VADDIO Zoomshot WallView USB User manual

© 2014Vaddio - All Rights Reserved. ZoomSHOT WallVIEW USB - Document Number 342-0640 Rev B
VADDIO™ZOOMSHOT™ WALLVIEW™ USB
ZoomSHOT HD Camera System featuring the Quick-Connect USB Interface
Model Number 999-6919-000 (North America)
Model Number 999-6919-001 (International)
Installation and User Guide

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 2 of 40
TABLE OF CONTENTS
Overview.................................................................................................................................................................................................................3
Unpacking:..............................................................................................................................................................................................................4
ZoomSHOT Front View with Feature Call-outs..................................................................................................................................................4
Image: ZoomSHOT HD PTZ Camera ..........................................................................................................................................................4
Rear Panel Connections with Feature Call-outs.................................................................................................................................................5
Image: ZoomSHOT HD Camera .................................................................................................................................................................5
Table: ZoomSHOT Dip Switch Settings........................................................................................................................................................5
Table: ZoomSHOT HD VIDEO Selections....................................................................................................................................................5
Quick-Connect USB Interface.................................................................................................................................................................................6
Image: Front Panel with Feature Call-outs ...................................................................................................................................................6
Image: Rear Panel with Feature Call-outs....................................................................................................................................................7
Table: Quick Connect USB Rear Panel Dip Switch Settings........................................................................................................................7
Basic Application Diagrams ....................................................................................................................................................................................8
Diagram: Basic Wiring Configuration - Without Network or PC ....................................................................................................................8
Diagram: Basic ZoomSHOT WallVIEW USB Configuration - USB 2.0 Streaming .......................................................................................9
Diagram: Basic IP Configuration - IP Streaming...........................................................................................................................................9
Diagram: Complex System with Audio........................................................................................................................................................10
Zoom Shot Camera - First Time Set-up................................................................................................................................................................10
Step By Step ZoomSHOT WallVIEW USB Installation Instructions:................................................................................................................11
Quick-Connect USB Details .............................................................................................................................................................................12
Compatibility..........................................................................................................................................................................................................12
Table: Supported UVC Resolutions............................................................................................................................................................13
Internal Web Pages and Control...........................................................................................................................................................................13
DHCP IP Set-up (Dynamic Host Configuration Protocol).................................................................................................................................13
Static IP Set-up:................................................................................................................................................................................................13
Quick-Connect USB Web Pages Tour: ............................................................................................................................................................13
Screen Shot: Login......................................................................................................................................................................................13
Screen Shot: Camera Control Page - No Camera Detected ......................................................................................................................14
Screen Shot: User Menu - Camera Control Page.......................................................................................................................................14
Screen Shot: Admin Log-in.........................................................................................................................................................................15
Screen Shot: Admin Menu - Camera Settings Page...................................................................................................................................16
Screen Shot: Admin Menu - USB 2.0 or IP Streaming Mode Page............................................................................................................17
Screen Shot: Admin Menu - Room Labels..................................................................................................................................................19
Screen Shot: Admin Menu - DHCP Network Configuration........................................................................................................................20
Screen Shot: Admin Menu - Static IP Configuration...................................................................................................................................20
Screen Shot: Admin Menu - Security..........................................................................................................................................................21
Screen Shot: Admin Menu - Diagnostics ....................................................................................................................................................21
Screen Shot: Admin Menu - System Menu.................................................................................................................................................22
Screen Shot: Admin Menu - Update Confirmation......................................................................................................................................22
Screen Shot: Admin Menu - Update in Progress........................................................................................................................................23
Screen Shot: Admin Menu - HELP..............................................................................................................................................................23
Connecting the Camera to the PC and Program of Choice:.................................................................................................................................24
Skype Example:................................................................................................................................................................................................24
VLC Media Player Example:.............................................................................................................................................................................24
General Specifications..........................................................................................................................................................................................25
Compliance and CE Declaration of Conformity - ZoomSHOT..............................................................................................................................26
Compliance and CE Declaration of Conformity, Quick-Connect USB Interface ...................................................................................................27
Warranty Information.............................................................................................................................................................................................28
Appendix 1: Pin-outs for ZoomSHOT Camera and Quick-Connect USB ............................................................................................................29
Table: EZ-POWER VIDEO RJ-45 Connector Pin-outs...............................................................................................................................29
Table: ZoomSHOT Camera RS-232 Port ...................................................................................................................................................29
Table: Quick-Connect USB DE-15 Pin-Out (Analog Component YPbPr)...................................................................................................29
Communication Specification................................................................................................................................................................................30
ZoomSHOT Command List (1/2) .................................................................................................................................................................30
ZoomSHOT Command List (2/2) .................................................................................................................................................................31
ZoomSHOT Inquiry List (1/1).......................................................................................................................................................................32
Appendix 2 - Telnet Serial Command API ............................................................................................................................................................33
Telnet Command List .......................................................................................................................................................................................33

