VABCHES D8L248BS01 User manual

1/20
As this item contains many parts, please read the installation
instruction carefully before installation and complete the
installation with the cooperation of your partner. Please use
tools properly and carefully. If you have any questions about
the product and installation, please contact us.
Our professional after-sales team will serve you online all
[e-mail]
day.
D8L248BS01
WhatsApp community↑

Before You Start
P
P
P
P
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware of to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw.
P
Helpful Hints
.\Ameriwood Home Manual Template\Ameriwood Home Manual Template 3-03.bmp
.\Ameriwood Home Manual Template\Ameriwood Home Manual Template 3-04.bmp
.\Ameriwood Home Manual Template\Ameriwood Home Manual Template 3-05.bmp
.\Ameriwood Home Manual Template\Ameriwood Home Manual Template 3-010.bmp
.\Ameriwood Home Manual Template\Ameriwood Home Manual Template 3-011.bmp
.\Ameriwood Home Manual Template\Ameriwood Home Manual Template 3-012.bmp
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with an R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- Use all the nails provided for the back panel and spread them out equally.
- Back panel must be used to make sure your unit is sturdy.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
PEOPLE NEEDED FOR ASSEMBLY: 1-2
2/20

Board Identification
Not actual size
3/20
A
TOP
Qty:1
B
LEFT SIDE PANEL
Qty:1
C
Qty:1
RIGHT SIDE PANEL
D
BACK PANEL
Qty:1
E
FIXED SHELF
Qty:1
F
Qty:1
G
Qty:1
H
Qty:1
I
Qty:2
BACK PANEL
FRONT PULL BAR
REAR PULL BAR
DRAWER FRONT

Board Identification
Not actual size
4/20
J
Qty:2
K
Qty:2
DRAWER LEFT SIDE
L
Qty:2
M
DRAWER BOTTOM
Qty:2
DRAWER BACK PANEL
DRAWER RIGHT SIDE

Not actual size
Board Identification
5/20
A
B
C
D
E
F
G
H
I
I
J
J
K
K
L
L
M
M

MODE
+
SPEED
- DEMO SPEED +
MODE
-
COLOR
+
COLOR
-
BRIGHT
+
BRIGHT
-
Part List
6/20
∅15X9.5mm
1X24
CAM LOCK
spare：2
∅6X35mm
2X24
CAM BOLT
spare：2
∅6X30mm
3X18
WOOD DOWEL
spare：1
∅4X35mm
4X10
SCREW
∅3X12mm
5X4
SCREW
spare：1
X2
X2 X2 8X1
POWER STRIP
9X2
HANDLE
M4*19mm
10 X2
SCREW
11 X1set
STRIP OF LIGHTS
∅21mm
12 X8
PERFECT STICKERS
12"
7CR
RIGHT CABINET MEMBER
12"
7DL
LEFT DRAWER RUNNER
12"
7DR
RIGHT DRAWER RUNNER
6
12"
7CL X2
LEFT CABINET MEMBER
13 X4set
∅3*14mm
BACK PANEL BUCKLE
spare：1
∅6X10mm
X8
SCREW
spare：1
spare：1

Part List
7/20
∅35mm
14 X1
GROMMET LIGHT STRIP SNAP
Cam Lock
Fastening
System
12
34
The opening must point toward the
edge of the board
Insert the cam bolt into the
hole first, then insert the cam
lock and lock it.
X2
15
∅3.5X14mm
16 X12
SCREW
spare：1
∅4X65(25)
17 X1
TOOL
spare：1

8/20
STEP1
X2
15
A
∅3X12mm
5X2
∅6X30mm
3X2
A
FINISH
The direction is consistent
5
15
3
MODE
+
SPEED
- DEMO SPEED +
MODE
-
COLOR
+
COLOR
-
BRIGHT
+
BRIGHT
-
11 X1set
A
11
15
The No. 11 light strip is inclined
into the No. 15 buckle first, and
then press the other side with
your hand to enter the buckle
Before installing the strip, remove the
protective film on the strip

