V-tech Shake It Bluey User manual

ShAkE It BLUEY
Instruction Manual

2
INTRODUCTION
Thank you for purchasing the Shake It Bluey toy!
This cute pup has five fun movements with sounds. Let’s play a
game together for real life!
Wave Arm
Nose Button
Turn Head
Bop Body Light-Up Tummy
Shake Shaker
Off/Mode Selector

3
Battery Door
Speaker
Volume Switch

4
INCLUDED IN THE PACKAGE
• Shake It Bluey
• Quick Start Guide
WARNING
All packing materials such as tape, plastic sheets, packaging locks,
removable tags, cable ties, cords and packaging screws are not part
of this toy, and should be discarded for your child’s safety.
NOTE
Please save this Instruction Manual as it contains important information.
ATTENTION
Pour la sécurité de votre enfant, débarrassez-vous de tous les produits
d’emballage tels que rubans adhésifs, feuilles de plastique, attaches,
étiquettes, cordons et vis d’emballage. Ils ne font pas partie du jouet.
NOTE
Il est conseillé de sauvegarder ce manuel d’utilisation car il comporte
des informations importantes.
Unlock the Packaging Locks
Turn the packaging lock counterclockwise
several times.
Pull out and discard the packaging lock.

5
GETTING STARTED
Battery Removal and Installation
1. Make sure the unit is turned Off.
2. Find the battery cover located on the
back of Bluey’s head, use a screwdriver
to loosen the screw, and then open the
battery cover.
3. Remove old batteries by pulling up on one end of each battery.
4. Install 2 new AAA (AM-4/LR03) batteries following the diagram
inside the battery box. (For best performance, alkaline batteries or
fully charged Ni-MH rechargeable batteries are recommended).
5. Replace the battery cover and tighten the screw to secure.
WARNING:
Adult assembly required for battery installation.
Keep batteries out of reach of children.
ATTENTION :
Les piles ou accumulateurs doivent être installés par un
adulte.
Tenir les piles ou accumulateurs hors de portée des enfants.

6
IMPORTANT: BATTERY INFORMATION
• Insert batteries with the correct polarity (+ and -).
• Do not mix old and new batteries.
• Do not mix alkaline, standard (carbon-zinc) or rechargeable
batteries.
• Only batteries of the same or equivalent type as recommended
are to be used.
• Do not short-circuit the supply terminals.
• Remove batteries during long periods of non-use.
• Remove exhausted batteries from the toy.
• Dispose of batteries safely. Do not dispose of batteries in fire.
RECHARGEABLE BATTERIES
• Remove rechargeable batteries (if removable) from toy before
charging.
• Rechargeable batteries are only to be charged under adult
supervision.
• Do not charge non-rechargeable batteries.
ACTIVATE NORMAL PLAY MODE
This product is in Try-Me mode in the packaging. When you play
with Shake It Bluey for the first time, turn the toy on then switch the
Volume Switch from High to Low. You will hear two “du” sounds
and Bluey’s tummy will flash twice to indicate normal play mode.

7
PRODUCT FEATURES
1. Off/Mode Selector
Slide the Off/Mode Selector to Free-Play
mode or Follow Me mode to turn
the unit On and start playing. To turn the
unit Off, slide the selector to Off .
2. Turning Head
Turn Bluey’s head to the left and right to
hear fun responses.
3. Sniffing Nose
Press Bluey’s nose to hear her sniff and
sneeze.
4. Waving Arm
Wave Bluey’s right arm to hear fun
responses.
5. Shake Shaker
Shake the Shaker to hear sounds and
melodies.

8
6. Bopping Body
Bop Bluey’s body to count and listen to
melodies.
7. Light-Up Tummy
See Bluey’s tummy light up with the
sounds and music.
8. Volume Switch
Switch to Low/High volume position to
adjust the volume.
9. Automatic Shut-Off
To preserve battery life, the Shake It Bluey will shut off automatically
after several minutes without input. The unit can be turned on again
by sliding the Off/Mode Selector. The unit will also automatically
turn off when the batteries are low. Bluey’s tummy will flash three
times as a reminder to change the batteries.
NOTE
If the unit powers down or if the light fades out during play, please
install a new set of batteries.

9
ACTIVITIES
1. Free-Play Mode
In Free Play mode, press a button or move Bluey’s body to activate
sounds, phrases and music.
2. Follow Me Mode
In Follow Me mode, follow the directions with upbeat music to
play. Three progressive levels allow less time for input as the level
increases.
CARE & MAINTENANCE
1. Keep the unit clean by wiping it with a slightly damp cloth.
2. Keep the unit out of direct sunlight and away from any direct
heat sources.
3. Remove the batteries if the unit will not be in use for an extended
period of time.
4. Do not drop the unit on hard surfaces and do not expose the unit
to moisture or water.
5. Do not apply force when moving Bluey’s body.
TROUBLESHOOTING
If for some reason the unit stops working or malfunctions, please follow
these steps:
1. Turn the unit Off.
2. Interrupt the power supply by removing the batteries.
3. Let the unit stand for a few minutes, then replace the batteries.
4. Turn the unit back On. The unit should now be ready to use again.
5. If the unit still does not work, install a new set of batteries.

10
NOTE
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against
harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio or television
reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or
more of the following measures:
• Reorient or relocate the receiving antenna
• Increase the separation between the equipment and receiver
• Connect the equipment into an outlet on a circuit different from that
to which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help
CAUTION
Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate
the equipment.
IMPORTANT NOTE:
If the problem persists, please call our Consumer Services Department
at 1-800-521-2010 in the U.S., 1-877-352-8697 in Canada, or by going to
our website vtechkids.com and filling out our Contact Us form located
under the Customer Support link. Creating and developing VTech
products is accompanied by a responsibility that we take very seriously.
We make every effort to ensure the accuracy of the information, which
forms the value of our products. However, errors sometimes can occur.
It is important for you to know that we stand behind our products and
encourage you to contact us with any problems and/or suggestions you
might have. A service representative will be happy to help you.

11
THIS DEVICE COMPLIES WITH PART 15 OF THE FCC
RULES. OPERATION IS SUBJECT TO THE FOLLOWING TWO
CONDITIONS: (1) THIS DEVICE MAY NOT CAUSE HARMFUL
INTERFERENCE, AND (2) THIS DEVICE MUST ACCEPT ANY
INTERFERENCE RECEIVED, INCLUDING INTERFERENCE THAT
MAY CAUSE UNDESIRED OPERATION.
CAN ICES-003(B)/NMB-003(B)
Supplier’s Declaration of Conformity
47 CFR § 2.1077 Compliance Information
Trade Name: VTech®
Model: 5602
Product Name:
Shake it Bluey
Responsible Party: VTech Electronics North America, L.L.C.
Address: 1156 W. Shure Drive, Suite 200
Arlington Heights, IL 60004
Website: vtechkids.com

TM & © 2023 VTech Holdings Limited.
All rights reserved.
IM-560200-000
Version:0
Visit our website for more
information about our products,
downloads, resources and more.
vtechkids.com
vtechkids.ca
Read our complete warranty policy online at
vtechkids.com/warranty
vtechkids.ca/warranty
BLUEY TM and BLUEY character logos TM & © Ludo
Studio Pty Ltd 2018. Licensed by BBC Studios. BBC logo
TM & © BBC 1996