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 3 of 40
O VERVIEW :
The Vaddio ZoomSHOT WallVIEW USB camera system produces
amazing results for small, medium and large room applications.
Anywhere that a Point-of-View or stationary camera can be used
alone or in conjunction with a Vaddio PTZ camera to simplify camera
coverage and preset positioning, the ZoomSHOT is the answer.
Essentially, the ZoomSHOT camera is a low cost pan/tilt/zoom
camera, where the pan and tilt are adjusted manually. However,
unlike fixed-lens stationary cameras, the ZoomSHOT is equipped
with a 19X optical power zoom lens that produces a horizontal field
of view ranging from 58º on the wide end to 3.1º on the tele end in a
HD 16:9 format.
ZoomSHOT was designed from the ground up and uses the Vaddio
EZCamera™ Cat-5 wiring standard for video, power and control.
The ZoomSHOT supports a wide range of video resolutions that are
selectable on the rear panel from 1080p/60 all the way down to
480p/59.94-YPbPr. This camera can deliver HD video signals,
power and control up to 150’ (45.72m) on Cat-5 cable.
This WallVIEW system features the totally robust Quick-Connect
USB Interface, which was designed to have multi-format digital and
analog video outputs, be compatible with all existing and forthcoming
Vaddio cameras and includes USB 2.0 and IP streaming outputs with
a built-in web server for IP control. The QC-USB Interface provides
outputs for the ZoomSHOT camera including; HDMI, YPbPr, USB
Video (UVC standards-MJPEG) and H.264 IP Video (RTSP & HLS).
The QC-USB’s embedded webserver provides for browser-based
access to camera controls, camera presets and basic CCU functions
(color and shading controls) as well as the video configuration web
pages. Analog and HDMI video outputs are included and output the
same video resolution that is sent from the camera simultaneously.
Choose between three (3) IR frequencies for the
Vaddio IR SHOT Commander to allow multiple
cameras to be locally IR controlled with a single
remote control. And like all WallVIEW packages, the
thin profile wall mount is included.
Intended Use:
Before operating the device, please read the entire manual thoroughly. The system was designed, built and
tested for use indoors with the power supply provided. Outdoor operation or use of a different power supply has
not been tested and could damage the device and/or create a potentially unsafe operating condition.
Important Safeguards:
Read and understand all instructions before using. Do not operate any device if it has been dropped or damaged.
In this case, a Vaddio technician must examine the product before operating. To reduce the risk of electric shock,
do not immerse in water or other liquids and avoid extremely humid conditions.
Use only the power supply provided with the system. Use of any unauthorized
power supply will void any and all warranties.
Please do not use “pass-thru” type RJ-45 connectors. These pass-thru type connectors do not
work well for professional installations and can be the cause of intermittent connections which
can result in the RS-232 control line failing and locking up, and/or compromising the HSDS (high
speed differential) signals. For best results please use standard RJ-45 connectors and test all
cables for
p
ro
p
er
p
in-outs
p
rior to use and connection to Vaddio
p
roduct.
Image: ZoomSHOT HD Camera
Image: ZoomSHOT Rear Panel
Image: Quick-Connect USB Interface

