urmet domus ATLANTICO 1702/1 User manual

sec.4b
−−−−
1
BIBUS 2nd Ed. VOP - Technical Manual
APARTMENT
VIDEO DOOR PHONE
STATIONS
Download from:
www.urmetdomus.com
Technical Manuals area
SECTION 4B
(REV.B)

CONTENTS BIBUS II^ Ed. VOP SYSTEM - Section 4B
SECTION 4B CONTENTS
BIBUS II^ Ed. VOP SYSTEM
I
−−−−
sec.4b BIBUS 2nd Ed. VOP - Technical Manual
Sec. Pag.
APARTMENT VIDEO DOOR PHONE STATIONS
ATLANTICO BLACK AND WHITE VIDEO DOOR PHONE
SPECIFICATIONS................................................................................................................................................................................4b................3
TECHNICAL SPECIFICATIONS..........................................................................................................................................................4b ................3
ATLANTICO COLOUR VIDEO DOOR PHONE Ref. 1702/40
SPECIFICATIONS................................................................................................................................................................................4b................4
TECHNICAL SPECIFICATIONS..........................................................................................................................................................4b ................4
ATLANTICO VIDEO DOOR PHONE
ATLANTICO BRACKETS FOR BIBUS II^ ED. VOP SYSTEMS Ref 1202/954 ...................................................................................4b ................5
Bracket terminals..............................................................................................................................................................................4b................5
Technical specifications....................................................................................................................................................................4b................5
INSTALLATION....................................................................................................................................................................................4b ................5
Wall-mounted version.......................................................................................................................................................................4b................5
Tabletop version...............................................................................................................................................................................4b................5
PROGRAMMING..................................................................................................................................................................................4b................6
Ringer programming.........................................................................................................................................................................4b................6
Parallel video door phone installation...............................................................................................................................................4b................6
Auto-on.............................................................................................................................................................................................4b................6
COLOURED MASK KIT .......................................................................................................................................................................4b................6
ARTICO VIDEO DOOR PHONE Ref. 1705/1
SPECIFICATIONS................................................................................................................................................................................4b................7
TECHNICAL FEATURES.....................................................................................................................................................................4b ................7
ARTICO BRACKETS FOR BIBUS II^ ED. VOP Ref. 1705/954...........................................................................................................4b................8
Bracket terminals..............................................................................................................................................................................4b................8
Technical specifications....................................................................................................................................................................4b................8
INSTALLATION....................................................................................................................................................................................4b ................8
PROGRAMMING..................................................................................................................................................................................4b................8
Ringer programming.........................................................................................................................................................................4b................8
Parallel monitor installation...............................................................................................................................................................4b................8
Auto-on.............................................................................................................................................................................................4b................9
FRONT GLASS REPLACEMENT........................................................................................................................................................4b ................9
SCAITEL BLACK AND WHITE VIDEO MODULE Ref. 1732/1
SPECIFICATIONS................................................................................................................................................................................4b............. 10
Technical specifications....................................................................................................................................................................4b............. 10
SCAITELCOLOURVIDEO MODULE Ref. 1732/41
SPECIFICATIONS................................................................................................................................................................................4b............. 10
Technical specifications....................................................................................................................................................................4b............. 10
SCAITEL VIDEO MODULE
VIDEO MODULE BRACKET Ref. 1732/957........................................................................................................................................4b............. 11
Bracket terminals..............................................................................................................................................................................4b............. 11
INSTALLATION....................................................................................................................................................................................4b ............. 11
Wall-mounted version.......................................................................................................................................................................4b............. 11
TABLE MOUNTED KIT FOR SCAITEL MONITOR Ref. 1732/56........................................................................................................4b............. 11
.

sec.4b
−−−−
3
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual
ATLANTICO BLACK AND WHITE VIDEO DOOR
PHONE
The Atlantico video door phone implements an electronic call system
and can be used in Bibus 2nd Ed. VOP systems when equipped with
the specific bracket.
