urmet domus FDi ipassan 2VOICE User manual

Installation manual 2-SMART panel
DOC.50-001-759.A FDI MATELEC SA Route de St Symphorien 85130 Les landes Génusson - France www.fdimatelec.com 1
1 Description of the 2VOICE system
The 2VOICE intercom system has the following characteristics:
• Capability to manage up to 4 automatic switching main door units.
• Capability to manage up to 32 columns, each one with 2 secondary call stations max.
• Capability to manage up to 128 apartment stations for each column with a single power sup-
ply unit.
• Capability to manage up to 4 apartment stations in parallel for each user.
• Only 2 non-polarized wires in each system part.
• No local power supply needed for call stations or apartment stations.
• Wiring for derived branches made with 4-user distributor or directly in in/out mode on de-
vices terminal pins.
• Short circuit protection on derived branches (use the 4-user distributor Ref. 1083/55).
• Electric lock activation from all apartment stations; programmable activation time and mode
(free/secret).
• Activation of a second lock (driveway) from all apartment stations.
• A concierge switchboard can be connected to the system.
2 Description of the 2-SMART panel
The door entry panel is made in ZAMAC material and can be with a black or grey frame. They are
composed of a graphical screen 4.3’’ and a built-in 2-SMART reader which will be the gateway
between the iPassan controller and the 2VOICE panel.
A built-in color camera is included with a sensor for automatic lighting.
A built-in sensor which detects if the door stays opened.
They are DDA compliant with a built-in audio system for the hearing impaired.

DOC.50-001-759.A FDI MATELEC SA Route de St Symphorien 85130 Les landes Génusson - France www.fdimatelec.com 2
3 Installation of the embedded box
1- Front panel Zamac
2- Screws: type Torx – vandal resistant
3- Video camera
4- Color screen TFT 4.3’’
5- Scrolling button and 4th button for concierge call or change the language
6- 12 buttons keypad
7- Built-in 2-SMART reader for iPassan
The embedded box is similar for any 2-SMART panel.
Note: Check the regulation for the height of the installation for disabled people

4 Settings
DOC.50-001-759.A FDI MATELEC SA Route de St Symphorien 85130 Les landes Génusson - France www.fdimatelec.com 3
The 2-SMART panel has been developed to be managed by ipassan Manager. By connection it to the
ipassan controller, you are able to manage all the intercom functionnalities with the software and
have a HLI for lift management.
4.1 ADMINISTRATOR CODE:
When you first start the panel, you have to change the administrator code to have access to the
settings. The code like 0000 or 1111 (same numbers) or 1234, 123456 are not authorized for a better
security. The code must be composed of 4 digits.
It is possible to change this code with the RAZ connector closed to the connector of the panel. You
should change the position of the jumper (PSU on ON and using mode) then put it back on the for-
mer position. You will then be invited to choose another code.
4.2 PROGRAMING OF THE NAME:
To enter in programing mode, press A twice then enter the administrator code and press B or press
the button OK.
You manage the names with the iPassan Manager software.
4.3 SCREEN MONITORING
Use the arrows to move up and down
Press OK to enter in the menu
Press the last button to go back

DOC.50-001-759.A FDI MATELEC SA Route de St Symphorien 85130 Les landes Génusson - France www.fdimatelec.com 4
1-Quit
2-Administration
1-Quit
2-Change password
3-Time and date
3-Maintenance
1-Quit
2-Logs
3-Events
4-Settings
1-Quit
2-Audio/Video
1-Quit
2-General
3-Volume audio messages
3-Sensor
4- LEDs camera ON
5-RAZ
6-General info
7-PSU Info.
4-Settings
1-Quit
2-Panel settings
3- Codes clavier internes
5-Settings
1-Keypads sound
5 Information on union harmonisation legislation
FDI MATELEC, as a manufacturer, declares under its sole responsibility that the product IPassan
complies with the relevant
Union harmonization legislation:
RED 2014/53/EU - DEEE 2012/19/EU
This declaration is fully available on request at [e-mail] or on our web site www.fdi-
matelec.com under this product part number.
6 Product end of life management
Warning: risk of explosion if the battery CR2032 is replaced by a battery which is not adapted
Do not throw this product away with household waste. Please use your local recycling collection
points to make sure this product is properly recycled.