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 4 of 40
Save These Instructions:
The information contained in this manual will help you install and operate your product. If these instructions are
misplaced, Vaddio keeps copies of Specifications, Installation and User Guides and most pertinent product
drawings for the Vaddio product line on the Vaddio website. These documents can be downloaded from
www.vaddio.com free of charge.
U
NPACKING :
Carefully remove the product and all of the included parts from the packaging.
Identify the following parts for each camera:
ZoomSHOT WallVIEW USB Camera System (North America):
Part Number: 999-6919-000
One (1) ZoomSHOT HD Camera (998-6919-000)
One (1) Vaddio IR Shot Commander Remote
One (1) Quick-Connect USB Interface (998-1105-038)
One (1) 24 VDC, 2.0 A Power Supply with Power Cord for North America
One (1) 6’ (1.83m) USB Type-A to Type-B Cable (Black)
One (1) Thin Profile Wall Mount with Mounting Hardware
One (1) EZCamera Cat-5 Control Adapter (RJ-45-F to DB-9-F)
Documentation
ZoomSHOT WallVIEW USB Camera System (International):
Part Number: 999-6919-001
One (1) ZoomSHOT HD Camera (998-6919-000)
One (1) Vaddio IR Shot Commander Remote
One (1) Quick-Connect USB Interface
One (1) 24 VDC, 2.0 A Power Supply
One (1) 6’ (1.83m) USB Type-A to Type-B Cable (Black)
One (1) Euro Power Cable
One (1) UK Power Cable
One (1) Thin Profile Wall Mount with Mounting Hardware
One (1) EZCamera Control Adapter (RJ-45-F to DB-9-F)
Documentation
ZoomSHOT Front View with Feature Call-outs
Image: ZoomSHOT HD PTZ Camera
1) Lens: 19X Optical Zoom Lens
2) IR Sensor and Power/Tally LED: The IR sensor for the IR SHOT Commander Remote is located here. In a
separate opening, a blue LED power light and a red LED tally resides (it turns purple on boot up too).
3) The Yoke: For manual pan and tilt. Tilt range is ± 30° and Pan is limited to the service loop of the cabling.
4) The Aluminum Base and Steel Cylindrical Body: Please don’t drop it on your foot, it’s fairly substantial.
5) Logo: Really Cool Logo Badge (RCLB). The RCLB is affixed to the base in a recessed ovoid area.
①
②
③④
⑤

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 5 of 40
Rear Panel Connections with Callouts
Image: ZoomSHOT HD Camera
1) RS-232 & IR Out: The RS-232 accepts modified VISCA protocol for camera control, as well as transmits IR
signaling received by the front IR receiver, which can be transmitted to third party devices. The ZoomSHOT will
not react to the remote if the IR is off. IR forwarding is only available in the SR Quick-Connect models.
2) EZ Power/Video Port:
This RJ-45 connector is only used with the Quick-Connect SR, Quick-Connect DVI-D/HDMI SR Interface, Quick-
Connect USB and USB Mini Interfaces to supply power and return HSDS (differential) video from the camera
over Cat-5 cable up to distance of 150’ (45.72m).
3) ZoomSHOT Dip Switch Settings:
Settings for IR remote frequency, IR receiver on/off, image flip, test bars and Defaults can be configured on these
switches. See the Switch Settings page for additional information. The dip switch settings are as follows:
Table: ZoomSHOT Dip Switch Settings
4) HD Video Select:
A rotary switch allows the user to choose the component HD output video resolution and format. After setting or
changing the resolution, reboot the camera to ensure proper operation. If an unassigned rotary selection position
is chosen (3, 9, A, B, C or D), the camera will output a medium grey video privacy mask. Simply set the rotary
switch to an assigned position to output video. The HD Video Select Rotary Switch Settings are as follows:
Table: ZoomSHOT HD VIDEO Selections
Dip Switch Function
1 Up = IR1, Down = IR2
2 Up = IR 1 or 2, Down = IR3
3 Up=IR ON, Down = IR OFF
4 Up = Normal Image, Down = Image Flip
5 Test Bars
6 Update Position - Leave UP unless updating firmware
All Down Reset to Defaults - with power cycle
Rotary Resolutions Rotary Resolutions
0 720p/59.94 8 576p/59.94
1 1080i/59.94 9 --
2 1080p/59.94 A --
3 -- B --
4 720p/50 C --
5 1080i/50 D --
6 1080p/50 E 1080p/29.97
7 480p/59.94 F 1080p/25
①
②
③④
Notes:
1) For IP or USB 2.0 Streaming, use
position “0” (720p/59.94) for best results
2) Set the rotary switch to an assigned
position. A medium grey privacy mask is
displayed on unassigned positions.
Point the notch in
the switch stem to
assign the rotary
position