The call volume (to dedicated speaker) can be adjusted in linear
fashion and muted.
The video door phone is easy to install because no masonry work
is needed and all connections are made to the bracket on which the
video door phone will eventually be fastened. The handset connection
is particularly ergonomic. A simple telephone plug is used.
The door opener button by the side of the handset is lit up and green
when the monitor is on.
The Atlantico video door phone has innovative simple, essential
designed fashioned by Michele De Lucchi and is available in 3
version.
The video door phone as available in this version:
• White colour Ref. 1702/1
• Anthracite colour Ref. 1702/41
• High tech grey colour Ref. 1702/42
The front mask colour can be changed with the kit Ref. 1702/50 to suit
the video door phone for all architectural contexts.
SPECIFICATIONS
The main characteristics of the video door phone are:
• Flat 4” black and white video module.
• Adjustable and mutable call volume. The adjustment wheel appears
red when the volume is muted.
NOTE: when volume is set to “MUTE” the video door phone will not
ring but the video module will light up.
• Door opener button is lit up and green when video module is on.
•
Servicebuttons (and ) foractivating,forexample,supplementary
electrical locks, staircase lights, monitor auto-on function, etc.
• Adjustable brightness and contrast.
218 mm 80 mm
220 mm
Door opener button
Call volume control and adjustment
/
Mute function
Auxiliar
y
buttons
Contrast adjustment
Brightness adjustment
TECHNICAL SPECIFICATIONS
Power voltage: 16 ÷ 18,5Vdc
Working uptake: max 0,35A
Stand-by: 0A
Working power: max 6,5W
CCIR version Vertical frequency: 50Hz ± 2Hz
Horizontal frequency: 15625 ± 300Hz
Video signal: 1Vpp 75 Ωnominal
1Vpp. -6dB minimum
Kinescope: 4” flat 13mm neck
Phosphorous: P45
Screen size: 81 x 59mm
Geometric distorsion: vertical 5% max.
horizontal 5% max.
barrel 10% max.
Brightness: 170cd/m2max. setting
X-rays: none
Switch-on delay: 4 sec. max.
Transmitting capsule: electret microphone
Receiving capsule: 45Ωspeaker
Button voltage: 24Veff. max.
Button current: 1,2Aeff.
Operating temperature range: -5° ÷ +50°C
Max. humidity: 90%RH
ATLANTICO BLACK AND WHITE VIDEO DOOR PHONE
SPECIFICATIONS - TECHNICAL SPECIFICATIONS - ATLANTICO BRACKETS
ATLANTICO BLACK AND WHITE VIDEO DOOR PHONE

4
−−−−
sec.4b
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual
ATLANTICO COLOUR VIDEO DOOR PHONE
Ref. 1702/40
The Atlantico video door phone is a colour apartment station which
can be used in Bibus 2nd Ed. VOP systems when equipped with the
specific bracket.
As the black and white version, also this model has adjustable call tone
volume and muting functions.
The video door phone is easy to install because no masonry work
is needed and all connections are made to the bracket on which the
video door phone will eventually be fastened. The handset connection
is particularly ergonomic. A simple telephone plug is used.
The video door phone is only white but the front part can be customised
by replacing the standard frame (blue) with one of the five frames from
the Ref. 1702/50 kit.
SPECIFICATIONS
The main characteristics of the video door phone are:
• Flat 4” LCD colour module.
• Adjustable and mutable call volume. The adjustment wheel appears
red when the volume is muted.
NOTE: when volume is set to “MUTE” the video door phone will not
ring but the video module will light up.
• Door opener button is lit up and green when video module is on.
• Servicebuttons ( and )foractivating,forexample,supplementary
electrical locks, staircase lights, video door phone auto-on function,
etc.
• Adjustable brightness and contrast.
