urmet domus IPerCom 1160/3 System manual

DS 1160-007 LBT 20493
Mod.
1160
CITOFONO VIVAVOCE IP
IP HAND-FREE DOOR PHONE
INTERPHONE MAINS-LIBRES IP
INTERFONO MANOS LIBRES IP
SPRECHANLAGE MIT FREISPRECHSYSTEM IP
IP HANDSFREE DEURTELEFOON
Sch./Ref.1160/3
LIBRETTO DI INSTALLAZIONE
INSTALLATION HANDBOOK
NOTICE D’INSTALLATION
MANUAL DE INSTALACIÓN
INSTALLATIONSANLEITUNG
INSTALLATIEHANDLEIDING

6DS1160-007
ENGLISH
The Ref. 1160/3 is an IP device dedicated to the Ipercom system.
For trouble-free operation, the device requires a LAN/POE-type connection.
DESCRIPTION OF COMPONENTS
1
2
1. Ipercom LAN connector with POE power supply (DOORPHONE POE PORT)
2. 12-way connector for connecting the door phone to optional devices for obtaining the following
functions:
• panic alarm
• call repetition
• floor call
• Yokis device activation.
WIRE DESCRIPTION FOR SYSTEM CONNECTIONS
Colour Name Description
Yellow PANIC Panic alarm
Green X1 Button
Blue GT Button common and
White Y1 Button
Grey - Not used
Colour Name Description
Grey - Not used
Brown S- Call repetition
Orange S+
Purple FC Floor call

7
DS1160-007
WIRING INSTRUCTIONS
RJ45 Ethernet Cable
The Ipercom system has been designed to work with the EIA/TIA 568B standard.
Plug the cable into one of the RJ45 connectors with the Urmet logo.
Insert the wire in its guide, according to the provided colour code (Standard T568B).
8
1
Wire
No. Cable colour
1 White-Orange
2 Orange
3 White-Green
4 Blue
Wire
No. Cable colour
5 White-Blue
6 Green
7 White-Brown
8 Brown
Grey sheath
Cut the cables so that they protrude from the guide by about 5 mm, insert the guide in its plug and crimp
with the specially provided tool.
Plug
8
1
~ 5 mm
8
1
Make sure that the grey sheath stays inside the plug.
This type of connection will NOT guarantee double insulation.
INSTALLATION
WITH FLUSH-MOUNTED CASING MOD. 503
Install flush-mounting box at the height indicated in the drawing below.
Fix the bracket to the mounting box.
Box Mod. 503
Metal bracket
1,55 m
n° 2 M3,5 x 19 mm
included
Connect.
Fix the door phone to the bracket.
1
2
•
•
•

8DS1160-007
WITH FLUSH-MOUNTED CASING Ø 60 MM
Install flush-mounting box at the height indicated.
Remove the plastic base from the door phone unit and fix the base to the wall as shown in the drawing here
below.
1,55 m
n° 1 2,9 x 13 mm
countersunk screw
Box Ø 60 mm
n° 1 screw and screw
anchor included
Connect.
Fix the door phone to its plastic base.
1
DISTANCES, SECTIONS CABLES AND TECH SPECS
Type of connection Max distance Min - max cross section
Call to floor level 30 m 0,5 - 1 mm2
Panic Alarm 30 m 0,5 - 1 mm2
Call repeating 30 m 0,5 - 1 mm2
Yokis devices 10 m 0,5 - 1 mm2
LAN 100 m CAT5e (#)
(#) To ensure longest-range door phone operation, the cable must be a class 5e device and the twisted
pairs’ cross section must be AWG24.
The maximum resistance of the individual wires must not exceed 10ohm/100m.
The cable must be up to the following standards:
- EIA/TIA 568-B.2 or EIA/TIA 568-C.2
- EN50288 3-1
- IEC 61156-5
The connection between the door phone and POE switch must be ensured by a single cable without any
extra patch cords.
POE input voltage: ......................................................................................................................... 48-54 V
Max consumption @ 48 V:....................................................................................................................125 mA
Operating Temperature: ...................................................................................................................-5 ÷ 45°C
Maximum current X1/GT or Y1/GT contacts: .........................................................................50 mA - 12 Vdc

9
DS1160-007
Connection of a E2BPP module to the door phone for the centralisation of lights and rollers
SD541-4004
MVR500ER
OFNLBP
Roller
MVR500ER
OFNLBP
ANTENNA
GT
X1
Y1
R1 R1
R1
R1
R1 R1
Roller
Max 10 m
After suitably programming the Yokis devices, it will be possible:
to activate the centralised closing of the rollers with a button (for example: );
a second button (for example: ) will activate the turning off of the lights.
For more information on YOKIS products, please visit www.yokis.com
–
–

DS 1160-007 LBT 20493
Area tecnica
servizio clienti +39 011.23.39.810
http://www.urmet.com
e-mail: [email protected]
MADE IN CHINA
URMET S.p.A.
10154 TORINO (ITALY)
VIA BOLOGNA 188/C
Telef. +39 011.24.00.000 (RIC. AUT.)
Fax [phone] - 323