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 6 of 40
Q UICK -C ONNECT USB I NTERFACE
Image: Front Panel with Feature Call-outs
1) LCD Blue Backlit Display:
20 x 2 Character, ODV (omni-directional view), ABN (advanced black nematic) display with a high contrast
and wide viewing angle combined with high visibility. The MAC address (labeled as “HW” for hardware) is on
the top line, and the IP address (static or DHCP) is listed on the bottom line. This display with IP and MAC
addresses allows for easy access to the embedded web server and Vaddio camera settings for the PC or
BYOD (bring your own device - laptop or tablet) users of UC conference systems. Upon power up or power
reset this display will indicate when the unit is in initialization mode.
2) Power/ System Reset Switch:
The System Reset switch on the front panel is a blue back lit-tactile switch that will illuminate when power is
present at the rear power connector. Pressing in and holding this switch for 1.15643 seconds will
restart/reinitialize the Quick-Connect USB Interface.
3) NETWORK LED:
The green panel mount LED indicator will indicate the presence of an Ethernet connection. This LED will
blink to indicate network activity. If no network connection is made, the LED will remain off.
4) USB LED:
The blue panel mount LED indicates the presence of a USB connection to a PC (or mac). Blinking will
indicate USB activity. If no USB connection is present the LED will remain off.
①
②
④
③

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 7 of 40
Quick-Connect USB Interface
Image: Rear Panel with Feature Call-outs
1) Power Input: 5.5mm OD x 2.5mm ID coaxial connector for the provided 24 VDC, 2.0 Amp switching power supply. The
Quick-Connect USB Supplies Power to the attached camera.
2) 5-Position Dip Switch: A 5-position dip switch allows the user to choose the HD video color space (YCbCr for HDMI and
sRGB color space for DVI-D) on the HDMI output, configure for updates, and restore factory defaults when cycling power.
Table: Quick Connect USB Rear Panel Dip Switch Settings
3) RS-232 IN: Serial RS-232 input on a RJ-45 connector. This control port allows a Vaddio joystick controller or 3
rd
party
controller (Crestron/AMX) to control the camera functions if the embedded webserver is not used for real time control.
4) RS-232 OUT TO CAMERA: Serial RS-232 output on RJ-45 connects via Cat-5 to the camera RS-232 input on the
camera. Control signals from the embedded webserver are sent or external controller are relayed to the camera over this
control port.
5) EZ POWER VIDEO: RJ-45 jack used to supply 24 VDC power to the camera and return differential video from the camera
on Cat-5 cable at a maximum distance of 150’ (45.7m).
6) YPbPr Output: Analog component video output on a DE-15 (HD15) connector (resolution is set on the back of the
camera). The YPbPr output resolution will be the same as the HDMI output resolution. SD video resolutions (Y/C and
CVBS formats) are not supported by the Quick-Connect USB Interface; however some progressive frame analog
component SD video is supported.
7) HDMI Output: The digital video output on the HDMI connector can either be YCbCr color space (normal HDMI mode) or
can be changed to DVI-D color space (sRGB) for older monitors and devices. The HDMI and YPbPr outputs work
simultaneously and are the same resolution (set at the camera).
8) Ethernet 10/100 Network RJ-45 Jack: The Ethernet jack will have yellow and green lights to indicate connectivity and
activity of the network on that jack. The Ethernet jack will stream video up to 1080p/30 using H.264 compression and can
be set from the internal web pages much like the HD-USB Camera. The resolutions will available in a three (3) stage
quality format (High Quality, Good Quality and Standard Quality targets) and includes a range of CIF to 1080p/30.
9) USB 2.0 Connector: The USB 2.0 is on a Type-B female jack and connects to a PC running a soft-client video
conferencing system or video capture software that uses UVC (USB Video Class) standard drivers. No other USB 2.0
drivers are required to plug the QC-USB into a computer and have it work. The UVC drivers will auto negotiate the top
resolution that the PC and QC-USB can accomplish together and auto-implement that resolution.
Dip Switch Function Default Activation
1 Future Use Up n/a
2 Future Use Up n/a
3 Color Space HDMI Connector Up = HDMI (YCbCr) Down = DVI (sRGB)
4 Program / Update UP = No Program DOWN = Ready To Program
5 Future Use Up n/a
All Down Reset to Defaults All UP ALL DOWN (with power cycle)
①
②
④
③ ⑥
⑤
⑦
⑨
⑧