TECHNICAL SPECIFICATIONS
Power voltage: 16 ÷18.5Vdc
Working uptake: max. 0.35A
Stand-by: 0A
Working power: max. 6.5W
CCIR version: Vertical frequency: 50Hz ±2Hz
Horizontal frequency: 15625 ±300Hz
Video signal: 1Vpp 75 Ωnominal
1Vpp -6 dB minimum
LCD: 4”back-lit
Screen size: 81 X59mm
Resolution: 380H x250V pixel
Colour system: PAL
Switch-on delay: 4 sec. max.
Transmitting capsule: electret microphone
Receiving capsule: 45Ωspeaker
Button voltage: 24Veff. max.
Button current: 1.2Aeff
Operating temperature range: -5° ÷+50°C
Max. humidity: 90% RH
ATLANTICO COLOUR VIDEO DOOR PHONE Ref. 1702/40
SPECIFICATIONS -TECHNICAL SPECIFICATIONS
218 mm 80 mm
220 mm
Door opener button
Call volume control and adjustment
/
Mute function
Auxiliary buttons
Colour adjustment
Brightness adjustment
ATLANTICO COLOUR VIDEO DOOR PHONE Ref. 1702/40

sec.4b
−−−−
5
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual
ATLANTICO BRACKETS FOR BIBUS II^ ED.
VOP SYSTEMS Ref. 1202/954
Atlantico video door phone are provided without fastening bracket
which must be purchased separately.
• Bracket for Bibus II^ ed. VOP systems Ref. 1202/954
The following functions are offered by using brackets Ref. 1202/954 in
combination with Atlantico video door phones:
• Non-polarised video input.
• Video connection with floor distributor Ref. 1074/54.
• In/out video connection.
• Possibility of connecting an additional video door phone.
• Privacy function.
• 6 two-tone ringers (the installer can select the door phone call and
floor call tones).
BRACKET TERMINALS
VPI VOP signal input terminals
VPU VOP signal output terminals (for in-out or parallel video door
phone connection)
L1
}
Door phone bus
L2
C1
}
Floor call
C2
Important: Never fit the video terminal resistors.
TECHNICAL SPECIFICATIONS
Max. VPI uptake with video door phone fitted: 450mA
Stand-by uptake (L1, L2): 1.6mA max.
Temperature: -5÷ +45°C
INSTALLATION
The device can be wall-mounted (on a bracket) or rested on a
horizontal surface by using the specific tabletop stand in addition to the
bracket.
WALL-MOUNTED VERSION
1) Arrange the duct so that it ends in correspondence with one of the
input holes.
2) Fasten the bracket to the wall at the height from the floor shown by
means of the four screws.
3) Set the switch (on back of video door phone) to position “B” before
fitting the video door phone.
4) Connect the wires to the specific terminals
5) Extract the retainer hook A by inserting the tip of a screwdriver and
pulling the hook downwards.
6) Fasten the video door phone to the bracket as shown in the
figure.
7) Fasten the video door phone by pushing the retainer hook A
upwards.
TABLETOP VERSION
Atlantico can be table-mounted using the specific kit Ref. 1702/92
containing: one tabletop stand, one socket and one cord.
Proceed as follows:
1) Insert the wire from the junction box through the rear hole of the
support and fasten it using the U-bolt and the screw provided.
2) Connect the junction box wires to the specific terminals on the
bracket.
3) Set the switch (on the video door phone rear) on position B.
4) Extract the retainer hook A from the video door phone.
5) Fit the video door phone on the bracket and fasten it by pushing
the hook Aup.
6) Connect the system wires to the corresponding socket terminals.
NOTE: consider the following correspondence between terminals
when using the table mounting kit in Bibus 2nd edition VOP
systems:
Table mounting kit Bracket
Ref. 1702/92 Ref. 1202/954
R1 →VPI
R2 →VPI
X1 →L1
X2 →L2
Y1 →C1
Y2 →C2
Important: The table mounting kit Ref. 1702/92 may be used
for installing video door phones without in/out connection to other
devices.
