URBAN OUTFITTERS Armand 78232089 User manual

Assembly Instructions
Do not throw away packing materials and carton until after assembly.
Assemble all parts on a clean smooth surface
The assembly of this item requires x 2 people.
CARE INSTRUCTIONS:
Avoid direct exposure to sunlight. Do not place over heat or Air conditioning vents.
Adjust levelers so that the furniture sits flat on uneven floors.
Blot spills do not rub, with a clean white cloth.
Do not use harsh chemicals.
Before cleaning any part test a small spot in a hidden area.
You may need to re-tighten all bolts after initial use.
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 1 of 6
ARMAND VANITY
HARDWARE LIST
TOOLS REQUIRED BUT NOT INCLUDED:
Phillips Head Screw Driver
PARTS INCLUDED
(9) Screw
M4 x 30mm
Quantity: 4pcs
(7) Allen key
Quantity: 1pc
(A) Table side frame
Quantity: 2pcs (B) Table top frame Quantity: 1pc (D) Table back rail Quantity: 2pcs
(E) Chair side frame
Quantity: 2pcs (G) Seat cushion
Quantity: 1pc (H) Mirror
Quantity: 1pc
(F) Chair rail
Quantity: 4pcs
(1) Bolt
M8 x 35mm
Quantity: 6pcs
(6) Wood dowel
M8 x 40mm
Quantity: 24pcs
(C) Table middle rail
Quantity: 1pc
(3) Flat Washers
M8
Quantity: 6pcs
(4) Round Washer
M8
Quantity: 12pcs
(8) Wrench
Quantity: 1pc
(2) Bolt
M8 x 80mm
Quantity: 12pcs
(5) Hex nut
M8 x 12mm
Quantity: 12pcs

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 2 of 6
ARMAND VANITY
STEP 1. Align table top frame (B) with table middle rail (C). Insert bolts (1), flat washers (3) into the holes in table top
frame (B). Tighten with Allen key (7).
I
3 1 7
C B
A
B
H
A
D
C
E
E
F
F
G

STEP 2. Align table side frames (A) with table top frame (B) assembly. Insert wood dowel (6), bolts (2) as shown.
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted. Page 3 of 6
ARMAND VANITY
STEP 3. Insert round washer (4), hex nuts (5) into holes as shown. Tighten with the spanner (8).
8
5 4 2
A
A
D
D
B
C
A
2
6

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
ARMAND VANITY
STEP 4. Insert bolts (1), flat washers (3) into the holes as shown. Tighten with Allen key (7).
STEP 5. Turn the adjustable feet so the vanity sits flat on the ground then insert the mirror (H) between the table back rail
and table top frame.
Page 4 of 6
7
3
H
1

STEP 6. Align chair side frames (E) with chair rails (F). Insert wood dowels (6), bolts (2) into the holes as shown.
Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
STEP 7.
8
Insert round washer (4), hex nuts (5) into the holes as shown. Tighten with wrench (8).
ARMAND VANITY
Page 5 of 6
5
4
F
E
2
E
E
F
6
2
E
F
F
E
E
F
F

Assembly Instructions
EXCLUSIVE AND CONFIDENTIAL PROPERTY OF URBAN OUTFITTERS, INC.
© 2017 UO, Inc. All rights reserved, including all applicable copyright, design and patent rights.
Any unauthorized reproduction, adaptation, distribution or other infringement will be prosecuted.
710mm [28"]
ARMAND VANITY
Page 6 of 6
STEP 8. Place seat cushion (G) into the assembled chair frame as shown. Insert screws (9) from the bottom up.
Tighten using a screwdriver (not provided). Turn the adjustable feet so the chair sits flat on the ground.
FINISH
F
9
465mm [18 1/4"]
508mm
[20"]
544mm [21 3/8"]
863mm [34"]
609mm [24"]
477mm [18 3/4"]
508mm [20"]
G