US Robotics 56K PCI FAXMODEM - QUICK REV 1 User manual

56K PCI Faxmodem
Quick Installation Guide
Guide d'installation rapide
Installationsanleitung
Guida per l'installazione rapida
Guía breve de instalación
Manual de Instalação Rápida
#R24.0572.00
rev 1 11/05

56K PCI Faxmodem
Quick Installation Guide
Guide d'installation rapide
Installationsanleitung
Guida per l'installazione rapida
Beknopteinstallatiegids
Guía breve de instalación
Manual de Instalação Rápida

U.S. Robotics Corporation
935 National Parkway
Schaumburg, Illinois
60173-5157
USA
No part of this documentation may be reproduced in any form or by any means or used to
make any derivative work (such as a translation, transformation, or adaptation) without
written permission from U.S. Robotics Corporation. U.S. Robotics Corporation reserves the
right to revise this documentation ad to make changes in the products and/or content of
this document from time to time without obligation to provide notification of such revision
or change. U.S. Robotics Corporation provides this documentation without warranty of any
kind, either implied or expressed, including, but not limited to, implied warranties of mer-
chantability and fitness for a particular purpose. If there is any software on removable
media described in this documentation, it is furnished under a license agreement included
with the product as a separate document, in the hard copy documentation, or on the remov-
able media in a directory named LICENSE. If you are unable to locate a copy, please contact
USRobotics and a copy will be provided to you.
UNITED STATES GOVERNMENT LEGEND If you are a United States government agency, then
this documentation and the software described herein are provided to you subject to the
following:
All technical data and computer software are commercial in nature and developed solely at
private expense. Software is delivered as “Commercial Computer Software” as defined in
DFARS 252.227-7014 (June 1995) or as a “commercial item” as defined in FAR 2.101(a) and
as such is provided with only such rights as are provided in USRobotics standard commer-
cial license for the Software. Technical data is provided with limited rights only as provided
in DFAR 252.227-7015 (Nov 1995) or FAR 52.227-14 (June 1987) whichever is applicable. You
agree not to remove or deface any portion of any legend provided on any licensed program
or documentation contained in, or delivered to you in conjunction with, this Administrator
Guide.
Copyright © 2005 U.S. Robotics Corporation. All rights reserved. U.S. Robotics and the
USRobotics logo are registered trademarks of U.S. Robotics Corporation. Other product
names are for identification purposes only and may be trademarks of their respective com-
panies. Product specifications subject to change without notice.

1
Contents
English Installation Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Instructions d'installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Deutschsprachige Installationsanleitung . . . . . . . . . . . . . . . . . . . . . . . . . 25
Istruzioni di installazione in italiano . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Instrucciones de instalación. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49
Instruções de Instalação em Português . . . . . . . . . . . . . . . . . . . . . . . . . . 61

2

1
English Installation Instructions
Prepare for installation.
CAUTION: To avoid the risk of electrical shock, make sure your computer and
all peripheral devices are turned off and unplugged. Disconnect all telephone
cables from any existing modems before opening the computer’s cover. Touch
an unpainted metal area of your computer’s case to ground yourself, which
protects your equipment from electrostatic discharge.
NOTE: USRobotics recommends uninstalling any other modems that are
installed in your system and unplugging all telephone cords connected to these
modems. Refer to your previous modem's documentation for instructions.
Write your new USRobotics modem's serial number in the box below. The serial number is
located on the white bar code sticker on the modem and on the modem's box. If you ever
need to call our Technical Support department, you will need this number and your Model
Number to receive assistance.
Install the Modem.
Step 1: Physically install the modem in your computer.
Turn off your computer and all peripheral devices.
Unplug your computer and remove the compu-
ter’s cover. Remove the expansion slot cover at
the back of an empty PCI expansion slot. PCI slots
are usually white in color. The slot cover is on the
back of your computer and covers an opening on
your computer’s case. The slot cover could be
held in place with a screw or a clip.
Insert the modem into the PCI slot. You may need
to rock the modem back and forth while pressing
down firmly to properly seat the modem in the
PCI slot.
The modem’s metal bracket will cover the open-
ing on the back of the computer. If applicable,
secure the modem with the screw or clip you removed. Replace the computer’s cover.
Model Number Serial Number
5671

