urmet domus 1723 User manual

DS 1723-029 LBT 20474
Mod.
1723
ONE- AND TWO-HOUSEHOLD KIT WITH PANEL AND COLOUR
7” HANDS-FREE MONITOR
Ref. 1723/71 - 1723/72 (*)
USAGE BOOKLET
(*) (*)
IP45
IK07
IP45
IK07

2DS1723-029
TABLE OF CONTENTS
HOW TO TURN ON THE SCREEN AND ACCESS THE VARIOUS FUNCTION ..................................................... 3
RECEIVING A VIDEO DOOR PHONE CALL FROM OUTSIDE ................................................................................ 3
INTERCOM CALL.................................................................................................................................................... 5
CONTROLLING THE CAMERA ............................................................................................................................... 7
VIDEO DOOR PHONE ANSWERING SERVICE....................................................................................................... 8
VIDEO DOOR PHONE ANSWERING DEVICE ACTIVATION............................................................................. 8
MESSAGE TO THE VISITOR ................................................................................................................................... 8
RECORDING THE MESSAGE........................................................................................................................... 8
ACTIVATING THE MESSAGE ........................................................................................................................... 9
VIDEOCLIP CONSULTATION................................................................................................................................ 10
SAVING VIDEOCLIPS............................................................................................................................................ 10
DELETING VIDEOCLIPS ....................................................................................................................................... 12
ACTIVATING HOME AUTOMATION COMMANDS ............................................................................................... 13
AUDIO POST-IT ................................................................................................................................................... 15
RECORDING MESSAGES .............................................................................................................................. 15
LISTENING TO MESSAGES ........................................................................................................................... 16
DELETING MESSAGES .................................................................................................................................. 16
AUTOMATIC DOOR OPENER............................................................................................................................... 17
ALARMS ................................................................................................................................................... 17
ARMING ................................................................................................................................................... 17
ALARM ................................................................................................................................................... 18
SIGNALLING THE ALARM HAVING BEEN ACTIVATED (ALARM MEMORY)................................................. 19
DEACTIVATION............................................................................................................................................... 19
CONSULTING THE ALARM LOG MENU........................................................................................................ 19
SAVING THE ALARM LOG MENU.................................................................................................................. 20
DELETING THE ALARM LOG ......................................................................................................................... 21
DOOR OPENING LOG .......................................................................................................................................... 22
CLEANING THE SCREEN ..................................................................................................................................... 22
USING THE THERMOSTAT................................................................................................................................... 23
PUSH TO TALK (PTT) MODE ................................................................................................................................ 24
LETTERBOX FUNCTION ....................................................................................................................................... 24
CHANGING THE VIDEO DOOR PHONE SETTINGS............................................................................................. 24
AUDIO SETTINGS........................................................................................................................................... 25
SELECTING THE MELODIES ......................................................................................................................... 26
BACK-LIGHTING ............................................................................................................................................ 28
DATE AND TIME ............................................................................................................................................. 28
INTERCOM: SETTING THE VIDEO DOOR PHONE NAMES .......................................................................... 29
ACCESS CONTROL .............................................................................................................................................. 30
KEY MEMORISATION PROCEDURE ............................................................................................................. 30
KEY CANCELLATION PROCEDURE .............................................................................................................. 31

3
DS1723-029
HOW TO TURN ON THE SCREEN AND ACCESS THE VARIOUS
FUNCTION
Touch anywhere on the screen or
Press the button at the bottom centre of the video door phone.
To turn off the screen, press the button of the video door phone or wait for the 60 second timeout.
RECEIVING A VIDEO DOOR PHONE CALL FROM OUTSIDE
Forward a video door phone call by pressing the call button:
The icon lights up to indicate that the call has been forwarded.
The following will appear on the video door phones in the system:
PANEL 1
Even without answering, it is possible to open the door by using either:
The button, illuminated with a green light for easy accessibility.
The button.
In correspondence to the door opening, the icon will light up on the panel.
It is also possible to turn on the stairway or garden light, using the button, open the garage gate using the
button, or even refuse the call by using the button.
To answer, touch either:
The button at the bottom, illuminated in red.
The button.
Upon the response, the button will become green, and on the panel the icon will light up to invite the
visitor to speak.
To end the conversation, touch either:
—
—
—
—
—
—

4DS1723-029
The green button.
The button.
Following a call (before starting a conversation or during the conversation), it is also possible:
To modify the image from 4:3 to 16:9 or vice-versa.
To do so, touch the icon; the 16:9 format is selected and the camera frames the upper part of the scene.
It is possible to shift the frame by scrolling the image with your finger:
The image format being used is memorised at the end of the call. Then later calls will display the video in
the last format selected.
Click on the other cameras present in the system, using the arrows to the side .
To answer it is however necessary to return to the panel camera.
Record a videoclip of the visitor by touching the record button .
Once the recording starts, the button becomes .
The counter indicates the progress of the recording. The recording can be ended by touching the button again or
because the end of the maximum recording time has been reached.
Regulate the video in terms of: luminosity, contrast, and saturation, by touching the icon .
—
—
•
•
•
•
•