A
B
A
1,55 m
Bracket
A
B
ATLANTICO VIDEO DOOR PHONE
ATLANTICO BRACKETS FOR BIBUS II^ ED. VOP SYSTEMS Ref. 1202/954
INSTALLATION
A
B
ATLANTICO VIDEO DOOR PHONE

6
−−−−
sec.4b
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual
PROGRAMMING
The procedure for programming video door phone user codes is the same
as for Bibus 2nd edition door phones. Go to the apartment, press the door
opener button and pick up the video door phone handset after setting up
the video door phone booking sequence on the call station or concierge
switchboard.
Release the video door opener button and hang up.
The door phone will sound to indicate that it has been programmed.
RINGER PROGRAMMING
1. Release the video door phone from the bracket.
2. Move jumper W1 from position “a” to position “b”.
3. Re-fasten the video door phone.
4. Pressthe auxiliary service button. The door phone tone will change
each time the button is pressed. Go to the next step once the
ringer has been selected.
5. Press the concierge call button. The floor call ringer will change
each time the button is pressed. Go to the next step once the
ringer has been selected.
6. Release the video door phone from the bracket.
7. Return jumper W1 to position “a”.
8. Re-fasten the video door phone.
PARALLEL VIDEO DOOR PHONE INSTALLATION
A configuration of up to two video door phones in parallel can be
obtained without the addition of local power units (refer to the VOP
1074/20 video power unit instruction booklet for wiring). A door phone
with additional self-powered ringer may be added to the two video door
phones in parallel.
Operation is described below. Both video door phones (and the door
phoneconnectedin parallel where relevant)ringwhen a call isreceived
but only the “master” video door phone (i.e. the one connected directly
to the column or to the VOP extension) will light up.
The picture can be seen on the video door phone which is off from this
time until the programmed call station off-hook time-out (typically 40
seconds) by pressing the concierge call button without picking up the
handset.
The handset of either of the two video door phones can be picked up
to establish a communication with the door unit and definitely capture
the picture.
NOTE: the floor call button must be connected to a single video door
phone.
AUTO-ON
Video or audio/video auto-on from the MAIN station 1 is possible. With
the door phone standing by, press the concierge call button without
picking up the handset. Nothing will happen if the main station 1 has
either a conversation in progress or is busy; otherwise, the video door
phone will ring and the video door phone will light up. The door can be
opened and a voice connection can be established by picking up the
handset within the off-hook time-out (typically 40 seconds).
COLOURED MASK KIT
The video door phone can be customised by replacing the front mask
and add-on name tag with those contained in the Ref. 1702/50 kit.
The kit contains masks and cards of the following colours:
• Yellow
• Pink
• Grey
• Green
• Blue
Other media, such as photographs or wall paper, can be used to
customise the video door phone instead of the Ref. 1702/50 kit. In this
case, use one of the frames provided as a template to trace the exact
installation profile.
(a)
(b)
4 mm slot screwdriver
rotary movement
A
B
CD
3
1
2
E
ATLANTICO VIDEO DOOR PHONE
PROGRAMMING -COLOURED MASK KIT
ATLANTICO VIDEO DOOR PHONE

sec.4b
−−−−
7
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual
ARTICO VIDEO DOOR PHONE Ref. 1705/1
Artico offers the most modern technology applied to picture display and
the best quality/price ratio. These features make the video door phone
suitable for normal communication needs and security applications in
video door phone systems.
Thanks to the use of a functional flat 4” screen which reduces the
protrusion from the wall, Artico can be installed on the wall without the
need for masonry work.
Connection of this video door phone are also simple and rapid, thanks
to the terminal board arranged on the dedicated bracket.
SPECIFICATIONS
The main characteristics of the video door phone are:
• Flat 4” LCD black and withe video module.
• Adjustable and mutable call volume. The adjustment wheel appears
red when the volume is muted.
• Door opener button dedicated.
• One service button ( ) which can be used, for example, to switch
on the staircase lights or open an additional lock.
• One button for calling the concierge station and auto-on ( ):
Door unit: pick up the handset and press the button.
Auto-on: press the button without picking up the handset.