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 8 of 40
B ASIC A PPLICATION D IAGRAMS
Diagram: Basic Wiring Configuration - Without Network or PC
`
Cat-5 Cable for
RS-232 Control
(Zoom and CCU
Functions)
Quick-Connect
USB Interface
Rear Panel
Cat-5 Cable for
Power and Video
(EZ-POWER VIDEO)
24VDC, 2.0 A
Power Supply
HD Monitor
(Simulated HD Video Feed)
ProductionVIEW Precision Camera Controller
Note: RS-232 can be run directly to the ZoomSHOT or
through the Quick-Connect USB in this configuration
← HD Video
(
HSDS differential
)
Powe
r
→
ZoomSHOT
HD Camera
Rear View
RS-232
Control
HDMI
Video

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 9 of 40
Diagram: Basic ZoomSHOT WallVIEW USB Configuration - USB 2.0 Streaming
Diagram: Basic IP Configuration - IP Streaming
ZoomSHOT HD Camera to Quick-Connect USB out to Network for a remote network application.
(45.72)
USB 2.0 - MJPEG Video using
Standard UVC Drivers
Host PC with
UC Application
Cat-5 Cables up to 150’ (45.72m)
ZoomSHOT
HD Camera
PC with
Browser for
Control
Network
Client
(Video)
Ethernet
Network
Power to Camera >
< HD Video to QC-USB
IP (H.264) Streaming
RTSP or HLS Ethernet
Two (2) Cat-5 Cables carry
Power, Video and Control
Signals
HDMI Video Monitor
Simulated Video Feed
USB 2.0 Cable
Quick-Connect
USB Interface
ZoomSHOT HD
V
ideo Camera
Two (2) Cat-5 Cables for
Power, Video and Control
Distance up to 150’ (45.72m)
Quick-Connect USB
Interface
HDMI
Cable

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 10 of 40
Diagram: Complex System with Audio
Local USB 2.0 streaming with Ethernet control, active UC Application and local audio system.
ZoomSHOT WallVIEW USB System with Audio
Z OOM S HOT C AMERA - F IRST T IME S ET - UP
The ZoomSHOT was designed to be very easy to use and operate. There is
documentation at the back of this manual for pin-outs for the connectors on the
Zoom SHOT camera and the Quick-Connect USB Interface.
Before Installing the Camera:
Choose the ZoomSHOT camera mounting location while paying close attention
to camera viewing angles, lighting conditions, possible line of site obstructions
and checking for in-wall obstructions where the camera is to be mounted.
Always pick a mounting location that will optimize the performance of the
camera. Please locate the camera to enable easy positioning of the camera
body with the ability to point down and away from the ceiling and a pile of
fluorescent lighting cells. Cameras generally don’t like to be swamped with
fluorescent light and nobody sits on the ceiling anyway.
The Thin Profile Wall Mount for the ZoomSHOT can be mounted directly to a 1-gang wall box or can be
mounted using two (2) provided spiral dry wall anchors.
For Power/Video and RS-232 signals, use standard Cat-5 cable (568B termination and real RJ-45
connectors) from the EZ-POWER VIDEO and RS-232 ports on the back of the ZoomSHOT to the Quick-
Connect USB Interface. The EZ-POWER VIDEO jack on the camera is marked in red as a reminder that
there is 24 VDC power on that Cat-5 cable.
ZoomSHOT HD
Camera
PC “B” with Browser for
Control and UC
Application to connect to
PC “A” on other side
Ethernet
Ethernet Network
Video, Power
and Control
Two Cat-5
Cables
Up to 150’
(
45.72m
)
Ethernet IP Control
from either PC
USB 2.0
UVC Video
Legend
USB UVC Video
USB UAC Audio
IP Web Page Control
UC Application
Ceiling
Speakers
8 Ohm
8 Ohm
Cat-5 Cat-5
EasyUSB
Mixer/Am
p
USB 2.0
UAC Audio
Local Audio System with AEC
Mics, Mixer/AMP and Speakers
AEC Mics
(EasyMics)
PC “A” with Browser for Control
and UC Application to connect
to PC “B” on other side
Quick-Connect
USB Interface
A
B
Image: ZoomSHOT HD
Camera with provided
Thin Profile Wall Mount