9/20
STEP2
D
D
A
∅6X30mm
3X2
∅4X35mm
4X1
3
4
∅35mm
14 X1
14

10/20
STEP3
D
E
4
∅4X35mm
4X1
∅6X30mm
3X10
E
A
3

RIGHT CABINET MEMBER
7CR
11/20
STEP4
6X8X2
12"
7CR
12"
7CL X2
B
C
UP
LEFT CABINET MEMBER
7CL
UP
7CL
7CR
7CR
7CL
∅6X10mm
6
6
6
6

12/20
STEP5
B
C
∅6X35mm
2X16
2

13/20
STEP6
C
E
∅15X9.5mm
1X4
H
∅6X30mm
3X4
EDGE BANDING
Proper orientation of CAM LOCK
UNLOCK
LOCK
17 X1
1
17 The space here is relatively small,
and tool 17 is recommended
G
3

14/20
Proper orientation of CAM LOCK
UNLOCK
LOCK
STEP7
∅15X9.5mm
1X4
G
H
C
1
EDGE BANDING
GROOVE
EDGE BANDING

15/20
STEP8
∅15X9.5mm
1X8
F
B
B
180° 1
Proper orientation of CAM LOCK
UNLOCK
LOCK
17 X1
1
17
The space here is relatively small,
and tool 17 is recommended

16/20
STEP9
∅15X9.5mm
1X8
∅6X35mm
2X8
∅4X35mm
4X8
∅21mm
12 X8
IJ
K
L
M
J
2
4
Step 1
Step 2
Step 3 Step 4 X2
I
1
12
J

17/20
STEP10
X2
∅3.5X14mm
16 X12X2 X2
12"
7DL
12"
7DR
7DR
RIGHT DRAWER RUNNER
16
7DL
LEFT DRAWER RUNNER
Third Hole
16
16
16
16
16
I
K

18/20
STEP11
13 X4set
∅3*14mm
13

19/20
STEP12
∅3X12mm
5X2 8X1 9X2
M4*19mm
10 X2
5
Cabinet Slide
Drawer Slide
10
9

20/20
MODE
+
SPEED
-
DEMO SPEED
+
MODE
-
COLOR
+
COLOR
-
BRIGHT
+
BRIGHT
-
MODE
+
/MODE:
-
Remote control instructions
DEMO:
SPEED/
+
SPEED:
-
COLOR/
+
COLOR:
-
BRIGHT
+
/BRIGHT:
-
ON/OFF
NOTE
1. During use, if the switch can work normally, but the remote control cannot, you need
to perform the code matching operation.
2.If the light is interfered by other remote controls or cannot be controlled remotely.
Please power off and then power on again before performing code matching.
How to perform code matching operation: Press and hold the start button on the remote
control for 3 seconds within 10 seconds of turning on the power, the light strip flashes 3
times with white light, indicating that the code（remote control） is matched.
Description of switch function
1. Power on/off:Press and hold the power button.
2.Change the mode:Short press the cycle button.(Multiple
mode options:Static Red/Static Green/Static Blue/Static
White/Multicolor Blinking/Multicolor Breathing/Red
Breathing/Blue Breathing/Green Breathing)
3.Adjust the flashing speed:Short press the power button.
4.Adjust the brightness:Press and hold the cycle button and
short press the power button meanwhile.
Mode switch+/Previous mode
Mode switch-/Next mode
Color cycle display mode,At demo mode，it plays dymamic modes in loop.
Adjust the flashing speed(Six speed mode)
Adjust the brightness(Six brightness mode)
（Both dynamic and static can be used）
Switch color（switch between static color）
In addition, there are 7 colors, making up a total of 25 color modes.
Cycle Button
You can use the switch or remote to
control the lighting effects.
RGB LED Controller Instrustions
Switch to dynamic mode from static color，or switch between dynamic modes.