• Two potentiometers for adjusting picture brightness and contrast.
A Door opener button.
B1 Auxiliary button: used for special functions.
B2 Auxiliary button: used for calling the concierge station and
auto-on.
C Contrast adjustment control.
D Brightness adjustment control.
E Call volume control and adjustment: turn the knob as far as it
will go (red part visible) to mute the call tone (“MUTE” function).
TECHNICAL FEATURES
Power voltage: 16 ÷ 18,5Vdc
Working uptake: max 0,6A
Working power: max 10W
CCIR Version Vertical frequency: 50Hz ± 2Hz
Horizontal frequency: 15625 ± 300Hz
Video signal: 1Vpp 75Ωnominal
1Vpp -6dB minimum
Kinescope: 4” tipo FLAT 20mm neck
Phosphorous: P45
Geometric distorsion: vertical 5% max
horizontal 5% max
barrel 10% max
Brightness: >100cd/m2max. setting
X-rays: none
Switch-on delay: 7sec. max
Transmitting capsule: electret microphone
Receiving capsule: speaker 45Ω
Button voltage: 24Veff. max
Button current: 1,2Aeff
Operating temperature range: -5° ÷ +50°C
Max. humidity: 90% UR
ATLANTICO VIDEO DOOR PHONE
ATLANTICO VIDEO DOOR PHONE Ref. 1705/1
SPECIFICATIONS - TECHNICAL FEATURES
Ref. 1705/1
MUTEMEDMAX
200 mm
241 mm
83 mm
A
B1
B2
C ED

8
−−−−
sec.4b
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual
ARTICO BRACKETS FOR BIBUS II^ ED. VOP
Ref. 1705/954
Artico video door phone is provided without fastening bracket which
must be purchased separately.
• Bracket for Bibus II^ ed. VOP systems Ref. 1705/954
The following functions are offered by using Ref. 1705/954 brackets in
combination with Artico monitors:
• Non-polarised video input.
• Video connection with floor distributor Ref. 1074/54.
• In/out video connection.
• Possibility of connecting an additional monitor.
• Privacy function.
• 6 two-tone ringers (the installer can select the door phone call and
floor call tones).
BRACKET TERMINALS
VPI VOP signal input terminals
VPU VOP signal output terminals (for in-out or parallel monitor
connection)
L1, L2 Door phone bus
C1, C2 Floor call
Important: Never fit the video terminal resistors.
TECHNICAL SPECIFICATIONS
Max. VPI uptake with monitor fitted: 700mA
Stand-by uptake (L1, L2): 1.6mA max.
Temperature: -5 /+45°C
INSTALLATION
Arrange the duct so that it ends in correspondence with the input hole
on the bracket and proceed as follows:
1 Fasten the bracket to the wall at the height from the floor shown by
means of the four screws.
2 Connect the wires to the specific terminals.
3 Set the switch (on back of monitor) to position “B” before fitting the
monitor.
4 Extract the retainer hook Aby inserting the tip of a screwdriver and
pulling the hook downwards.
5 Fasten the monitor to the bracket.
6 Fasten the monitor by pushing the retainer hook Aupwards.
PROGRAMMING
The procedure for programming video door phone user codes is the
same as for Bibus 2nd edition door phones. Go to the apartment, press
the door opener button and pick up the video door phone handset after
setting up the video door phone booking sequence on the call station
or concierge switchboard.
Release the video door opener button and hang up.
The door phone will sound to indicate that it has been programmed.
RINGER PROGRAMMING
1. Release the monitor from the bracket.
2. Move jumper W1 from position “a” to position “b”.
3. Re-fasten the monitor.
4. Pressthe auxiliary service button. The door phone tone will change
each time the button is pressed. Go to the next step once the
ringer has been selected.
5. Press the concierge call button. The floor call ringer will change
each time the button is pressed. Go to the next step once the
ringer has been selected.