2
Step 2: Connect the modem to an analogue phone line.
Plug one end of the provided phone cord into the jack on the modem labeled . Plug the
other end into an analogue phone wall jack.
CAUTION: The USRobotics 56K PCI Faxmodem requires a standard analogue
telephone line. Do not connect your modem to a digital telephone line. Digital
lines are commonly used in office buildings and hotels. If you are unsure
whether your line is analogue or digital, ask your network administrator or your
local telephone company.
Step 3: Install the modem drivers.
Driver installation varies by operating system. Follow the instructions below for your version
of Windows.
Windows XP
NOTE: If at any time during the installation you are prompted to select the loca-
tion of your installation drivers, select the following location on the Installation
CD-ROM (assuming D: is your CD-ROM drive):
D:\2000_XP
1. Reconnect your computer and peripherals and turn your computer on.
2. Log into Windows.
3. When the Found New Hardware Wizard appears, select No, not this time and click
Next.
4. Insert the Installation CD-ROM into your CD-ROM drive.
5. When a Hardware Installation warning appears, click Continue Anyway*.
6. When Windows is finished installing the drivers, click Finish.
Windows Me
NOTE: If at any time during the installation you are prompted to select the loca-
tion of your installation drivers, select the following location on the Installation
CD-ROM (assuming D: is your CD-ROM drive):
D:\
1. Reconnect your computer and peripherals and turn your computer on.
2. Log into Windows.
3. When the Add New Hardware Wizard appears, insert the Installation CD-ROM into your
CD-ROM drive.
4. Install the U.S. Robotics V.92 PCI Modem Enumerator as follows:
A. Select Automatic search for a better driver (Recommended) and click Next.
* USRobotics has thoroughly tested in conjunction with the supported hardware and has verified compatibility with Win-
dows XP and 2000.

3
B. When the wizard is finished installing the drivers, click Finish.
The wizard then begins a search for drivers for the U.S. Robotics V.92 PCI Modem.
5. Install the U.S. Robotics V.92 PCI Modem as follows.
A. Verify that Automatic search for a better driver (Recommended) is selected and
click Next.
B. When Windows is finished installing the drivers, click Finish.
Windows 2000
NOTE: If at any time during the installation you are prompted to select the loca-
tion of your installation drivers, select the following location on the Installation
CD-ROM (assuming D: is your CD-ROM drive):
D:\2000_XP
1. Reconnect your computer and peripherals and turn your computer on.
2. Log into Windows.
3. When the Found New Hardware Wizard appears, click Next, then insert the Installation
CD-ROM into your CD-ROM drive.
4. Select Search for a suitable driver for my device (Recommended) and click Next.
5. Select CD-ROM drives and click Next.
6. When Windows locates the correct drivers for the PCI Simple Communications Control-
ler, click Next.
If a “Digital Signature Not Found” screen appears, click Yes to continue.**
7. When Windows is finished installing the drivers, click Finish.
Windows 98
NOTE: If at any time during the installation you are prompted to select the loca-
tion of your installation drivers, select the following location on the Installation
CD-ROM (assuming D: is your CD-ROM drive):
D:\
1. Reconnect your computer and peripherals and turn your computer on.
2. Log into Windows.
3. When the Add New Hardware Wizard appears, insert the Installation CD-ROM into your
CD-ROM drive and click Next.
4. Install the U.S. Robotics V.92 PCI Modem Enumerator as follows:
A. Select Search for the best driver for your device (Recommended) and click Next.
B. Select CD-ROM and click Next.
C. When the wizard locates the correct drivers for the U.S. Robotics V.92 PCI Modem
Enumerator, click Next.
D. When the wizard is finished installing the drivers, click Finish.
** USRobotics has thoroughly tested in conjunction with the supported hardware and has verified compatibility with Win-
dows XP and 2000.