5
DS1723-029
Regulate the sound intensity of the speaker by touching the icon . (If the user wishes to enable or
disable the feedback ‘click’ of the touchscreen).
Finally, during the conversation, it is possible to enable or disable the microphone to prevent the visitor from
listening by touching the button.
INTERCOM CALL
From each video door phone it is possible to call:
One of the other video door phones present in the installation.
All the other video door phones.
Cell phones with the CallMe App (if the Call Sender Device was installed).
All the video door phones of adjacent apartment in case of two-family installation.
The installer must attribute suitable names to the devices that can be called.
This operation must be carried out on each video door phone present in the installation. See the chapter
INTERCOM: SETTING THE VIDEO DOOR PHONE NAMES.
To forward an intercom call, turn on the screen and then touch the icon .
The following window will appear:
•
—
—
—
—

6DS1723-029
Select the video door phone to call by touching the corresponding line.
The following page will appear on the video door phone making the call:
The video door phone called rings and presents the following page for a maximum of 60 seconds; then the
system returns to stand-by.
Either one the users can terminate the call at any time by touching the button.
The user called must press the icon to be able to begin the conversation with the caller.

7
DS1723-029
After answering, the page on both video door phones changes as follows:
Both users can:
exclude or reactivate the microphone of his/her own video door phone to prevent the other from hearing
what is said.
end the conversation.
CONTROLLING THE CAMERA
Turn on the video door phone and touch the control camera button: .
The video door phone will present the image taken by the panel camera, also offering the possibility to open the
door or start a conversation:
PANEL 1
Use the two arrows at the top left to follow the cycle of all the cameras present.
Whenever a cycle time has been defined, the icon will have a light blue background: .
In this case, once the programmed cycle time has passed, the image of the next camera will appear
automatically.
—
—

8DS1723-029
The user can enable or disable the cycle display at any time by touching the icon.
By touching the icon it is possible to start the recording of a videoclip.
If the cyclic transition between cameras is enabled, the recording of the videoclip is considered a priority.
Therefore the passage to the next camera will take place only at the end of the recording of the videoclip,
therefore guaranteeing the user the possibility to make a full recording of what he/she desires.
VIDEO DOOR PHONE ANSWERING SERVICE
This function makes it possible to automatically record a videoclip following a call.
The action is slightly different, depending on where a message to the visitor has been enabled or not (see the
paragraph MESSAGE TO THE VISITOR).
If the message to the visitor was not enabled, the videoclip will be only video.
If the message to the visitor was enabled, the videoclip will be both audio and video, and will begin at
the end of the message and of the successive beep (if present).
The duration of the videoclip is that one set on the system by the installer.
VIDEO DOOR PHONE ANSWERING DEVICE ACTIVATION
Turn on the video door phone and activate the function by touching first the icon and then the relative
button. A check symbol will appear next to the button: .
The LED will turn green to indicate that the function has been enabled.
Following a call, the videoclip will be recorded for the set duration or until the users responds.
If the user responds, he/she will be able to record another videoclip during the conversation.
The presence of new videoclips in the memory is signalled to the user by the LED when it flashes green.
To disable the video door phone answering device, proceed in the same way as for the activation.
MESSAGE TO THE VISITOR
The panel may transmit an audio message following a call.
The options also allow the audio message to be followed by a ‘beep’ that invites the visitor to leave a message.
This function is useful for:
Improving the clients’ welcome, making reference to the name of the company and to a welcome message
like: ‘Welcome to xxx Company…’
Providing preliminary instructions to the client, like ‘Please enter and be seated in the waiting room’.
Providing information concerning opening hours: ‘Our offices are open from... to...’
RECORDING THE MESSAGE
From the ‘Configuration’ menu, accessible from the icon to the top right, select, in the ‘User’ menu,
the item ‘Outside Voice Message’:
—
—
—
—
—

9
DS1723-029
Touch ‘New Message’, the button changes into . Touch it and record the message.
The maximum length of a message is 20 seconds. The recording may be interrupted sooner by touching the
icon.
It is also possible to have the message followed by a ‘beep’ (to invite the visitor to leave a message).
ACTIVATING THE MESSAGE
Turn on the video door phone and activate the function by touching the relative button .
A check-mark will appear next to the button .
If a message has not been recorded for the visitors, pressing the key will have no effect.
When the visitor makes a call, the message will be reproduced on the panel followed by a beep, if so configured.
If the phone answering device is also enabled(1), at the end of the message (and a potential beep), and audio and
videoclip of the visitor will be recorded.
To disable the reproduction of the message, proceed in the same way as for the activation.
(1) Both functions, the reproduction of the message to the visitor and the phone answering device, can also be
activated separately. In this way the user has the utmost flexibility in using these functions.

