V-tech Go! Go! Smart Wheels Press & Race SmartPoint... Assembly Instructions

Go! Go! Smart Wheels®Press & RaceTM
SmartPoint®Vehicle Parent’s Guide
BATTERY INSTALLATION
1. Make sure the unit is turned Off.
2. Locate the battery cover on the back of the
unit. Use a screwdriver to loosen the screw.
3. Install 1 new AAA (AM-4/LR03) battery
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
WARNING: All packing materials such as tape, plastic sheets,
packaging locks, removable tags, cable ties and
packaging screws are not part of this toy, and should
be discarded for your child’s safety.
NOTE: Please keep this parent’s guide as it contains
important information.
ATTENTION: Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches, étiquettes
et vis d’emballage. Ils ne font pas partie du jouet.
NOTE : Il est conseillé de conserver ce guide des parents car
il comporte des informations importantes.
WARNING: For your child’s safety, do not press and release the
vehicle on clothing, body or hair.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-zinc) or
rechargeable, or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in fire.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if removable).
• Rechargeable batteries are only to be charged under adult supervision.
PRODUCT FEATURES
1. ON/OFF SWITCH
To turn the unit On, slide the On/Off switch to
the On position. To turn the unit Off, slide
the On/Off switch to the Off position.
2. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Go! Go! Smart Wheels®Press & Race™
vehicle will automatically power down after approximately 60 seconds without
input. The vehicle can be turned on again by pressing the Action or Light-
Up buttons, pressing down on the vehicle, pushing the vehicle quickly or by
placing it on a SmartPoint®location.
NOTE: This product is in Try-Me mode in the packaging. After opening the package,
12
91-003299-030
Turn the packaging lock counter-
clockwise several times.
Pull out and discard the packaging lock.
Unlock the packaging locks:

turn the vehicle off and on again to proceed with normal play. If the unit powers
down while playing, we suggest changing the battery.
NOTE : Ce produit est actuellement en mode démonstration. Une fois déballé,
veuillez éteindre puis remettre en marche ce jouet pour activer toutes ses
fonctionnalités.
ACTIVITIES
1. Slide the On/Off switch to turn the unit On.
You will hear sounds, a song and a phrase.
The light will flash with the sounds.
2. Press the Light-Up button to hear sounds,
songs and phrases. The light will flash with
the sounds.
3. Press down on the vehicle to hear fun sounds
and phrases. Release the vehicle to watch
it roll forward on its own. The light will flash
with the sounds.
4. Push the vehicle to hear fun sounds. If a
melody is already playing, push the vehicle
to add fun sounds on top of the melody. The
light will flash with the sounds.
Note: For optimal performance, we recommend
using Press & Race™ vehicles on smooth,
flat surfaces or Go! Go! Smart Wheels®
tracks (sold separately).
34
5. Press the Action button on the side of the
vehicle to activate a mechanical feature and
hear a fun sound. Press and hold the button
to hear fun sound effects and phrases. Press
the button continuously to trigger a short tune
with a sound effect.
6. For added fun, the vehicle interacts with
most Go! Go! Smart Wheels®playsets.
Simply roll or place the vehicle over one of
the SmartPoint®locations to see the light
flash and to hear greetings, fun sounds, short
tunes and sing-along songs. (Each playset is
sold separately.)
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct heat source.
3. Remove the battery when the unit is not in use for an extended period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit to moisture
or water.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow these steps:
1. Please turn the unit OFF.
2. Interrupt the power supply by removing the battery.
3. Let the unit stand for a few minutes, then replace the battery.
4. Turn the unit ON. The unit should now be ready to play again.
5. If the product still does not work, replace with a new battery.
If the problem persists, please call our Consumer Services Department at 1-800-521-2010
in the U.S. or 1-877-352-8697 in Canada, or by going to our website at vtechkids.com
and filling out our Contact Us form located under the Customer Support link. A service
representative will be happy to help you.

Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Caution: Changes or modifications not expressly approved by the party responsible
for compliance could void the user’s authority to operate the equipment.
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC RULES. OPERATION
IS SUBJECT TO THE FOLLOWING TWO CONDITIONS: (1) THIS DEVICE
MAY NOT CAUSE HARMFUL INTERFERENCE, AND (2) THIS DEVICE MUST
ACCEPT ANY INTERFERENCE RECEIVED, INCLUDING INTERFERENCE
THAT MAY CAUSE UNDESIRED OPERATION.
CAN ICES-3 (B)/NMB-3(B)
5
Visit our website for more
information about our products,
downloads, resources and more.
vtechkids.com
TM & © 2018 VTech Holdings Limited.
All rights reserved.
Printed in China.
91-003299-030 US
Read our complete warranty policy online at
vtechkids.com/warranty
IMPORTANT NOTE:
Creating and developing VTech®products is accompanied by a responsibility
that we at VTech®take very seriously. We make every effort to ensure the
accuracy of the information, which forms the value of our products. However,
errors sometimes can occur. It is important for you to know that we stand
behind our products and encourage you to call our Consumer Services
Department at 1-800-521-2010 in the U.S. or 1-877-352-8697 in Canada,
or by going to our website at vtechkids.com and filling out our Contact Us
form located under the Customer Support link with any problems and/or
suggestions that you might have. A service representative will be happy to
help you.