4
The wizard then begins a search for drivers for the U.S. Robotics V.92 PCI Modem.
5. Install the U.S. Robotics V.92 PCI Modem as follows.
A. Click Next.
B. Select Search for the best driver for your device (Recommended) and click Next.
C. Select CD-ROM and click Next.
D. When Windows locates the correct drivers for the U.S. Robotics V.92 PCI Modem,
click Next.
E. When Windows is finished installing the drivers, click Finish.
Windows 95
NOTE: If at any time during the installation you are prompted to select the loca-
tion of your installation drivers, select the following location on the Installation
CD-ROM (assuming D: is your CD-ROM drive):
D:\
1. Reconnect your computer and peripherals and turn your computer on.
2. Insert the Installation CD-ROM into your CD-ROM drive before Windows opens. You
need to install both the U.S. Robotics V.92 PCI Modem Enumerator and the U.S. Robot-
ics V.92 PCI Modem.
3. When the New Hardware Found or Update Device Driver Wizard appears, follow the on-
screen instructions.
Install the Software.
Insert the Installation CD-ROM into your CD-ROM drive. The Installation CD-ROM window
should automatically appear.
If your Installation CD-ROM is already in the drive, and the Installation CD-ROM interface is
not displayed, eject and reinsert the Installation CD-ROM. If the CD-ROM interface still does
not appear, click Windows Start and then Run. Type D:\setup.exe in the “Run” dialog box. (If
your CD-ROM drive uses a different letter, type that letter in place of “D.”)
Install the Instant Update software.
The Instant Update software automatically notifies you of any updates to your modem’s
code.
To Install the Instant Update Software:
1. At the Installation CD-ROM interface, click Software.
2. Select Instant Update and click Install.
3. Follow the on-screen instructions to install the Instant Update software.
Install the Internet Call Notification software.
Internet Call Notification enables the V.92 feature, “Modem On Hold,” which allows you to
suspend your Internet connection when there is an inbound telephone call. If you are con-
necting to a service provider that supports V.92, you will receive a message informing you of

5
an incoming call. In addition, if you subscribe to Caller ID service, the number of the incom-
ing call will be displayed in the computer's message window. You will then have the option
to accept the call or to ignore it. If you choose to accept the call, another message will
appear notifying you of the length of time that the provider's system will wait on hold before
the data connection is terminated. You can then return to the connection when the call is
completed without losing the connection.
If you are connecting to a service provider that does not support V.92, you will receive a
message informing you of an incoming call. You will then have the option to accept the call
or to ignore it. If you choose to accept the call, your data connection will be terminated.
To Install the Internet Call Notification software:
1. At the Installation CD-ROM interface, click Software.
2. Select USRobotics Internet Call Notification and click Install.
3. Follow the on-screen instructions to complete the installation of the software.
Register your modem.
When you register your modem online, USRobotics will use your information to:
• Inform you of future product support notices, alerts, and changes to our support offer-
ings.
• Invite you to participate in market research, new product definition studies, and beta
test programs.
• Invite you to participate in promotional campaigns.
We respect our customers’ privacy. USRobotics will not sell or provide any personal informa-
tion that identifies you or any individual to any outside source.
To register your modem:
1. Connect to your Internet service provider.
2. At the Installation CD-ROM interface, click Support.
3. Select Product Registration and click the link to register your modem.
You can also register your modem online at
http://www.usr.com/productreg
Uninstallation Instructions
Step 1: Uninstall the modem drivers.
Windows XP
1. Click Windows Start and then Control Panel.
2. Double-click Add or Remove Programs.
3. Select U.S. Robotics V.92 PCI Modem.
4. Click Change/Remove.

