URC HS-R100 User manual

HomeSet HS-R100 Remote Control
Owner’s Manual

Table of Contents
Congratulations.............................................................................2
Features and Benefits..................................................................2
Before Getting Started.................................... .............................3
Parts Guide......................................................................................3
Connecting the Lithium Polymer Battery..............................4
Using the Micro USB Charger.....................................................4
Two-Way via Wi-Fi...................................................................... ..4
Using the HomeSet HS-R100......................................................5
Displaying the Settings Screen..................................................6
Network Settings...........................................................................7
Base Station (Hub) Setup............................................... .............7
TRF-ZW Z-Wave Accessory Account Info...............................8
Sleep Timers.................................... ..................................... ..........9
Brightness................................................................................. ....10
System.............................................................................................11
Button Light..................................................................................12
Power..............................................................................................13
Sound..............................................................................................14
Pickup.............................................................................................15
Firmware Update............................................................ ............16
Factory Default............................................................................17
Exit...................................................................................................17
Specifications...............................................................................18
USA Limited Warranty Statement.........................................18
End User Agreement..................................................................22
Precautions and Information Concerning Rechargeable
Lithium Polymer Batteries......................................................22
Home Set HS-R100 Remote Control Owner’s Manual

1
Owner’s Manual - HS-R100 Remote Control
© 2016 Universal Remote Control, Inc. All rights reserved.
The information in this manual is copyright protected. No
part of this manual may be copied or reproduced in any form
without prior written consent from Universal Remote
Control.
Universal Remote Control SHALL NOT BE LIABLE FOR
OPERATIONAL, TECHNICAL, OR EDITORIAL,
ERRORS/OMISSIONS MADE IN THIS MANUAL. The
information in this manual is subject to change without prior
notice.
HS-R100 Owner’s Manual © 2016 Universal Remote Control,
Home Set HS-R100 Remote Control Owner’s Manual

2
Congratulations!
Thank you for purchasing the HS-R100 Wi-Fi remote control
for your home automation system. This remote offers two-
way control of your connected devices throughout the home
or small office space. Controlling and monitoring your home’s
devices is as simple as using the HS-R100’s Wi-Fi
communication.
Features and Benefits
● Quick Connect Wi-Fi
When picked up, the HS-R100 connects to Wi-Fi within
moments to control your home audio/video systems and
devices.
● Two-way meta-data feedback
Experience two-way feedback right on the remote’s
screen when used with compatible Z-Wave home
devices like thermostats, lighting, or a selection of IP
Cameras. Enjoy the same feedback when used in
conjunction with an ever-expanding line of 3rd party
products.
● Pick-up sensor
Lifting the remote immediately wakes up, turns on the
backlight, and the LCD screen, and quickly connects to
the local Wi-Fi for control of your home system.
● Rechargeable Lithium Polymer Battery
Save money and protect the environment by using the
included micro USB charger and rechargeable lithium
polymer battery.
Home Set HS-R100 Remote Control Owner’s Manual

3
Before Getting Started
● Designed for use on your local wireless network The
HomeSet HS-R100 Remote Control is designed for use on
your local wireless network. Used in conjunction with a
HomeSet HS-C100 Base Station, the HS-R100 can also
control your home’s audio/video devices. By using a local
wireless network connection, the HS-R100 Remote
Control can control your system without being in line-of-
sight of the equipment by sending commands over your
home network.
● Programmable via a simple web page interface
To fully automate your home entertainment, comfort,
and security system use the HomeSet web based
programming software, downloading and saving the file
on the HomeSet server. All that is needed is basic
knowledge of devices within your home, and the settings
of your local Ethernet network.
Parts Guide
What’s included in the HS-R100 box:
● HS-R100 Wi-Fi Remote Control
● Rechargeable Battery
● AC Power Adapter
● Owner’s Manual
Home Set HS-R100 Remote Control Owner’s Manual

4
Connecting the Lithium Polymer Battery
Press the spring lock down to unlock and remote the cover.
The battery is included in the box when shipped from the
factory. Place the battery into the battery compartment,
making sure to align the contacts on the battery to the
contacts on the HS-R100. The battery snaps into place when
aligned properly. Replace the cover.
Using the Micro USB Charger
Plug the micro USB charger into a power outlet and into the
bottom of the HS-R100 Remote Control. There is no harm in
leaving the HS-R100 Remote Control plugged in and charging
when it is not in use.
Two-Way via Wi-Fi
To use the HS-R100 with any two-way companion product, it
must be configured to be part of a LAN (local area network)
via a Wi-Fi b/g/n access point or router.
Home Set HS-R100 Remote Control Owner’s Manual

5
Using the HomeSet HS-R100
The HS-R100’s Home Menu pages display the activities and
device in your system. Press the Home page button to view
your activities and devices. Navigate the home page by using
the Up and Down Navigation buttons. Press any button
adjacent to the screen to select an activity or device. Press
the Home button to return to that page and select a new
device or activity.
Home Set HS-R100 Remote Control Owner’s Manual

6
Displaying the Settings Screen
You can enter the Settings menu by pressing and holding the
Home and Enter (ENT) buttons for three seconds. Use the
Up and Down navigation buttons to navigate between the
Settings Items. To select, press the button on the side of the
LCD screen or the Select button when a line item is
highlighted. To go back a step or to get out of the Settings
menu, press the Home button.
Shown below is the expanded view of the HS-R100 Settings
Menu, showing all available Setup Menu options.
Note: not all options on this image are available on the
screen at once.
Home Set HS-R100 Remote Control Owner’s Manual

