urmet domus IPerCom User manual

7
System technical manual
for the installer

2 MT124-032D
Contents MT124-032D Version 1.4.0
1 Introduction............................................................................................................................................... 6
2 IPerCom devices and functions offered by the system ............................................................................. 7
2.1 Call Module 1060/12-13-17-18 ......................................................................................................... 8
2.2 Entry Panel 1060/71-74-75................................................................................................................ 8
2.3 Entry Panel 1060/21 .......................................................................................................................... 8
2.4 MAX 1717/31-32-33-34-41................................................................................................................ 8
2.5 Audio Door Phone 1160/3................................................................................................................. 9
2.6 Relay actuator 1060/84 v. 2.07 ......................................................................................................... 9
2.7 Relay actuator 1060/84 v. 3.04 ......................................................................................................... 9
2.8 Key Reader 1060/82 .......................................................................................................................... 9
2.9 Switchboard 1060/41 ........................................................................................................................ 9
2.10 IPerCom Clock Module 1060/85...................................................................................................... 10
2.11 Gateway IPerCom-2Voice 1083/59 ................................................................................................. 10
2.12 Private Call Module 1060/22........................................................................................................... 10
3 Basic concepts ......................................................................................................................................... 11
3.1 Topology .......................................................................................................................................... 11
3.2 Topological path and topological group.......................................................................................... 12
3.3 Applications of the concepts of topological path and topological group ....................................... 13
3.3.1 Automatic display of residents in the address book of Call Modules ..................................... 13
3.3.2 Propagation of contacts in address book of monitors MAX and Audio Door Phones............. 14
3.3.3 Propagation of activation rules ............................................................................................... 14
3.3.4 Practical example of application of the topological group concept........................................ 14
3.3.5 Resident access (with key code and door code) to doors/gates of the system ...................... 15
3.3.6 Competence Switchboards...................................................................................................... 15
3.3.7 Automatic loading of Call Modules, Door Speaker Units and RTSP cameras in the room
address book for auto-on function.......................................................................................... 15
3.3.8 Practical example of application of the topological path concept.......................................... 16
3.3.9 Summary table......................................................................................................................... 16
3.4 Main and secondary Call Modules .................................................................................................. 17
3.5 Security and configuration distribution........................................................................................... 17
4 System installation .................................................................................................................................. 18
4.1 Minimum requirements for the installation of IPerCom................................................................. 18

MT124-032D 3
4.2 IP network structure........................................................................................................................ 19
4.3 Maximum distances and sections cables ........................................................................................ 20
5 Device firmware upgrade ........................................................................................................................ 21
6 System configuration............................................................................................................................... 23
6.1 The configuration menu on the MAX monitor................................................................................. 24
6.2 The configurator .............................................................................................................................. 31
6.2.1 Configurator installation on Android tablets........................................................................... 36
6.3 System first configuration ............................................................................................................... 37
6.3.1 Date and time setting .............................................................................................................. 38
6.3.2 Creation of a new configuration: definition of the system topology ...................................... 41
6.3.2.1 Villa Kit (one-household) systems ....................................................................................... 46
6.3.2.2 Single Stair systems ............................................................................................................. 47
6.3.2.3 Multiple Stairs systems........................................................................................................ 48
6.3.2.4 Multi Block systems............................................................................................................. 49
6.3.3 Adding devices......................................................................................................................... 50
6.3.3.1 Mode 1: installer uses only MAX monitors for the system configuration........................... 51
6.3.3.2 Mode 1.1: The installer creates the configuration in the laboratory on the MAX
monitor/PC/Android tablet and adds the devices to the configuration via the MAX
monitor................................................................................................................................ 57
6.3.3.3 Mode 2: The installer creates the configuration in the laboratory on the MAX
monitor/PC/Android tablet but adds the devices via Android tablet ................................. 58
6.3.3.4 Mode 3: The installer creates the configuration in the laboratory on the MAX
monitor/PC/Android tablet and adds at the same time the devices that are not yet
installed ............................................................................................................................... 61
6.3.3.5 Mode 3.1: The installer creates the configuration in the laboratory on the MAX
monitor/PC/Android tablet and adds at the same time the previously installed devices .. 62
6.3.3.6 Mode 4: One MAX monitor with configurator in "Acquisition" mode................................ 63
6.3.3.7 Adding a Gateway IPerCom-2Voice on a stair node............................................................ 66
6.3.4 Contacts................................................................................................................................... 70
6.3.4.1 Allowing calls from Audio Door Phones and/or Call Modules to MAX monitors and
Audio Door Phones.............................................................................................................. 71
6.3.4.2 Allowing calls from MAX monitors, Audio Door Phones and/or Call Modules to
Switchboards ....................................................................................................................... 79
6.3.4.3 Auto-on function on Door Speaker Units, Call Modules and RTSP cameras from MAX
monitors outside their competence.................................................................................... 83
6.3.4.4 Contacts in system with Gateway IPerCom-2Voice ............................................................ 86

