VABCHES JY9940BS01 User manual

1-46
JY9940BS01
As this item contains many parts, please read the installation
instruction carefully before installation . Please use tools
properly and carefully. If you have any questions about the
product and installation, please contact us.
Our professional after-sales team will serve you online all
[e-mail]
day.

2-46
Read through each step carefully and follow the proper order
Separate and count all your parts and hardware
Give yourself enough room for the assembly process
Have the following tools: Flat Head Screwdriver, #2 Phillips Head
Screwdriver and Hammer
Caution: If using a power drill or power screwdriver for screwing,
please be aware of to slow down and stop when screw is tight.
Failure to do so may result in stripping the screw. （Assembly
speed can be increased by using electric screwdriver）
Helpful Hints
- Open your item in the area you plan to keep it to avoid excessive heavy lifting.
- Identify, sort and count the parts before attempting assembly.
- Compression dowels are lightly tapped in with a hammer.
- Slides are labeled with an R (right) and L (left) for proper placement.
- Make sure to always face the point on the top of the Cam Lock towards the
outer edge.
- If there is a back panel in the package, please install it to make sure your unit is
complete and sturdy.
-Please fix all the screws provided for the back panel which can enhance product
stability. If it is difficult to fix it when tightening, it can be fixed with the help of a
hammer and then tightened.
- Do NOT use harsh chemicals or abrasive cleaners on this item.
- Never push, pull, or drag your furniture.
PEOPLE NEEDED FOR ASSEMBLY: 1-2
Before You Start

3-46
Not actual size
1 x1
10 x2
2 x1
11 x2
3 x1
12 x1
4 x1
13 x1
5 x1
14 x1
6 x1
15 x1
7 x2
16 x1
8 x1
17 x2
9 x2
18 x2
Board ldentification
Sponge
Door plank Top plate
Upper layer board Upper rear panel Left and right glass surfaces
Panel Lower left panel Lower middle partition
Lower neutral plate Lower right panel Rear pull-up bar
Front dropdown bar Rear dropdown bar Kickboard&Rear Brace
Front pull rod Lower bottom plate
Lower back panel

4-46
Board ldentification
Not actual size
19 x1 20 x1 21 x1
22 x4 23 x1 24 x1
25 x1 26 x1 27 x1
28 x1 29 x1 30 x1
31 x1 32 x2 33 x2
34 x1 35 x2 36 x2
Dresser panels
Drawer left side plate Drawer right side plate
Right jewelry box layer boards
Left jewelry box layer boards Jewelry box backboard Jewelry box back panel
Rear panel of drawe
Shelving partition Shelving partition Movable Shelf
Desktop partition Upper back plate
Backboard clamp strip Lower back panel Left back panel
Right back panel Mirror door panel

5-46
Board ldentification
Not actual size
37 x1 38 x1 39 x1
40 x1 41 x2 42 x4
43 x4 44 x3 45 x3
46 x1 47 x1 48 x1
Left drawer panel
Middle drawer panel Right drawer panel Drawer left panel
Drawer right panel Small drawer back panel
Rear panel of large drawer Bottom panel of large drawer
Small drawer bottom panel
Bottom strip of large drawer
Dresser panels Rear panel of drawe

6-46
Part List
Ø6x35mm Ø15x10mm Ø6x30mm Ø4x35mm Ø3.5x12mm
A x65(+2) B x65(+2) C x58(+4) D x74(+4) E x68(+5)
Cam Bolt Cam Lock Flat Head
Dowel Tapping Screw Sliding Track Screw
CL x4 CR x4 DL x4 DR x4
L300mm L300mm L300mm L300mm
Ø4x14mm
Ø3x16mm
Ø6x30mm
Back Buckle
and screw Plastic Expansion
Sliding Track Sliding Track Sliding Track Sliding Track
Anti-Fall Strip Round head screw
Hole sticker
Ø3x12mm
Screw
A Hook
Socket Power Supply
Lamina Torus
L-1 L-2
G x10(+2) H x4 I x30(+3) J x4
K x3 L x8 M x2 N x2 O x2
P x1 Q x18(+1) R x1 S x2 T x1
U x2 V x2 W x24(+2) X x4 Y x5
F x15
P-1 P-2
Hair dryer holder
and Screw
Rebound device
Ø3x12mm
Screw
Handle screw
and handle
Y-1 Y-2
Backboard screws Strip
Ø4x12mm
Flat head screw
HingeHinge Sliding Track
K-1
K-2
K-3

7-46
Part List
Cam Lock
Fastening
System
Insert the cam bolt into the
hole first, then insert the
cam lock and lock it.
The opening must point toward the
edge of the board
12
34

8-46
Board ldentification
Not actual size
X2
1
2
4
5
6
3
7
8
913
10
12
14
10
15
17 18
19 25 21
26
24
17
20 18
16
22
22
22
22
28
27
29
30
31
32
33
34
35
11
36
36
35
23
33
32
37
38
42
43
44
45
11
40
47
46
48
41
42 42
43
43
45
44
11
9

9-46
STEP 1
Ø3.5x12mm
CL x1 CR x2
L300mm
L300mm
E x9
Ø6x35mm
A x8
EE
CL
E
E
E
CR
E
UP
CL
CR
UP
CR
AA
A
A
A
A
A
A
2
2
5
5

10-46
STEP 2
Ø3.5x12mm
CL x3 CR x2
L300mm
L300mm
E x15
Flip
Flip
UP
CL
CL
CL
CR
UP
CR
UP
EE
CL
E
E
E
CR
E
3
3
4
4