6
Windows 2000
1. Click Windows Start, Settings, and then Control Panel.
2. Double-click Add/Remove Programs.
3. Select U.S. Robotics V.92 PCI Modem.
4. Click Change/Remove.
Windows 95/98/Me
1. Click Windows Start, Settings, and then Control Panel.
2. Double-click Add/Remove Programs.
3. Select U.S. Robotics V.92 PCI Modem.
4. Click Add/Remove.
Step 2: Finish removing the modem from the computer.
CAUTION: To avoid the risk of electrical shock, make sure your computer and
all peripheral devices are turned off and unplugged. Disconnect all telephone
cables from any existing modems before opening the computer’s cover. Touch
an unpainted metal area of your computer’s case to ground yourself, which
protects your equipment from electrostatic discharge.
Turn off your computer and all peripheral devices. Unplug your computer and disconnect all
telephone cables from any modems. Remove the computer’s cover. Remove the modem
from the PCI expansion slot.
Troubleshooting
If you have any difficulty with your modem, first make sure that it was installed cor-
rectly.
1. Make sure that your modem is physically installed correctly in your computer. With
your computer turned off, you will need to press the modem in firmly so that it is
seated properly in its slot. When the modem is installed correctly, you will no longer
see any part of the gold edge. See Step 1 in this guide for complete instructions. If your
modem still does not work, turn off your computer, remove the modem, and reinstall it
in another PCI slot.
2. Next, make sure that the drivers have been installed correctly. Follow the instructions
for your operating system:
Windows XP
A. Click Windows Start and then Control Panel.
B. Double-click System.
If you do not see the System icon, make sure you are in Classic View by clicking
Switch to Classic View on the upper left side of the window.
C. Click the Hardware tab and then the Device Manager button.
D. Click to expand Modems.

7
You should see U.S. Robotics V.92 PCI Modem listed. This means that the instal-
lation was a success.
If your modem is not listed, shut down and restart your computer. If it is still not
listed, go to the next Troubleshooting category in this guide, “My computer isn’t
recognising my modem.” or uninstall your modem and reinstall it.
Windows 2000
A. Click Windows Start, Settings, and then Control Panel.
B. Double-click System.
C. Click the Hardware tab and then the Device Manager button.
D. Click to expand Modems.
You should see U.S. Robotics V.92 PCI Modem listed. This means that the instal-
lation was a success.
If your modem is not listed, shut down and restart your computer. If it is still not
listed, go to the next Troubleshooting category in this guide, “My computer isn’t
recognising my modem.” or uninstall your modem and reinstall it.
Windows 95/98/Me
A. Click Windows Start, Settings, and then Control Panel.
B. Double-click the System icon.
C. Click the Device Manager tab, then click to expand HSFMODEM.
You should see U.S. Robotics V.92 PCI Modem Enumerator listed.
D. Click to expand Modem or Modems.
You should see U.S. Robotics V.92 PCI Modem listed. This means that the instal-
lation was a success.
If your modem is not listed, shut down and restart your computer. If it is still not
listed, go to the next Troubleshooting category in this guide, “My computer isn’t
recognising my modem.” or uninstall your modem and reinstall it.
My computer isn’t recognising my modem.
If Plug and Play fails to find the modem as new hardware, you need to check the following:
1. With your computer turned off, confirm that the modem is firmly seated in the PCI slot.
The modem should sit evenly in the slot with no part of the gold edge showing.
2. With your computer turned off, try installing the modem in another PCI slot.
3. Check your computer manual to make sure that the PCI slot is configured properly.
My modem seemed to install correctly but doesn’t work or is performing erratically.
Possible solution:
Hardware resources are not properly assigned to your modem. Although PCI devices can
share IRQs, there are devices on the market which do not share IRQs properly. If the modem
has been assigned to an IRQ with one of these devices, the modem may perform erratically.

8
Windows XP
1. Click Windows Start and then Control Panel.
2. Double-click System.
If you do not see the System icon, make sure you are in Classic View. Click Switch to
Classic View on the upper left side of the window.
3. Click the Hardware tab and then the Device Manager button.
4. Click to expand Modems and look for U.S. Robotics V.92 PCI Modem.
If a yellow exclamation point appears over the modem’s description, your modem is in
conflict with another device.
With your computer turned off, try installing the modem in another PCI slot. Check your
computer manual to make sure that the PCI slot is configured properly.
If an available IRQ does not exist, you may need to remove, disable, or relocate
another device. Refer to that device’s documentation for more information about
removing, disabling, or relocating it.
Windows 2000
1. Right-click the My Computer icon on your desktop.
2. Click Properties, click the Hardware tab, then click Device Manager.
3. In the list of devices, double-click the Modems category and look for your modem’s
description.
If a yellow exclamation point appears over the modem’s description, your modem is in
conflict with another device. With your computer turned off, try installing the modem
in another PCI slot. Check your computer manual to make sure that the PCI slot is con-
figured properly.
If an available IRQ does not exist, you may need to remove, disable, or relocate
another device. Refer to that device’s documentation for more information about
removing, disabling, or relocating it.
Windows 95/98/Me
1. Right-click the My Computer icon on your desktop.
2. Click Properties and then click the Device Manager tab.
3. In the list of devices, double-click the Modem or Modems category and look for your
modem’s description.
If a yellow exclamation point appears over your modem’s description, your modem is
in conflict with another device. With your computer turned off, try installing the
modem in another PCI slot. Check your computer manual to make sure that the PCI slot
is configured properly.
If an available IRQ does not exist, you may need to remove, disable, or relocate
another device. Refer to that device’s documentation for more information about
removing, disabling, or relocating it.

