V-tech Go Go Smart Wheels Train Station Playset User manual

User’s Manual
© 2013 VTech
Printed in China
91-002858-007 US
P
l
a
y
t
i
m
e
w
i
t
h
m
i
l
e
s
o
f
l
e
a
r
n
i
n
g
!
Train Station Playset

Dear Parent,
Go! Go! Smart Wheels Go! Go!
Smart Wheels
fun as well.
Go! Go! Smart Wheels features vehicles that interact with your
child by lighting up, singing and talking, while teaching your
SmartPoint™
Go! Go! Smart Wheels playsets
vehicles respond to each unique SmartPoint™ location with
singing, sound effects and fun phrases.
Our Go! Go! Smart Wheels
Go! Go! Smart Wheels playsets
your child can do!
To learn more about VTech
With Go! Go! Smart Wheels
Sincerely, VTech®
®
®
®
®
®
®
®
SmartPoint™

2
INTRODUCTION
Thank you for purchasing the VTech®Go! Go! Smart Wheels®Train
Station Playset learning toy!
The Go! Go! Smart Wheels®Train Station Playset™ by VTech®lets
your child play like a real conductor! Spark your child’s imagination as
they combine 32 tracks into different congurations. Watch the motorized
train engine and cargo car chug along the tracks and go into the station,
under the bridge and through the tunnel. The train and other Go! Go!
Smart Wheels®SmartPointTM vehicles (each sold separately) respond
to 10 SmartPoint™ locations that teach early language development
skills. All aboard! It’s playtime with miles of learning!
Introduction
Piano keys
3 play pieces
Connect tracks to other
Go! Go! Smart Wheels®playsets
(each sold separately)
Light-up
button
Storage
tower
Incline 10 SmartPointTM
locations
1 motorized train*
(*Press the smokestack to turn on the train’s motor.)

3
INCLUDED IN THIS PACKAGE
• One VTech®Go! Go! Smart Wheels®Motorized Train with
SmartPointTM cargo car
• One VTech®Go! Go! Smart Wheels®electronic train station with
one SmartPointTM track
• One incline
• One storage tower
• Two SmartPointTM tracks with trafc lights
• One SmartPointTM track with road sign
• Two bridge supports
Included In This Package

4
• Four 90-degree tracks, male
• Three 90-degree tracks, female
• Four cross tracks
• Eight short tracks
• Five straight tracks
• Two straight SmartPointTM tracks
• One SmartPointTM track for the storage tower
• One SmartPointTM tunnel track
• One spiral ramp with SmartPointTM location
• One circle sign
• One destination board
• One road block
• One block for the storage tower
• One curved piece for the cross tracks (changes direction)
• One gate railing with base for station
• One trafc light
• One User’s Manual
WARNING: All packing materials, such as tape, plastic sheets,
packaging locks and tags are not part of this toy, and
should be discarded for your child’s safety.
ATTENTION : Pour la sécurité de votre enfant, débarrassez-vous
de tous les produits d’emballage tels que rubans
adhésifs, feuilles de plastique, attaches et étiquettes.
Ils ne font pas partie du jouet.
NOTE: Please keep user’s manual as it contains important
information.
Included In This Package

5
Assembly Instructions
Rotate the packaging lock
counter-clockwise 90 degrees
Pull out the packaging lock
Unlock the packaging locks:
ASSEMBLY INSTRUCTIONS
With the VTech®Go! Go! Smart Wheels®Train Station Playset,
safety comes rst. To ensure your child’s safety, adult assembly is
required.
ELECTRONIC STATION
1. Attach the gate railing base to
the SmartPointTM track of the
electronic station. You will hear a
‘click’ sound to indicate the track
is secure.
2. Place the trafc light on the gate
railing.
TUNNEL
1. Attach the incline to the SmartPointTM tunnel
track. You will hear a ‘click’ sound to indicate the
track is secure.