6. Release the monitor from the bracket.
7. Return jumper W1 to position “a”.
8. Re-fasten the monitor.
PARALLEL MONITOR INSTALLATION
A configuration of up to two video door phones in parallel can be
obtained without the addition of local power units (refer to the VOP
Ref. 1074/20 video power unit instruction booklet for wiring). A door
phone with additional self-powered ringer may be added to the two
video door phones in parallel.
ATLANTICO VIDEO DOOR PHONE Ref. 1705/1
ARTICO BRACKETS FOR BIBUS II^ ED. VOP Ref. 1705/954 -INSTALLATION
PROGRAMMING
ATLANTICO VIDEO DOOR PHONE Ref. 1705/1
A
B
A
12345
ON
12
ON
DIP
Ref. 1705/1
1,55 m
(a)
(b)

sec.4b
−−−−
9
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual
Operation is described below. Both video door phones (and the
door phone connected in parallel where relevant) ring when a call is
received but only the “master” monitor (i.e. the one connected directly
to the column or to the VOP extension) will light up.
The picture can be seen on the monitor which is off from this time until
the programmed call station off-hook time-out (typically 40 seconds)
by pressing the concierge call button without picking up the handset.
The handset of either of the two video door phones can be picked up
to establish a communication with the door unit and definitely capture
the picture.
NOTE: the floor call button must be connected to a single video door
phone.
AUTO-ON
Video or audio/video auto-on from the MAIN station 1 is possible. With
the door phone standing by, press the concierge call button without
picking up the handset. Nothing will happen if the main station 1 has
either a conversation in progress or is busy; otherwise, the video door
phone will ring and the monitor will light up. The door can be opened
and a voice connection can be established by picking up the handset
within the off-hook time-out (typically 40 seconds).
FRONT GLASS REPLACEMENT
The video door phone can be customised by replacing the front glass.
The following colours are available:
•Smoky grey Ref. 1705/101
(pre-fitted on the video door phone)
•Blue Ref. 1705/102
ATLANTICO VIDEO DOOR PHONE
ATLANTICO VIDEO DOOR PHONE Ref. 1705/1
FRONT GLASS REPLACEMENT
Ref. 1705/1
A B
C D

10
−−−−
sec.4b
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual
SCAITEL BLACK AND WHITE VIDEO MODULE
Ref. 1732/1
The Scaitel video module Ref. 1732/1 has a 4” flat screen black
and white monitor and can be used in combination with switchboards
Ref. 1072/42 so that the operator can see visitors.
SPECIFICATIONS
Available in matte white plastic (ABS) only, the device is equipped with
two potentiometers for adjusting picture brightness ( ) and contrast
( ).
The video module can be installed to the wall by means of a bracket
with connector and terminal board.
The monitor can be table-mounted using a specific transformation kit.
TECHNICAL SPECIFICATIONS
Power: 16÷18.5Vdc
Consumption: 0.35A max. working 0mA stand-by
Power: 6.5W max. working
CCIR version: Vertical frequency: 50Hz ±2Hz
Horizontal frequency: 15625 ±400Hz
Resolution: 400 lines in middle of screen
Video input: 1Vpp-75Ohm nominal
1Vpp -6dB min.
Kinescope: 4” flat
Phosphorous: P45
Screen size: 81 x59mm
Geometric distortion: vertical 8% max. -horizontal 12% max.
Brightness: 170cd/m2max. setting
Working temperature range: -5+45°C
Storage temperature range: -20 +60°C
Humidity: 90 %RH max.
167 mm
220 mm
56 mm
Contrast adjustment
Bri
g
htness ad
j
ustment
SCAITEL COLOUR VIDEO MODULE
Ref. 1732/41
The Scaitel colour video module Ref. 1732/41 can be exclusively
combined to a switchboard so that concierge personnel can see
visitors.
SPECIFICATIONS
Available in matte white plastic (ABS) only, the device is equipped with
two potentiometers for adjusting picture brightness ( ) and colour
( ).
The monitor (basic or with add-on modules) can be table-mounted
using a specific transformation kit.
