: N/A
Do not throw away packing materials and carton until after
assembly. Assemble all parts on a clean smooth surface
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place overheat or air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden
area. You may need to re-tighten all bolts after initial
use.
PARTS INCLUDED
(A) Metal Cabinet
x1
(B) Plastic Locking Casters
x4
(C) Flat Washer
x4
(D) Open Wrench
x1

RYAN CABINET
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent
rights. Any unauthorized reproduction, adaptation, distribution or other infringement will be
prosecuted.
Page 2 of 2
STEP 1
Gently place Metal Cabinet (A) on a clean smooth surface such as cardboard or carpet on its back. Insert flat washer
(C) around plastic locking casters (B) as shown and screw into the Metal Cabinet (A) . Tilt upright to complete
assembly.