9
My software isn’t recognising my modem.
Possible solution:
Your communications software may not function properly if you have more than one version
of the software installed, you are using an older version, or you have more than one commu-
nications application installed on your system. We highly recommend using the communica-
tions software provided with your modem on the Installation CD-ROM.
Possible solution:
Your software’s COM port settings may be incorrect. There should be a place in the Setup
section of your software that addresses port settings. Make sure the software’s port set-
tings match those for your modem. To check which COM port your modem is using, check
the settings as described in the beginning of the “Troubleshooting” section of this guide.
Check your communication software’s documentation for instructions on adjusting the port
settings in your software.
Possible solution:
If you are using software which uses a Windows modem description and you had a previous
modem installed, you may need to update your software’s setting to reflect the use of the
USRobotics V.92 PCI Modem.
Possible solution:
If you are using Windows-based software which has its own list of modems to select from,
you may need to update the software for use with this modem. For best operation, select
Standard Modem or Hayes Compatible from the list of manufacturers. You may also need to
select the modem’s COM port. To check which COM port your modem is using, check the set-
tings as described in the beginning of the “Troubleshooting” section of this guide.
Possible solution:
Windows 2000/XP
Make sure you have uninstalled all previously installed modems from your system.
Windows 95/98/Me
If you are using Dial-Up Networking, it may not be configured correctly. Check your configu-
ration and make sure that you have your new USRobotics modem selected.
1. Double-click My Computer,
2. Windows Me users only: double-click Control Panel.
3. Double-click Dial-Up Networking, right-click the connection you are trying to use, and
click Properties.

10
My modem won’t dial out or doesn’t answer incoming calls.
For Both Dialing and Answering Problems
Possible solution:
You may have a bad phone cord connection to your modem. The phone cord should be
plugged into the jack on the modem and into the wall jack. Use the phone cord included
in your modem’s box, if possible.
Possible solution:
You may have devices between the modem and the phone jack. There should be no line
splitters, fax machines, or other devices between the modem and the wall jack.
Office Users
Possible solution:
You may have plugged your modem’s phone cord into a digital line. This will cause perma-
nent damage to your modem. Contact the department responsible for your phone system if
you are unsure whether or not your phone line is digital.
Possible solution:
If your phone system requires dialing “9” to access an outside line, be sure to add “9”
before the number you are dialing.
Voice Mail Users
Possible solution:
If you have voice mail provided by your local phone company, your dial tone may be altered
when messages are waiting. Retrieve your voice mail to restore your normal dial tone.
My modem sounds like it’s trying to connect to another modem but fails.
Possible solution:
You may have a poor connection. All calls are routed differently, so try placing the call again.
My modem isn’t achieving a 56K Internet connection.
NOTE: The V.92 and V.90 protocols allow for download speeds of up to 56K and
the V.92 protocol adds upload speeds of up to 48K, but line conditions may
affect the actual speeds during a given connection. Due to unusual telephone
line configurations, some users will not be able to take full advantage of V.92 or
V.90 technology at this time.
In order to achieve a V.92 or V.90 connection:
• The server you’re dialing into must support and provide a digital V.92 or V.90 signal.
Your ISP can provide you with a list of dial-up connections and information on what
those connections currently support.

