urmet domus 2Voice 1083/12 Operating instructions

Key code programming guide
1083/12 -1083/15 -1083/16

Administering key codes
First it is necessary to log in to the entry panel.
On the entry panel keypad press 99999 and you will see this screen –
If the password entry has been successful you will see this screen –
Enter 1000 (the default password) then press
Use the and buttons to select DOOR OPENER and press
If you see this screen (with a different
SERVICE CODE
) it
means that the default password has been changed.
Make a note of the SERVICE CODE (or take a picture) and
e-mail [email protected] including your contact
details and you will be contacted with information
detailing how to reset the password.

Adding a new code
€
You see this screen –
•
Repeatedly press to exit from the programming menus
Use the and buttons to select NEW and press
Enter a code (4 digits from 0001 to 9999) and press

Modifying a code
Repeatedly press to exit from the programming menus
MODIFY
NEW
Use the and buttons to select MODIFY and press
Use and to select the code to be modified and press .
2580
3690
1479
Use
the
button
to
delete the existing code.
Enter the new code and press

Deleting a code
‚
ƒ
Repeatedly press to exit from the programming menus
Use the and buttons to select DELETE and press
DELETE
NEW
Use and to select the code to be deleted and press .
.
2580
3690
1479
Press to delete the code

Deleting all codes
„
…
Repeatedly press to exit from the programming menus
Use the and buttons to select DELETE ALL and press
DELETE
ALL
NEW
Press to delete all codes

URMET COMMUNICATION
AND SECURITY UK LTD
Urban H
ive, Skyline 120,
Avenue West, Great Notley,
Essex. CM77 7AA
Tel [phone]
Fax [phone]
www.urmet.co.uk
[email protected]