VADDIO 999-60210-000 User manual

Installation Guide for
EasyIP Systems
Featuring the EasyIP Decoder, EasyIP Mixer, and EasyIP Cameras
Document 411-0041-39 Rev D
July 2020

ii
Contents
Overview 1
What's in this Guide 2
The EasyIP Ecosystem 2
EasyIP Decoder 2
EasyIP Mixer 2
EasyIP Cameras 2
EasyIP Switch 3
EasyIP Decoder Features 3
EasyIP Mixer Features 3
EasyIP 10 Camera Features 3
EasyIP 20 Camera Features 4
Unpacking the EasyIP System Components 5
EasyIP Decoder AV-over-IP Switching USB Endpoint 5
EasyIP Mixer AV Switcher 5
EasyIP 10 AV-over-IP PTZ Camera 6
EasyIP 20 AV-over-IP PTZ Camera 7
A Quick Look at the EasyIP Family 8
EasyIP Decoder 8
Front View 8
Back View 8
EasyIP Mixer 9
Front View 9
Back View 9
EasyIP 10 Camera 10
Front View 10
Back View 10
EasyIP 20 Camera 11
Front View 11
Back View 11
Installation 12
Don’t Void Your Warranty! 12
Before You Start 12
Before Installing Cameras 13
Cabling Notes 13
RS-232 Serial Communication Settings and Port Pin-outs 14
EasyIP Mixer 14
EasyIP 20 Camera 15
Basic Connections – EasyIP Decoder 16
Basic Connections – EasyIP Mixer 17
Basic Connections – EasyIP Mixer with HDMI Input from EasyIP 20 Camera 18

Installing the Wall Mount for the Camera 19
About Ceiling-Mounted Cameras 19
Installing the Camera 20
Powering Up the EasyIP System 21
Next Steps 21
Operation, Storage, and Care 21
Compliance and Conformity Statements 22
FCC Part 15 Compliance 22
ICES-003 Compliance 22
European Compliance 23
Photo Credits 24
Index 25
iii
Installation Guide for EasyIP Systems

1
Overview
This guide discusses the following products:
nEasyIP Decoder AV-over-IP switching USB endpoint, 999-60210-000 (worldwide)
nEasyIP Mixer AV switcher, 999-60320-000 (worldwide)
nEasyIP 10 AV-over-IP PTZ camera, 999-30200-000 (black, worldwide)
EasyIP 10 AV-over-IP PTZ camera, 999-30200-000W (white, worldwide)
nEasyIP 20 AV-over-IP PTZ camera, 999-30230-000 (black, worldwide)
EasyIP 20 AV-over-IP PTZ camera, 999-30230-000W (white, worldwide)

What's in this Guide
This guide covers:
nUnpacking the system
nTips for a successful installation
nInstructions for installing the camera mount
nInformation on connecting the system components
nInformation on mounting the camera
nSystem power-on
Complete product information for the EasyIP product family is available in the Complete Manual for
EasyIP Systems.
Note
If you are responsible for configuring the equipment after installing it, you will need the Complete
Manual. It includes the information from this guide, plus information on system administration, operation,
and troubleshooting.
The EasyIP Ecosystem
Vaddio®EasyIP products are designed to be used together, and have limited or no compatibility with other
types of products.
nEasyIP cameras deliver video in Vaddio's proprietary EasyIP format.
nAn EasyIP host device (EasyIP Decoder or EasyIP Mixer) is required to convert the cameras' output
signal to an IP and/or USB stream.
nOnly paired EasyIP cameras can be controlled by the EasyIP host device.
nEasyIP host devices automatically detect EasyIP cameras on its own subnet.
nCameras are not required to be on the same subnet as the device that manages them.
nEasyIP products require PoE+ power. Typically the EasyIP system is powered by a PoE+ switch.
EasyIP Decoder
The decoder is the central component of a basic EasyIP installation. Its functions include
nVideo – pair with up to four cameras at a time, control the active camera via web interface, and decode
the camera's AV-over-IP signal.
nAudio – connect two EasyMic microphones (CeilingMIC or TableMIC) and a speaker.
nUSB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing
applications.
EasyIP Mixer
The mixer is the central component of a full-featured EasyIP pro AV room solution. Its functions include
nVideo – pair with up to four cameras at a time, control the active camera via web interface, and decode
the camera's AV-over-IP signal.
nAudio – two balanced audio inputs and outputs; pair with Dante®audio products on your network –
including up to four EasyIP microphones. Built-in audio mixer.
nUSB streaming – configure for UVC-compliant or client-custom USB streaming for conferencing
applications.
EasyIP Cameras
EasyIP cameras may be installed anywhere on the network. They require only a PoE+ power connection.
An EasyIP Decoder or EasyIP Mixer is needed as a host device to decode the AV-over-IP signal.
Each camera may be paired to two host devices.
2
Installation Guide for EasyIP Systems