TECHNICAL SPECIFICATIONS
Power voltage: 16÷18.5Vdc
Working uptake working: 0.35A max.
stand-by: 0mA
Working Power: 6.5W max
CCIR version: Vertical frequency: 50Hz ±2Hz
Horizontal frequency: 15625 ±400Hz
Resolution: 480Hx234V
Video input: 1Vpp-75Ohm nominal 1Vpp -6dB min.
Kinescope: 4” TFT
Colour system: PAL
Screen size: 81 x59mm
Working temperature range: -5 +45°C
Storage temperature range: -20 +60°C
Humidity: 90%RH max
167 mm
220 mm
56 mm
Colour adjustment
Bri
g
htness ad
j
ustment
SCAITEL BLACK AND WHITE VIDEO MODULE Ref. 1732/1
SPECIFICATIONS
SCAITEL COLOUR VIDEO MODULE Ref. 1732/41
SPECIFICATIONS
SCAITEL BLACK AND WHITE VIDEO MODULE
SCAITEL COLOUR VIDEO MODULE
Ref. 1732/41
Ref. 1732/1

sec.4b
−−−−
11
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual
VIDEO MODULE BRACKET Ref. 1732/957
Note: the bracket can be used either with colour and black and white
video door phone.
BRACKET TERMINALS
R1 Monitor power negative
R2 Monitor power positive
RD Parallel monitor power *
0V Control signal ground
CV Video module control signal (from switchboard)
AS Additional video module video signal negative
BS Additional video module video signal positive
AO Video signal negative passing output
BO Video signal positive passing output
AI Input video signal negative
BI Input video signal positive
* System configuration must include a suitably dimensioned power
unit.
INSTALLATION
WALL-MOUNTED VERSION
Proceed as follows to fasten the video module only:
• Arrange the duct so that it ends in correspondence with the input
hole.
• Fasten the bracket to the wall at the height from the floor shown by
means of bolts.
• Connect the wires to the specific terminals.
• Set the correct distance between bracket and camera with the dip
switches.
• Extract the stop bolt A.
• Fasten the monitor to the bracket and lock the device by pushing the
bolt “A” inwards.
Switchboard
connection wire CN2
0-200m 700-1000m450-700m200-450m
A
Ref. 1732/957
1,55 m
SCAITEL VIDEO MODULE
TABLE MOUNTED KIT FOR SCAITEL MONITOR
Ref. 1732/56
Use the tabletop transformation kit Ref. 1732/56.
Proceed as follows:
•Insert the four adhesive rubbers provided in the housings under the
base of the table mounting stand.
•Break the base of only one of the three wire passage areas shown
in Fig. 2.
•Insert the junction box wire in the hole and fasten it with the U-bolt
and screw (α) provided to the table.
•Fasten the bracket by means of the specific screws. (Fig. 1).
•Connect the junction box wires to the specific terminals on the
bracket.
NOTE: consider the following correspondence between terminals for
using the table mounting kit with bracket Ref. 1732/957:
Table mounting kit Scaitel bracket for
Ref. 1732/56 Bibus 2nd edition VOP systems
Ref. 1732/957
R1 →R1
R2 →R2
RD →RD
0V →0V
CV →CV
1 →AS
2 →BS
R3 →AO
CA →BO
A →AI
B →BI
• Extract the stop bolt A from the monitor.
• Fasten the monitor to the bracket and lock it by pushing the bolt A
inwards.
• Connect the system wires to the corresponding socket terminals.
SCAITEL VIDEO MODULE
VIDEO MODULE BRACKET Ref. 1732/957 - INSTALLATION
TABLE MOUNTED KIT FOR SCAITEL MONITOR Ref. 1732/56
Ref. 1732/957
Ref. 1732/56
α
α
α
Fig. 1
Aa
a
a
Fig. 2

12
−−−−
sec.4b
APARTMENT VIDEO DOOR PHONE STATION
BIBUS 2nd Ed. VOP - Technical Manual