V-TAC 80133970 User manual

INSTRUCTION MANUAL
WIFI DONGLE FOR SOLAR INVERTER
IN CASE OF ANY QUERY/ISSUE WITH THE PRODUCT, PLEASE REACH OUT TO US AT: [e-mail]
FOR MORE PRODUCTS RANGE, INQUIRY PLEASE CONTACT OUR DISTRIBUTOR OR NEAREST
DEALERS. V-TAC EUROPE LTD. BULGARIA, PLOVDIV 4000, BUL.L.KARAVELOW 9B
Thank you for selecting and buying V-TAC Product. V-TAC will serve you
the best. Please read these instructions carefully & keep this user manual
handy for future reference. If you have any another query, please contact
our dealer or local vendor from whom you have purchased the product.
They are trained and ready to serve you at the best.
INTRODUCTION
Multi-Language Manual QR CODE
Please scan the QR code to access the manual
in multiple languages.

WARNING
DOWNLOAD APP
1. Please make sure to turn off the power before starting the installation.
2. Installation must be performed by a qualified electrician.
NOTICE:
Please read this manual carefully before using products and keep it in the place
where O&M providers can easily find.
Due to product upgrade and other factors, the content of this manual might
change from time to time. Please take actual product as standard and get latest
manual from www.solarman.cn or sales. Unless otherwise agreed herein, this
manual will only be used as guidance. Any
statement, information or suggestion in this manual will not take any form of
responsibility.
Without written permission, any content of this document (partly or entirely)
cannot be extracted, copied or transmitted in any form by any company or
individual.
Caution, risk of
electric shock.
This marking indicates that this
product should not be disposed
of with other household wastes.
20
PAP
SOLARMAN Smart
for end user
SOLARMAN Business
for business
IOS: Search “SOLARMAN Smart” in Apple Store.
Android: Search “SOLARMAN Smart” in Google Play.

The normal operation status of the stick logger, when router connected to the network
normally:
1.Connection to the server succeeded: NET light keeps on after the logger powered on.
2.Logger running normally: READY light flashes.
3.Connection to the inverter succeeded: COM light keeps on.
Type 1
Step1: Assemble logger to the inverter
communication interface as shown in the
diagram.
Logger Status
Check Indicator light
Type 2
Step1: Assemble logger to the inverter
communication interface as shown in the
diagram.
Warning:
Please do not hold the logger body to rotate while
install or remove the logger.
1. Stick Logger Installation
ImplicationLights Status Description(All lights are single green lights.)
Communication
with router
Communication
with inverter
Logger running
status
1.Light off: Connection tothe router failed.
2.On 1s/Off 1s(Slow flash): Connection tothe router succeeded.
3.Light keeps on: Connection to the server succeeded.
4.On 100ms/Off 100ms(Fast flash): Distributing network fast.
1.Light keeps on: Logger connected tothe inverter.
2.Light off: Connection tothe inverter failed.
3.On 1s/Off 1s(Slow flash): Communicating with inverter.
1.Light off: Running abnormally.
2.On 1s/Off 1s (Slow flash): Running normally.
3.On 100ms/Off 100ms(Fast flash): Restore factory settings.
NET
COM
READY

ABNORMAL STATE PROCESSING
If the data on platform is abnormal when the stick logger is running, please check the table
below and according to the status of indicator lights to complete a simple troubleshooting.
If it still can not be resolved
or indicator lights status do not show in the table below, please contact Customer Support.
(Note: Please using the following table query after power-on for 2mins at least.)
NET COM READY
Fault CauseFault Description
Solution
OFF
Slow
flash
Slow
flash
ON
ON
1.Stick logger does
not have a network.
2.Antenna abnormal
3.Router WiFi signal
strength weak.
1.Router networking
abnormal.
2.The server point
of logger is modified.
3.Network limitation,
server cannot be
connected.
1.Connection betw-
een stick logger and
inverter loosen.
2.Inverter does not
match with stick log-
ger’s communication
rate.
1.Check if the wireless network
configured.
2.Check the antenna, if there is any
damage or loose.
3.Enhance router WiFi signal
strength.
4.Long press Resetbutton for 10s,
reboot stick logger and networking
again.
1.Check if the router has access to
the network.
2.Check the router’s setting, if the
connection is limited.
3.Contact our customer service.
1.Check the connection between
stick logger and inverter. Remove
the stick logger and install again.
2.Check inverter’s communication
rate to see if it matches with stick
logger’s.
3.Long press Reset button for 5s,
reboot stick logger.
Connection between
logger and router
abnormal
Connection betwe-
en logger and router
normal, connection
between logger and
remote server
abnormal.
Communication with
inverter abnormal
NET COM READY
OFF
Any
state
Slow
flash
Slow
flash
1.Connection betw-
een stick logger and
inverter loosen or
abnormal.
2.Inverter power in-
sufficient.
3.Stick Logger abn-
ormal.
1.Check the connection, remove the
stick logger and install again.
2.Check inverter output power.
3.Contact our customer service.
Power supply
abnormal
Fast
flash
Restore
factory settings
Normal
1.Exit automatically after 1mins.
2.Long press Reset button for 5s,
reboot stick logger.
3.Long press Reset button for 10s,
restore factory settings.
OFF OFF OFF
Any
state
Any
state
Fast
flash
SMARTLINK
networking status
Normal
1.Exit automatically after 5mins.
2.Long press Reset button for 5s,
reboot stick logger.
3.Long press Reset button for 10s,
restore factory settings.
Any
state
Any
state

1.Registration
Go to SOLARMAN Smart and register.
Click "Register" and create your
account here.
2.Create a Plant
Click "Add Now" to create your plant.
Please fill in plant basic info and
other info here.
USAGE METHODS AND NOTICES FOR RESET BUTTON
Usage methods and key-press descriptions for Reset button
NOTICES FOR RESET BUTTON
USER MANUAL FOR SOLARMAN SMART APP
Notice:
Do not remove waterproof plug.
Key-press Status Description Light Status
Short press 1s SMARTLINK rapid networking status. NET light flashes fast for 100ms.
Long press 5s Rebooting the stick logger. All lights are extinguished immediately.
Long press 10s Rese�ing the stick logger.
1.All lights are extinguished after 4s.
2.READY light flashes fast for 100ms.
Usage: Press

3.Add a Logger
Method 1: Enter logger SN manually.
Method 2: Click the icon in the right and
scan to enter logger SN
You can find logger SN in the external
packaging or on the logger
body.
4.Network Configuration
After the logger is added, please
configure the network to ensure
normal operation.
Go to "Plant Details"-"Device List",
find the target SN and click
"Networking".
Step 1：Confirm Wi-Fi Info
Please make sure your phone has
connected to the right WiFi
network. And click "Start".
Notice:
5G WiFi is not supported .

Step 2：Connect to AP network
Click "Go to connect" and find the right
"AP_XXXXX" network
(XXXXX Refers to logger SN).
If the password is required, you can
find the password on the logger body.
Go back to SOLARMAN Smart APP, after
connecting to AP network.
Step 3：Auto Configuration
Please wait for a while to complete the
configuration. Then system will switch
to the following page.
Click "Done" to check plant data.
(Usually, the data will be updated in 10
mins)
Warning:
Please make sure the stick logger is working properly before you leave the site. If there is
anything abnormal, please do not leave the site and contact customer service