10 DS1723-029
VIDEOCLIP CONSULTATION
All the videoclips recorded (automatically in case of alarms or the phone answering device, or manually in case of
recording during a call) are listed in the videoclip section, which can be accessed by pressing the
button. The number next to the icon indicates the videoclips that have not yet been seen(2).
The recordings to still be seen are highlighted in green, while those already seen are in black.
It is sufficient to touch the name of a videoclip to watch it.
The icon on the left facilitates the type of recording: indicates a videoclip saved in case of an alarm,
indicates a videoclip recorded by an external door unit via the video door phone answering device or manually
during a call, the icon indicates a videoclip recorded by an additional camera.
The name of the videoclip always includes:
Number of the camera by which it was recorded (from 1 to 6).
Name of the camera (which can be personalised during installation).
Date.
Time.
Suffix ‘_AL’ in case of recording following an alarm.
SAVING VIDEOCLIPS
If a videoclip should be of particular interest, it is possible to download it from the video door phone using a
microSD card.
Turn off the master video door phone display using the central button and insert a microSD card(3):
—
—
—
—
—
(2) The number is not specific only for the Alarm videoclips, but for all the videoclips recorded automatically
(alarms, phone answering device).
(3) Use a standard microSD card and not a microSDHC.

11
DS1723-029
Turn the video door phone on again and touch the icon to access the videoclip menu.
On the right a new icon will now appear to indicate the presence of the microSD card:
Touch this icon to select which videoclip you wish to save:
Then touch the icon with the symbol of the microSD card to the top right: saving will be started. While saving the
file, the icon will turn blue.
IMPORTANT: DO NOT EXPEL THE microSD CARD WHILE THE ICON IS BLUE.
When saving is complete, the icon will turn black on a white background: it is then possible to expel the microSD
card.
All the videoclips will be saved in a folder of the microSD card called ‘VIDEOCLIPS’. If this folder does not exist,
it is created automatically before saving the videoclip.
The files saved are in .avi format and can be visualised on a PC using a suitable player.

12 DS1723-029
DELETING VIDEOCLIPS
Turn the video door phone on again and touch the icon to access the videoclip menu.
When the icon next to each videoclip is touched, a square will appear.
For each videoclip to be deleted, touch the relative square and a check mark will appear.
Select the button to eliminate all the videoclips marked with a check mark.

13
DS1723-029
ACTIVATING HOME AUTOMATION COMMANDS
From the Home Page press the button to access Yokis Home Automation:
From here select the command or commands desired.
To schedule a command in one or more weekly events, go to the home automation page of the video door phone,
press , and then .
The following page will appear:
Insert the time and days the programme should be executed. If the ‘One Time Only’ option is enabled, the
programme will be executed just once and will then be disabled. If instead this option is not enabled, the scheduling
will be repeated every week on the days set.
Touch ‘Button’ to change the button to be scheduled, insert the time and days of the week when the programme
should be executed, and if it should be executed just one time. Save the settings by touching .

14 DS1723-029
This will return to the previous page. From here it is possible to enable or disable a previously configured
schedule.
To change a schedule, it is sufficient to select it and proceed in the same manner as when it was created.
To cancel a schedule, touch the picture, add a check mark next to the scheduled programme to be deleted
by touching the square and, finally, touch to confirm the deletion.

15
DS1723-029
AUDIO POST-IT
This function makes it possible to record brief audio messages on the video door phone that can later be listened
to by people returning home or to the office.
RECORDING MESSAGES
Turn on the video door phone, then access the audio POST-IT page using the or
button.
Touch the icon , to change the button in . Touch it and record the message, remembering that
the maximum duration is 20 seconds.
The recording may be interrupted sooner by touching the icon.
The LED will flash red and indicate that there is a new message.

16 DS1723-029
LISTENING TO MESSAGES
The icon indicates the number of the audio POST-ITs not yet listened to.
When touched, the list of messages appears:
new messages in green
messages already listened to in black.
Just touch one of the messages in the list and then the play icon to listen to it.
DELETING MESSAGES
Turn on the video door phone, then access the audio POST-IT page using the or
button.
When the icon next to each videoclip is touched, a square will appear.
•
•

17
DS1723-029
For each message to be deleted, touch the relative square; this will make a check mark appear, indicating that
the message has been selected.
Select the button to eliminate all the messages marked with a check mark.
AUTOMATIC DOOR OPENER
The function of the automatic door opener makes it possible automatically open the door when a call is forwarded
from outside to the apartment.
To enable the automatic door opener, turn on the video door phone and touch the icon, then
the .
Once enabled, a check mark will appear next to the button and the LED to the bottom right
will flash green, even if the video door phone is turned off.
To disable the automatic door opener, proceed in the same way as for the activation.
ALARMS
ARMING
It is possible to arm the alarm function if at least one sensor is connected.
Turn on the video door phone and arm the alarm by touching first the icon and then the relative button.
A check symbol will appear next to the button: .
The alarm LED at the top right flashes green during the potential exit time (any potential alarms during the
exit time have no effect) and become a green steady light when ended, so signal that is has been armed.
The video door phone will turn off automatically after 60 seconds from the last button pushed.