6
STORAGE TOWER
1. Attach the storage tower
structure to its SmartPointTM
track. You will hear a ‘click’
sound to indicate the structure
is secure.
After the above steps, connect these pieces to the included track pieces.
You can congure them into different arrangements.
GETTING STARTED
BATTERY INSTALLATION - TRAIN
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the bottom of the
unit. Use a screwdriver to loosen the screw.
3. Install 3 new AAA (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
Getting Started

7
BATTERY INSTALLATION – STATION
1. Make sure the unit is turned OFF.
2. Locate the battery cover on the back of the
station. Use a coin or a screwdriver to loosen
the screw.
3. Install 2 new ‘AAA’ (AM-4/LR03) batteries
following the diagram inside the battery
box. (The use of new alkaline batteries is
recommended for maximum performance.)
4. Replace the battery cover and tighten the
screw to secure.
BATTERY NOTICE
• Use new alkaline batteries for maximum performance.
• Use only batteries of the same or equivalent type as
recommended.
• Do not mix different types of batteries: alkaline, standard (carbon-
zinc) or rechargeable (Ni-Cd, Ni-MH), or new and used batteries.
• Do not use damaged batteries.
• Insert batteries with the correct polarity.
• Do not short-circuit the battery terminals.
• Remove exhausted batteries from the toy.
• Remove batteries during long periods of non-use.
• Do not dispose of batteries in re.
• Do not charge non-rechargeable batteries.
• Remove rechargeable batteries from the toy before charging (if
removable).
• Rechargeable batteries are only to be charged under adult
supervision.
Battery Notice

8
PRODUCT FEATURES - TRAIN
1. ON/OFF SWITCH
To turn the unit ON, slide the ON/OFF SWITCH
to the ON ( ) position. To turn the unit OFF,
slide the ON/OFF SWITCH to the OFF ( )
position.
2. SMOKESTACK MOTOR BUTTON
Press the SMOKESTACK MOTOR BUTTON
to activate the motor. Press the button again
to stop the motor.
3. AUTOMATIC SHUT-OFF
To preserve battery life, the VTech®Go! Go! Smart Wheels®
Motorized Train will automatically power-down after approximately
30 seconds without input while the motor is off. The unit can only
be turned on again by pressing the light-up button or pushing the
train quickly.
ACTIVITIES - TRAIN
1. Slide the ON/OFF SWITCH to the ON position
to turn the unit ON. You will hear train sounds,
a song and a phrase. The light will ash with
the sounds.
2. Press the SMOKESTACK MOTOR BUTTON
to start the motor. The train will move forward
automatically, and you will hear train sounds.
The light will ash with the sounds.
3. Press the LIGHT-UP BUTTON to hear train
sounds, songs and phrases. Press and hold
the LIGHT-UP BUTTON to stop the motor. The
motor will restart after the button is released.
Activities

9
The light will ash with the sounds.
4. While the motor is off, push the train over the 10 SmartPointTM
locations included in the playset to hear greetings, fun sounds, short
tunes and sing-along songs. The light will ash with the sounds. The
train also interacts with SmartPointTM locations on other VTech®Go!
Go! Smart Wheels® playsets (each playset sold separately). The
light will ash with sounds.
5. While the SMOKESTACK MOTOR BUTTON is pressed down, let
the train run through the SmartPointTM locations to hear greetings,
fun sounds, short tunes and sing-along songs. The light will ash
with the sounds.
Sometimes the train will make stops along the track for added fun.
6. While the motor is off, if there is no input after approximately 8
seconds, you will hear an invitation and a sound effect. After another
8 seconds of no input, a song will play. If there is no input for an
additional 8 seconds, the unit will play a short tune and then go into
sleep mode. While the motor is running, you’ll hear all of the above,
then the train will enter sleep mode after 5 minutes of no input. The
train can be re-activated by pressing the light-up button, pressing
down the smokestack motor button or pushing the train quickly.
SING-ALONG SONG LYRICS
SONG 1
My train is ready,
Let’s start our journey!
Choo, choo, toot, toot.
Chug along with me!
SONG 2
My train is so powerful.
Chugging along is wonderful!
SONG 3
Carrying cars short and long,
Activities