EasyIP Switch
A PoE+ switch simplifies installation, eliminating the need for PoE+ power injectors and placing all the
connected products on the same subnet.
EasyIP Decoder Features
nUncompressed USB 3.0 streaming
nStreaming video resolutions up to 1080p/60
nFull-duplex audio streaming
nAudio inputs for two Vaddio EasyMic microphones
nHDMI video output for local display
nUniversal Video Class (UVC) and Universal Audio Class (UAC) drivers supported in Windows®,
macOS®, and Linux operating systems, compatible with most UC conferencing applications
nIntegration-ready Telnet control
nPairs with up to four EasyIP 10 cameras on your network to provide control and manage streaming
nEnterprise-class IT administrative capabilities with full web controls for remote management
EasyIP Mixer Features
nUncompressed USB 3.0 streaming
nStreaming video resolutions up to 1080p/60
nFull-duplex audio streaming
nLine-level inputs for two microphones
nLine-level outputs for two speakers
nAudio mixer and video switcher
nSupport for microphones and speakers with Dante®connectivity
nHDMI video output for local display
nUniversal Video Class (UVC) and Universal Audio Class (UAC) drivers supported in Windows®,
macOS®, and Linux operating systems, compatible with most UC conferencing applications
nIntegration-ready Telnet control
nPairs with up to four EasyIP 10 cameras on your network to provide control and manage streaming
nEnterprise-class IT administrative capabilities with full web controls for remote management
EasyIP 10 Camera Features
n2.14 Megapixel effective, native 1080p/60 full HD image sensor
n10x optical zoom, horizontal field of view of 67°
nResolutions up to 1080p/60
nPrecise pan and tilt movements at up to 90° per second
nIntegration-ready Telnet control
nPairs with an EasyIP Decoder or EasyIP Mixer, which provides video and audio connectivity and
manages streaming; each camera may be paired to two host devices.
nJust one cable – the EasyIP connection to a PoE switch
nEnterprise-class IT administrative capabilities with full web controls for remote management
3
Installation Guide for EasyIP Systems

EasyIP 20 Camera Features
n8.5 Megapixel effective, native 1080p/60 full HD image sensor
n20x optical zoom, horizontal field of view of 70.2°
nResolutions up to 1080p/60
nPrecise pan and tilt movements at up to 120° per second
nIntegration-ready Telnet control
nPairs with an EasyIP Decoder or EasyIP Mixer, which provides video and audio connectivity and
manages streaming; each camera may be paired to two host devices.
nOnly one connection required – the EasyIP connection to a PoE switch
nLocal HDMI output
nOptional RS-232 connection to a third-party control device
nEnterprise-class IT administrative capabilities with full web controls for remote management
4
Installation Guide for EasyIP Systems

Unpacking the EasyIP System Components
Make sure you received all the items you expected.
EasyIP Decoder AV-over-IP Switching USB Endpoint
Worldwide: 999-60210-000
The box should contain these items:
nEasyIP Decoder
nUSB 3.0 cable, type A to type B, 6 ft (1.8 m)
nCat-5e cable, 3 ft. (0.9 m)
n4-position Phoenix-type connector
nHalf-rack mounting kit
nQuick-Start Guide
EasyIP Mixer AV Switcher
Worldwide: 999-60320-000
The box should contain these items:
nEasyIP Mixer
nUSB 3.0 cable, type A to type B, 6 ft (1.8 m)
nCat-5e cable, 3 ft (0.9 m)
n3-position Phoenix-style connectors (qty. 6)
nHalf-rack mounting kit
nQuick-Start Guide
5
Installation Guide for EasyIP Systems

EasyIP 10 AV-over-IP PTZ Camera
Worldwide: 999-30200-000 (black), 999-30200-000W (white)
The box should contain these items:
nCamera (black or white)
nVaddio IR Remote Commander
nThin Profile Wall Mount with mounting hardware
nCat-5e cable, 10 ft. (3 m)
nQuick-Start Guide
Caution
When lifting or moving a camera, always support the camera's base. Lifting the camera by its head or
mounting arm will damage it.
6
Installation Guide for EasyIP Systems

EasyIP 20 AV-over-IP PTZ Camera
Worldwide: 999-30230-000 (black), 999-30230-000W (white)
The box should contain these items:
nCamera (black or white)
nVaddio IR Remote Commander
nThin Profile Wall Mount with mounting hardware
nCat-5e cable, 10 ft. (3 m)
nQuick-Start Guide
Caution
When lifting or moving a camera, always support the camera's base. Lifting the camera by its head or
mounting arm will damage it.
7
Installation Guide for EasyIP Systems