4 MT124-032D
6.3.5 Activations ............................................................................................................................... 89
6.3.5.1 Activation for events on Entry Panel................................................................................... 93
6.3.5.2 Activation for events on Call Module .................................................................................. 97
6.3.5.3 Key Reader activations ........................................................................................................ 99
6.3.5.4 Activations for topological events ..................................................................................... 101
6.3.5.5 Activations for topological events with 2Voice audio/video Door Phones....................... 111
6.3.5.6 Automation events: input/output association.................................................................. 113
6.3.6 User management ................................................................................................................. 139
6.3.6.1 Residents ........................................................................................................................... 140
6.3.6.2 Not residents ..................................................................................................................... 144
6.3.6.3 Groups ............................................................................................................................... 149
6.3.6.4 Switchboards ..................................................................................................................... 151
6.3.7 Access control........................................................................................................................ 153
6.3.7.1 Access profiles ................................................................................................................... 155
6.3.7.2 Time Profiles ...................................................................................................................... 159
6.3.7.3 Holidays ............................................................................................................................. 164
6.3.7.4 Door groups ....................................................................................................................... 168
6.3.7.5 Door profiles...................................................................................................................... 171
6.3.7.6 Trade.................................................................................................................................. 175
6.3.8 System parameters................................................................................................................ 177
6.3.8.1 Selection of the addressing type ....................................................................................... 179
6.3.9 Setting of call forwarding ...................................................................................................... 182
6.3.10 Search function...................................................................................................................... 184
6.3.11 Configuration distribution ..................................................................................................... 187
6.3.12 Exporting the configuration to an SD card ............................................................................ 190
6.3.13 Securing the system............................................................................................................... 191
6.4 Changing the system configuration............................................................................................... 193
6.4.1 Unlocking a system................................................................................................................ 194
6.4.2 How to change the configuration.......................................................................................... 195
6.4.3 Changing the administrator password .................................................................................. 198
6.4.4 Restoring the factory settings ............................................................................................... 198
6.4.4.1 MAX Monitor factory reset................................................................................................ 199
6.4.4.2 Factory reset of Audio Door Phones.................................................................................. 200
6.4.4.3 Factory reset of Call Modules............................................................................................ 201

MT124-032D 5
6.4.4.4 Factory reset of the Door Speaker Units ........................................................................... 204
6.4.4.5 Factory reset of IPerCom 2Voice Gateway........................................................................ 205
6.4.4.6 Factory reset of Entry Panel 1060/21................................................................................ 206
6.4.4.7 Factory reset of Private Call Module 1060/22................................................................... 207
APPENDIX A: Configuration parameters of IPerCom devices........................................................................ 208
Call Module 1060/12-13-17-18 ................................................................................................................. 208
Entry Panel 1060/71-74-75 ....................................................................................................................... 212
Entry Panel 1060/21 .................................................................................................................................. 216
MAX 1717/31-32-33-34-41........................................................................................................................ 219
Audio Door Phone 1160/3....................................................................................................................... 220
Relay actuator 1060/84 v. 3.04/v. 02.07 ................................................................................................... 222
Key Reader 1060/82 .................................................................................................................................. 225
Switchboard 1060/41 ................................................................................................................................ 227
IperCom Clock Module 1060/85................................................................................................................ 228
IPerCom-2Voice Gateway 1083/59 ........................................................................................................... 229
Private Call Module 1060/22..................................................................................................................... 230
RTSP camera .............................................................................................................................................. 232
APPENDIX B: Differences of functions between 2Voice and IPerCom audio/video Door Phones................ 234
APPENDIX C: Differences of functions between 2Voice and IPerCom devices with IPerCom Switchboard. 235
APPENDIX D: IPerCom priority calls............................................................................................................... 235
APPENDIX E: Template of the list of devices installed in the system............................................................ 236