7
Network Settings
The screen displays network information about your HS-
R100 Remote Control and the wireless network it is
connected to. Within this screen you are able to scan for Wi-
Fi networks, select a network to connect to, and enter any
custom settings required.
Base Station (HUB) Setup
After connecting the HS-C100 Hub to the local network,
selecting the Base Station setup item results in the display of
the available HS-C100 Hubs within the home. Base stations
are identified by their MAC Address, which is displayed on a
sticker attached to the HS-C100 Hub.
Home Set HS-R100 Remote Control Owner’s Manual

8
Selecting an HS-C100 Hub results in the display of a screen
that allows the viewing and setting of custom Base Station
network properties.
TRF-ZW Z-Wave Accessory Account Info
The Accessory Account info item
allows the entry of an URC TRF-ZW
Z-Wave account username and
password. The HS-R100 Remote
Control provides a two-way interface
to these devices over the local
wireless Ethernet network (as seen
below).
Home Set HS-R100 Remote Control Owner’s Manual

9
Contact your installation professional to acquire Z-Wave
home lighting, comfort and security products to use with
your HS-R100 Remote Control.
Sleep Timers
You can adjust the amount of time the LCD remains ON when
the remote is not in use. The time can be set independently
based on whether the remote is using battery power or
connected to the Micro USB charger.
Selecting an item on this screen allows for the setting of each
Sleep Timer value. Once the Sleep Timers are adjusted, press
the Save button. Pressing the Go Back button reverts to the
remote control's last saved setting.
Home Set HS-R100 Remote Control Owner’s Manual

10
Brightness
Selecting the Brightness item results in the display of a
screen that allows for setting the brightness of the HS-R100
Remote Control’s LCD Screen.
Adjust the screen brightness by pressing the adjacent hard
buttons to increase or decrease the brightness level. Once
the brightness is adjusted, press the Save button. Pressing
the Go Back button reverts to the remote’s last saved
settings.
Note: The higher the brightness, the faster the battery
depletes.
Home Set HS-R100 Remote Control Owner’s Manual

11
System
The System information screen displays data about your HS-
R100’s Operating System and Memory, among other
information. Press the More button to view further system
information. Pressing Go Back button exists to remote’s
Settings menu.
Home Set HS-R100 Remote Control Owner’s Manual

12
Button Light
You can adjust the brightness of the LEDs that backlight the
buttons of the HS-R100. Press the adjacent hard buttons to
increase or decrease the button light level. Once the button
light is adjusted, press the Save button. Pressing the Go
Back button reverts the remote’s last saved setting.
Home Set HS-R100 Remote Control Owner’s Manual

13
Power
You can display the remaining battery level by selecting
Power. You can also adjust when the Low Battery warning
screen appears. Once the power is adjusted, press the Save
button. Pressing the Go Back button reverts to the remote’s
last saved setting.
Home Set HS-R100 Remote Control Owner’s Manual

14
Sound
You can adjust the button sounds of the HS-R100. Press the
adjacent hard buttons to increase or decrease the button
volume level. Once the sound is adjusted, press the Save
button. Pressing the Go Back button reverts to the remotes
last saved setting.
Home Set HS-R100 Remote Control Owner’s Manual

15
Pickup
You can set your HS-R100 to turn on when the remote is
picked up. Simply select Low, Med, or High (Turn ON) or
Off. After the pickup has been adjusted, the System Menu is
displayed once again.
Home Set HS-R100 Remote Control Owner’s Manual

16
Firmware Update
Selecting Firmware Update results in the display of a screen
that checks for a firmware update for the HS-R100 Remote
Control and the HS-C100 Hub (if necessary). If a firmware
update is available, the below screen is displayed.
Selecting Yes starts the firmware update process. Selecting
No results in the display of the HS-R100 System Menu. If a
firmware update is not available, the screen below displays.
Home Set HS-R100 Remote Control Owner’s Manual

17
Factory Default
WARNING! Selecting this button resets the memory of the
HS-R100 to the factory settings. All programming will be
lost! Selecting Yes sets the HS-R100 to factory default.
Selecting No returns the HS-R100 to the Setup Menu screen.
Exit
When you have finished adjusting Settings, simply press the
Exit button to return to normal operation.
Home Set HS-R100 Remote Control Owner’s Manual

18
Specifications
LCD: 2 Inch Screen (240 by 320) LCD Backlighting by LED
Devices: Supports up to 255 Devices with text, less with
heavy graphics
Usage Pages: Supports up to 255 Pages on each Device with
text, less with heavy graphics usage
Macro Capability: Up to 255 steps each, however nesting is
allowed
Wi-Fi: IEEE 802.11 b/g/n
Battery: Lithium polymer, 1,960mAh
Battery Charging Time: 5 hours
Size: 8.66” H x 2.04” W x 1.19” D
Battery Warranty: 90 Days
Weight (with battery loaded): 5.6 oz
Limited Warranty Statement
1. Limited Warranty and Disclaimers
Universal Remote Control, Inc. (”URC”) warrants that the
URC equipment shall be free from defects in material and
workmanship under normal usage for two (2) years from
purchase when such is purchased from URC. This limited
warranty is valid only in the United States of America. URC
warrants that the software will substantially conform in any
material respect to its functional specifications at the time of
delivery. URC SHALL NOT BE LIABLE FOR OPERATIONAL,
TECHNICAL, OR EDITORIAL ERRORS AND/OR OMISSIONS
MADE IN THE URC DOCUMENTATION. URC DOES NOT
WARRANT THAT THE URC SOFTWARE IS BUG-FREE OR
ERROR FREE OR THAT THERE ARE NO ERRORS/BUGS IN
THE URC SOFTWARE.
URC warrants that at the time of purchase the URC
equipment and the URC software complied with all
Home Set HS-R100 Remote Control Owner’s Manual