11
• The telephone line between your ISP and your modem must be capable of supporting
a 56K connection and contain only one digital-to-analogue conversion. The 56K signal
from your ISP begins as a digital signal. Somewhere between the ISP and your modem,
there will be a digital-to-analogue signal conversion so that your modem can receive
the data. There must be no more than one digital-to-analogue signal conversion in the
path from your ISP to your modem. If more than one analogue-to-digital conversion
occurs, your connect speeds will default to V.34 (33.6 Kbps). There may also be impair-
ments on the local lines between your ISP and your modem. These impairments can
prevent or limit V.92 or V.90 connection speeds. All telephone calls are routed differ-
ently, so you should try making your connection several times. One way to test this is
to dial into a long distance location. Long distance lines are often much clearer than
local lines. It is important to note that telephone companies are constantly upgrading
their systems. Lines that do not support 56K today may support 56K in the near future.
• Your modem must be connecting to a V.92 or V.90 server. A pair of 56K modems will
not connect to each other at 56K speeds.
Support Resources
If you have not fixed your problem after trying the suggestions in the “Troubleshooting” sec-
tion, you can receive additional help via one of these convenient resources:
World Wide Web
The USRobotics Web site contains useful product information, documents, downloads, and
updated FAQs.
http://www.usr.com/support
Are You Still Having Problems?
1. Contact the dealer who sold you the modem.
The dealer may be able to troubleshoot the problem over the phone or may request
that you bring the modem back to the store for service.
2. Contact the USRobotics Technical Support Department.
Questions about USRobotics modems can be answered by technical support special-
ists.
Country Webmail Voice Support Hours
Austria www.usr.com/emailsupport/de 07 110 900 116 9:00 A.M.–17:00 P.M., M–F
Belgium (Flemish) www.usr.com/emailsupport/bn [phone]:00 A.M.–17:00 P.M., M–F
Belgium (French) www.usr.com/emailsupport/be [phone]:00 A.M.–17:00 P.M., M–F
Czech Republic www.usr.com/emailsupport/cz
Denmark www.usr.com/emailsupport/ea [phone]:00 A.M.–17:00 P.M., M–F
Finland www.usr.com/emailsupport/ea [phone]:00 A.M.–18:00 P.M., M–F

12
For regulatory information and warranty information, see the
User Guide on the USRobotics
Installation CD-ROM.
France www.usr.com/emailsupport/fr 082 507 0693 9:00 A.M.–17:00 P.M., M–F
Germany www.usr.com/emailsupport/de 01805671548 9:00 A.M.–17:00 P.M., M–F
Hungary www.usr.com/emailsupport/hu 01805671548 9:00 A.M.–17:00 P.M., M–F
Ireland www.usr.com/emailsupport/uk 1890-252-130 9:00 A.M.–18:00 P.M., M–F
Italy www.usr.com/emailsupport/it 848 80 9903 9:00 A.M.–17:00 P.M., M–F
Luxembourg www.usr.com/emailsupport/be [phone]:00 A.M.–17:00 P.M., M–F
Middle East/Africa www.usr.com/emailsupport/me [phone]:00 A.M.–17:00 P.M., M–F
Netherlands www.usr.com/emailsupport/bn 0900 20 25 857 9:00 A.M.–17:00 P.M., M–F
Norway www.usr.com/emailsupport/ea [phone]:00 A.M.–17:00 P.M., M–F
Poland www.usr.com/emailsupport/pl
Portugal www.usr.com/emailsupport/pt [phone]:00 A.M.–17:00 P.M., M–F
Spain www.usr.com/emailsupport/es 902 117 964 9:00 A.M.–17:00 P.M., M–F
Sweden www.usr.com/emailsupport/ea [phone]:00 A.M.–17:00 P.M., M–F
Switzerland www.usr.com/emailsupport/de +0848 840 200 9:00 A.M.–17:00 P.M., M–F
Turkey www.usr.com/emailsupport/tk
UK www.usr.com/emailsupport/uk 0870 844 4546 9:00 A.M.–17:00 P.M., M–F
Country Webmail Voice Support Hours