6 MT124-032D
1Introduction
IPerCom is an IP video intercom system with the following features:
1. it does not have single vulnerabilities, since IPerCom does not require the presence of a server to
implement the main functions;
2. it combines the advantages of a server system, since from a single device it is possible to configure
all the other devices of the system (without accessing from one device at a time) to the advantages
of a serverless
1
system, and therefore of a distributed logic system, the operation of which does
not depend on a single device;
3. the remote technical support benefits from the fact that the configuration of the system is in a
single small file (usually < 1 MB), which can be sent to the assistance by any means and can also be
edited remotely; this is a great advantage compared to other systems, where it is necessary to
back up the database, which can reach over 100 MB and to be analysed requires a physical server
on which to import the backup configuration;
4. it can work on an existing network with other already installed devices;
5. may be configured using IPerCom Configurator application (released for Android), IPerCom Installer
Tools software (released for MS Windows) and system monitor;
6. it provides two security levels: system administrator and installer, each with their own password;
7. all communications between devices are encrypted using a proprietary algorithm to prevent attacks
to the system;
8. the installer does not need to have knowledge of IP networks;
9. it supports small and medium sized systems.
The Technical System Installer's Manual describes how to the configure an IperCom system. Refer to the
respective use and installation manuals for more information on the single devices.
1
Unlike the other serverless systems on the market, IPerCom can be fully configured without having to access all the
devices of the system; this is one of the typical advantages of a server-based system that is maintained on IPerCom.

MT124-032D 7
2IPerCom devices and functions offered by the system
IPerCom system has the following features:
It supports the devices indicated below
2
:
oCall module 1060/12-13-17-18,
oEntry panel 1060/71-74-75,
oEntry panel 1060/21,
oMAX monitor 1717/31-32-33-34-41,
oAudio door phone 1160/3,
oRelay actuator 1060/84,
oKey reader 1060/82,
oSwitchboard 1060/41,
oIPerCom clock module 1060/85,
oGateway IPerCom-2Voice 1083/59,
oPrivate Call Module 1060/22,
oRTSP cameras.
Available services:
oAudio/video communication, intercom included,
oAuto insertion on Call Modules, Entry Panels, Private Call Modules and RTSP cameras via
MAX monitor,
oCentralized firmware update via IPerUpgrade application for MS Windows (available for
download on the website www.urmet.com),
oAdd to IPerCom system 2Voice risers by means of Gateway IPerCom-2Voice 1083/59,
oOutput activation and alarm sending by means of Relay Actuator 1060/84 inputs,
oSwitchboard services:
Day mode to take calls,
Night mode,
Stand-by with diversion on other switchboards,
Door opening,
Visual and acoustic signalling of alarms with history of received and silenced alarms,
Activation of Relay actuator 1060/84 outputs,
Tampering alarms,
Panic alarms,
Output activations,
CCTV function,
Displaying of alarms, calls and door opening services by maps.
oAccess control service,
oOutputs activation and alarms generation from 1060/84 relay actuator inputs,
oGeneration of alarms and activation of outputs through system events,
oCall forwarding to Android and iOS (Apple) Smartphones/tablets.
2
IPerCom supports a maximum of 1000 IP devices on the entire system, including a maximum of 16 devices between
MAX monitors and Audio door phones per apartment and a maximum of 10 Switchboards.