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 11 of 40
Step By Step ZoomSHOT WallVIEW USB Installation Instructions:
Step 1: After determining the optimum location of the camera; route, mark and test
the two (2) Cat-5 cables from the camera to the Quick-Connect USB Interface
located at the head-end. The two Cat-5e cables should feed-through the hole
located on the rear flange of the Thin Profile Wall Mount. If the bracket is to be
mounted on a 1-gang wall box, use the screws supplied with the wall box cover plate
to attach the Thin Profile Wall Mount. If mounting to the drywall with wall anchors,
use two (2) quality wall anchors. The mount provides for easy leveling. Pull the cat-5
cables though the wall and feed the cables through the back of the mount. Level the
mount and tighten the mounting screws.
Step 2:
Using the HD VIDEO SELECT rotary switch and CAMERA SETTINGS dip switches on the back of the camera,
set up the camera’s output resolution and functional preferences. There are tables on Page 5 that identify the
choices… keep these tables handy for future use…or you can easily look them up on the Vaddio website
(vaddio.com) when needed.
Setting the ZoomSHOT Camera:
Set the desired HD Resolution with the rotary selection switch. If changing the resolution, always reboot
the camera to ensure proper operation.
Note: Use 720p/59.94 (position “0”) for best results for streaming USB 2.0 (MJPEG) or IP Video (H.264)
Set the IR frequency (1, 2 or 3) of the camera (if it is to respond to the IR remote control).
Set the desired image orientation (normal or flipped).
Step: 3: Follow the sample wiring diagram for connecting the Cat-5 cables to the ZoomSHOT and Quick-
Connect USB Interface (Diagram on the Page 8, but read and understand the rest of these instructions especially
the next note).
NOTE: Check all Cat-5 cables for continuity in advance of the final connection. Label the
Cat-5 cables. Plugging the EZ POWER VIDEO cable into the wrong RJ-45 may cause
damage to the camera system and void the warranty. For premise cabling, please use real
RJ-45 connectors and crimpers. Please don’t use the pull through or EZ type of RJ-45.
Step 4: Place the camera onto the camera mount and use the provided ¼”-20 screws to secure the camera to
the mount. To dress the cabling, push the extra cable back into the wall opening.
HINT: A small piece of black fabric or felt attached to the back of the mount (wall-side) with a small slit to allow
cables through, or dressing the wall opening drywall edge with black tape to mask the white gypsum wall board
may help the overall dressing of the mount and cables.
Step 5: Connect the Vaddio 24 VDC, 2.0 Amp power supply to a power outlet and to the Quick-Connect USB
Interface. The Quick-Connect USB will initialize, power will travel down the EZ-POWER VIDEO Cat. 5 cable to
the camera. The camera will boot up and in a few seconds, differential HD video will travel back down the Cat-5
cable to the Quick-Connect. When an image is available, the camera is ready to accept control information from
the IR Shot Commander remote control or RS-232 camera controller. If connected to the Network, the Quick-
Connect USB will display the Hardware (HW) MAC Address and the IP addresses.
Controlling the ZoomSHOT:
IR Remote: The IR Shot Commander Remote control can control the camera’s basic functions and enter the
OSD (on-screen display) for more advanced controls.
RS-232 Control: An API is provided for control of the camera over RS-232 (commands in the back of manual).
Telnet Control: The camera can be controlled through the Quick-Connect USB via Telnet session. These
exciting commands are listed at the back of the manual.
Built-in Webserver Control: The Quick-Connect USB has a built-in webserver that auto-loads the control
protocols of the Vaddio camera attached (pretty cool huh?). Full camera controls including CCU image controls
are available from any approved browser on any computer. The IP address is always displayed on the front
panel display of the Quick-Connect so access to the internal webpages is super easy.