18 DS1723-029
ALARM
When a sensor that is normally closed changes status, the master video door phone indicates the following:
If an entrance time was set, for all this time the alarm LED to the top right flashes green.
Once the entrance time has expired, the alarm LED to the top right becomes a steady red.
If armed, the acoustic signal is emitted for 60 seconds.
If armed, a video recording for a set duration (max. 30 seconds) is started following a set delay (maxi. 50
seconds),
A fixed image will appear, with the option of turning off the acoustic signal (during the video recording, the
camera that is recording the videoclip is instead visualised):
In correspondence to the alarm, other signals my be sent according to the settings made. For example, it will then
be possible:
To send signals to an external siren.
To activate a specific home automation scenario (for ex: turning on the lights in the garden).
To send an alarm signal via a call sender device (optional) to the user’s smartphone (the CallMe App must be
installed and correctly configured on the mobile device).
This indication will generate a Push Notification on the smartphone, like:
IMPORTANT NOTE: It is possible to reclose and reopen the alarm sensor, thereby simulating a second alarm.
However, it is necessary to carry out this second simulation AT LEAST 90 SECONDS following the first
alarm simulation. Indeed, every time an alarm sensor is triggered, the video door phone ignores successive
alarms for about 90 seconds.
IMPORTANT: the alarm masking time on the call sending device is actually longer, equal to 10 minutes(4).
—
—
—
—
—
—
—
—
(4) Then if during the test phase the generation of multiple alarms in rapid succession is simulated, for ex. 2
minutes apart, these will all be stored in the video door phone alarm log menu, but only the first will appear
in the Smartphone alarm log. This masking time will be reduced to just 90 seconds on the new version of the
Call Sending device, so that both behaviours will be aligned.

19
DS1723-029
SIGNALLING THE ALARM HAVING BEEN ACTIVATED (ALARM MEMORY)
The memory of the alarm having been activated (one or more) is indicated to the user (upon his return home)
by the flashing red alarm LED (and also by the video memory LED flashing green, if a videoclip was
recorded).
DEACTIVATION
The deactivation of the alarm usually takes place during the entrance time(5), by touching the icon
again so that the check mark disappears.
CONSULTING THE ALARM LOG MENU
All the alarms are memorised on the master video door phone and can be consulted by touching first the
icon and then the ‘Alarms’ tab.
A list of the last alarms detected with appear, indicating the date and time:
The CallMe App can also be used to consult the alarm log menu. It will be analogous(6) :
IMPORTANT: because the call sending device, after sending an alarm notification, masks the successive
transmissions for 10 minutes, it is possible for this log to contain a smaller number of alarms
than those present on the master video door phone.
For information on how to consult the log, saving it on a microSD card and the deletion of the videoclips recorded
automatically following an alarm, see the instructions on VIDEOCLIP CONSULTATION, SAVING VIDEOCLIPS,
DELETING VIDEOCLIPS in the ‘Video door phone answering service’ section.
(5) During the entrance time it can be noted that:
- If there was no previous alarm, the LED flashes green.
- If there was a previous alarm, the LED flashes green and red alternatively (alarm memory).
(6) The title of this page can be personalised on the Call Forwarding device using the CallMe App.

20 DS1723-029
SAVING THE ALARM LOG MENU
It is possible to save the log of all the alarms on a microSD card.
Turn off the master video door phone display using the central button and insert a microSD card(7) :
Turn on the video door phone again and touch the icon first and then the ‘Alarms’ tab.
A list of the last alarms detected will appear, while to the right an icon with the symbol to save on the microSD
card appears :
Touch the icon with the symbol of the microSD card to the top right: saving will be started. During saving, the icon
will turn blue, usually for a very short time.
IMPORTANT: DO NOT EXPEL THE microSD CARD WHILE THE ICON IS BLUE.
When saving is complete, the icon will turn black on a white background: it is then possible to expel the microSD
card.
The alarm log will be stored in a Folder of the microSD card named ‘LOGS’.
If this folder does not exist, it will be automatically created before saving the file.
This is a text file that can be visualised on a PC with any text editor.
(7) Use a standard microSD card and not a microSDHC.