13
Instructions d'installation
Préparation de l'installation
ATTENTION : pour éviter tout risque de choc électrique, assurez-vous que votre
ordinateur et tous ses périphériques sont éteints et débranchés. Déconnectez
tous les câbles téléphoniques des modems avant de retirer le boîtier de
l'ordinateur. Touchez une zone métallique non peinte du boîtier de votre
ordinateur afin de vous décharger de toute électricité statique. Vous protégerez
ainsi votre équipement des décharges électrostatiques.
REMARQUE : USRobotics recommande de désinstaller tout autre modem
faisant partie de votre système et de débrancher tous les cordons
téléphoniques reliés à ces modems. Reportez-vous au manuel de votre ancien
modem pour connaître les instructions de désinstallation.
Inscrivez le numéro de série de votre nouveau modem USRobotics dans la case ci-dessous.
Ce numéro de série se trouve sur le code barre blanc autocollant situé sur le modem et sur
sa boîte. Si vous avez besoin d'appeler notre service d'assistance technique, vous aurez
besoin de ce numéro et de votre numéro de modèle.
Installation du modem
Etape 1 : installation du modem dans l'ordinateur.
Mettez votre ordinateur ainsi que tous les
périphériques hors tension, puis débranchez
l'ordinateur et retirez son boîtier. Retirez le
couvercle d'un bloc d'extension PCI disponible.
En général, les emplacements PCI sont en
plastique blanc. Le couvercle de bloc est situé à
l'arrière de l'ordinateur et recouvre une zone
ouverte dans le boîtier de l'ordinateur. Utilisez la
vis ou le clip pour le remettre en place.
Insérez le modem dans l'emplacement PCI. Il
vous faudra peut-être pousser fermement le
modem vers l'avant et l'arrière pour qu'il soit
bien enfoncé dans l'emplacement.
L'enveloppe métallique recouvrira l'ouverture à
l'arrière de l'ordinateur. Le cas échéant, fixez le modem avec la vis ou le clip que vous avez
retiré. Replacez le boîtier de l'ordinateur.
Numéro de modèle Numéro de série
5671

14
Etape 2 : connexion du modem à une ligne téléphonique analogique.
Branchez une extrémité du cordon téléphonique fourni dans la prise du modem marquée
et l'autre extrémité dans une prise téléphonique murale analogique.
ATTENTION : l'USRobotics 56K PCI Faxmodem nécessite une ligne
téléphonique analogique standard. Ne connectez pas votre modem à une ligne
téléphonique numérique. Les lignes numériques sont souvent utilisées dans
les immeubles de bureaux et dans les hôtels. Si vous ne connaissez pas la
nature de votre ligne (analogique ou numérique), contactez votre
administrateur réseau ou votre opérateur téléphonique local.
Etape 3 : installation des pilotes du modem.
L'installation des pilotes est différente en fonction du système d'exploitation utilisé. Suivez
les instructions ci-dessous relatives à votre version de Windows.
Windows XP
REMARQUE : s'il vous est demandé, lors de l'installation, de choisir
l'emplacement de vos pilotes d'installation, précisez l'emplacement suivant sur
le CD-ROM d'installation (en supposant que D: est votre lecteur CD-ROM) :
D:\2000_XP
1. Rebranchez l'ordinateur et tous les périphériques, puis allumez votre ordinateur.
2. Connectez-vous à Windows.
3. Lorsque l'Assistant Nouveau matériel détecté apparaît, sélectionnez Non, pas
maintenant, puis cliquez sur Suivant.
4. Insérez le CD-ROM d'installation dans votre lecteur CD-ROM.
5. Si un message à propos de l'installation du matériel apparaît, cliquez sur Continuer*.
6. Une fois que Windows a terminé l'installation des pilotes, cliquez sur Terminer.
Windows Me
REMARQUE : s'il vous est demandé, lors de l'installation, de choisir
l'emplacement de vos pilotes d'installation, précisez l'emplacement suivant sur
le CD-ROM d'installation (en supposant que D: est votre lecteur CD-ROM) :
D:\
1. Rebranchez l'ordinateur et tous les périphériques, puis allumez votre ordinateur.
2. Connectez-vous à Windows.
3. Lorsque l'Assistant Ajout de nouveau matériel apparaît, insérez le CD-ROM
d'installation dans votre lecteur CD-ROM.
4. Installez l'U.S. Robotics V.92 PCI Modem Enumerator comme suit :
A. Sélectionnez Recherche automatique d'un meilleur lecteur (recommandé) et
cliquez sur Suivant.
* USRobotics a procédé à des tests complets sur les équipements pris en charge et s'est assuré de la compatibilité avec
Windows XP et 2000.