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 12 of 40
Quick-Connect USB Details
The Quick-Connect USB interface is a Cat-5 camera interface and an IP or USB 2.0 streaming appliance with a
built-in webserver for camera set-up and control. The Quick-Connect USB Interface uses UVC (Universal Video
Class) drivers for USB 2.0 video and does not require the loading of any other drivers to run on the PC. As long
as the operating systems and soft-client software support UVC drivers, no additional software/drivers, other than
the application is required.
COMPATIBILITY
The Quick-Connect USB will work with the following web browsers, soft codecs,
computer operating systems and media players:
Compatibility - Web Browsers:
1) Internet Explorer (IE 8 and above)
2) Safari (Rev 4 and 5)
3) Safari/iOS (Rev 4 and 5)
4) Chrome (the latest and current release - auto updating)
5) Firefox (the latest and current release - auto updating)
Soft Client Compatibility: The Quick-Connect USB is compatible with the following soft codecs or applications,
in no particular order:
1) Skype Win 7 & Mac OS X (10.7)
2) Web Ex (WBS 28.7 and up) Win 7 & Mac OS X
3) Microsoft Lync Win7
4) Cisco Jabber Win 7 & Mac OS X
5) Vidyo Desktop Win 7 & Mac OS X
6) Google Plus Win 7
7) Adobe Connect 8 Win 7 & Mac OS X
8) LifeSize ClearSea Win 7
9) GoToMeeting (Citrix) Win 7 & Mac OS X
10) Polycom M100 Win7
11) Panaopto (lecture capture) Win 7
Compatibility: Media Players:
The UVC with MJPEG and IP with H.264 video are compatible with the industry leading PC media players.
Quick-Time 10.2
VLC Media Player 2.0.4
Real Player 16.0
Compatibility: Operating Systems
Apple OS X (10.7 and above)
Windows XP w/Service Pack 3 with known issues and errata
Windows 7
Linux
Evolving Compatibilities:
As more UC soft-client and lecture capture programs are released and gain popularity, Vaddio will provide a
continuing research and development effort to ensure the compatibility with other manufacturer’s products.