8 MT124-032D
2.1 Call Module 1060/12-13-17-18
The Call Module 1060/12-13-17-18 is a calling station with display.
The graphic display allows easy access to the address book of the contacts to be called.
The Call Module can independently control two different outputs. The first is used to open a pedestrian
door, the second to control the gate opening control unit of a possible garage gate.
The device allows access to pedestrian door and driveway also by typing a user code on the alphanumeric
keypad. In this case, the anti-robbery function can be also managed to send a silent alarm to the concierge
when the door is opened.
A dedicated button can be used to send the call to the possible competence Switchboard present in the
system.
The Call Module integrates an access control proximity key reader.
2.2 Entry Panel 1060/71-74-75
The Entry Panel 1060/71-74-75 is a calling station with 2 push buttons (only 1 for 1060/71).
The push buttons can be extended to a maximum of 32 using appropriate expansion modules.
The Entry Panel can independently control two different outputs. The first is used to open a pedestrian
door, the second to control the gate opening control unit of a possible garage gate.
2.3 Entry Panel 1060/21
The Entry Panel 1060/21 is a vandal-proof calling station with a single push button with weather-proof
zama front.
It can independently control two different outputs. The first is used to open a pedestrian door, the second
to control the gate opening control unit of a possible driveway.
The Entry Panel integrates a proximity key reader for access control only for the pedestrian door.
2.4 MAX 1717/31-32-33-34-41
The MAX 1717/31-32-33-34-41 is an Monitor with touch display.
In addition to allowing normal video door phone functions, the MAX monitor can also be used to forward
calls to a smartphone using the CallMe app (for Android and iOS). The MAX monitor can be used to
configure the IPerCom system.

MT124-032D 9
2.5 Audio Door Phone 1160/3
The Audio Door Phone 1160/3 is a device with hands-free speaker function. It is provided with a door
opening button and four buttons for optional functions, two of which are configurable for use in the
IPerCom system.
2.6 Relay actuator 1060/84 v. 2.07
The Relay Actuator 1060/84 is an IP device, which can be used to activate two electrical loads via double
exchange relay capable of working in bistable or monostable timed mode. The activation of the relays in
monostable or bistable mode occurs through events generated by Call Module, Entry Panel, Private Call
Module, Key Reader, Audio Door Phone and MAX monitor or locally through the inputs of the Relay
Actuator itself.
2.7 Relay actuator 1060/84 v. 3.04
The Relay Actuator 1060/84 is an IP device, which can be used to activate two electrical loads via double
exchange relay capable of working in bistable or monostable timed mode. The activation of the relays in
monostable or bistable mode occurs through events generated by Call Module, Entry Panel, Private Call
Module and MAX monitor or locally through the inputs of the Relay Actuator itself. Furthermore, the inputs
of the same Relay Actuator can activate one or more outputs of several Relay Actuators and generate an
alarm to the concierge as a function of appropriate programming.
2.8 Key Reader 1060/82
The Key Reader 1060/82 is an IP device used to read proximity keys. The device is equipped with a relay
output to control an electric lock. It also has an input available for local door opening.
2.9 Switchboard 1060/41
The IPerCom system implements the concierge function using a PC and the specific Switchboard application
software. It is possible to connect the door phone 1060/41 (via a USB port of the PC and the mini-jack audio
connectors).

10 MT124-032D
2.10 IPerCom Clock Module 1060/85
The IPerCom Clock Module 1060/85 is a device which provides the time to an IPerCom system if no MAX
monitors are installed in it.
The minimum duration of the battery is 3 years.
2.11 Gateway IPerCom-2Voice 1083/59
The Gateway IPerCom-2Voice 1083/59 allows the 2Voice system to be interfaced with the IPerCom system:
in detail, it allows the addition of a riser column (stair) of 2Voice audio / video apartment stations to an
IPerCom system.
In this way, it is possible to create systems with an IPerCom common backbone on street side and 2Voice
riser columns with only 2 non-polarized wires. Each riser column (associated with a gateway) can manage a
maximum of 128 apartment stations, 127 users, 2 secondary door units on 2 backbones. It is therefore
possible to have a number of main door units (Call Modules and Entry Panels) and switchboards (IPerCom)
higher than the known limits of the 2Voice system (for further details, follow instructions in the 2Voice
technical manual).
For device configuration details, follow instructions in the "Adding a Gateway IPerCom-2Voice on a stair
node" and in "APPENDIX A: Configuration parameters of IPerCom devices" paragraphs.
2.12 Private Call Module 1060/22
The Private Call Module 1060/22 is a one-push button call station to be installed directly outside the main
door of the apartment.
It can only call the MAX monitors or Audio Door Phones of the apartment to which the call station is
associated.
MAX monitors can make auto-on on the Private Call Module.