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 13 of 40
Compatible with USB 2.0 UVC Drivers
The USB 2.0 UVC (Universal Video Class) video driver resolution table is an internal list of resolutions available
for the Host PC and the Quick-Connect USB to negotiate and use for any approved/tested USB application.
Typically, the highest resolution possible between both the PC and Quick-Connect USB is used. However, not all
OS and application combinations are altogether typical.
Table: Supported UVC Resolutions
Format Resolution Frame Rate Aspect Ratio
MJPEG 1280 x 720 15/30 16:9
960 x 544 15/30 16:9
704 x 576 15/30 4:3
640 x 480 15/30 4:3
640 x 360 15/30 16:9
424 x 240 15/30 4:3
352 x 240 15/30 4:3
320 x 240 15/30 4:3
320 x 180 15/30 16:9
I
NTERNAL W EB P AGES AND C ONTROL
The internal web pages will allow control of the Quick-Connect USB and control of the attached camera via a
network connection. These web pages will allow the user or administrator to set security passwords, change the
IP address, view diagnostics, access the firmware upgrade page and more!
DHCP IP Set-up (Dynamic Host Configuration Protocol)
DHCP Set-up (skip this section if Static IP). If the LAN has a DHCP (dynamic host configuration protocol) server, then the IP address,
gateway and routing information will automatically be assigned. The QC-USB software is defaulted to DHCP and will attempt to dynamically
obtain an IP address using DHCP, but it will fall back to the default address of 169.254.1.1 if no DHCP server can be found.
Static IP Set-up:
The static IP can be assigned either through the network or directly with a computer using a cross-over cable. Depending on the age of the
computer, you may not need a cross-over cable. Either way the steps are the same for network or direct connection to a computer. The
default address of the QC-USB camera is 169.254.1.1 and the Subnet mask is 255.255.0.0. Different computer OS types all have their own
way of doing things (without question), but they are essentially doing the same stuff, changing the IP address so the web pages of the HD-
USB are accessible
.
Quick-Connect USB Web Pages Tour:
Screen Shot: Login
The QC-USB web server is intended as a user’s camera control page at one level, and an administrator’s
management tool at another level, which requires password authentication for access.
The Login Page will appear if there is a username assigned by the administrator. Assigning a username can limit
access to the admin menus by a general user. By default, the username is blank and the password for the user
account is: password. The Administrator can set the name and password for the user account. If no username
is assigned, the web page will automatically open to the Camera Control page.
Defaults:
Username is blank
(assigned by admin)
Password is: password
Admin name is: admin
Password is: password

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 14 of 40
Screen Shot: Camera Control Page - No Camera Detected
The No Camera Detected window will appear if the Quick-Connect USB has no communication with the camera.
Check the camera power and serial connections if no camera is found within 30 seconds of initialization.
Screen Shot: User Menu - Camera Control Page
1) Zoom and Home Controls: The camera’s zoom lens can be controlled with the “+” to zoom-in and the “-“ to
zoom-out the ZoomSHOT camera. The home button will move the camera to the home zoom position.
2) Zoom Speed Control: The speed for both the Zoom control can be adjusted between two speeds; Fast
Zoom and Slow Zoom. For tighter shots, it is recommended that the slower speed is used.
➊
➍➌
➋
➎
➏
➐

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 15 of 40
3) Store Preset Button: Clicking the Store button opens up a Store Preset pop-up dialog box. To set presets,
set up the camera shot, click on choice of preset number (1 through 6). The preset is stored and the dialog
box closes.
4) Camera Presets: Six (6) presets can be recalled simply by clicking a preset number.
5) CCU Scenes: The user has access to the CCU scenes set and stored by the Admin. There are three (3)
user definable presets and six (6) presets preconfigured by the technical folks at Vaddio (really Scott set them
all) that are meant to be used in certain lighting scenarios. These lighting presets included: Automatic,
Incandescent Hi, Incandescent Lo, Fluorescent Hi, Fluorescent Lo and Outdoor.
6) Administration Menu: By clicking on the Administration menu bar, the Admin Login screen will appear. The
default Admin password is: password
7) Vertical: The vertical button will reduce the size of the window for
the user controls and remove the menu tabs on the left side of the
screen. The vertical sizing works well when using it with a soft-client
codec. Click on ‘Full’ for full screen size camera control web pages.
Screen Shot: Admin Log-in
By selecting the Admin Menu Bar, the Admin Login password pop-up window will appear and await the entry of
the password. By entering the Admin menus, 10 more menu keys appear on the left side of the screen.
Default:
Admin Account
Password is:
password
Image:
Reduced window size
for camera control to be
used while a UC
application is open

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 16 of 40
Screen Shot: Admin Menu - Camera Settings Page
The Camera Settings page provides the parameters to allow the end user to match the camera to the
environment, set the CCU presets and make startup assignments.
1) Load Preset at Startup: Check this box to move the camera to a predefined preset location when the
camera powers up. Use the pull down menu to select the Preset 1 through 6 to be loaded when this box is
checked
2) Load CCU Scene at Startup: Check this box to load a CCU Scene into the camera when the camera
powers up. The pull down menu will allow the selection of one of the 6-factory scenes, or any of the 3-user
defined scenes.
3) CCU Scenes: Click on any of these 9 buttons to load one of the CCU scenes into the camera. These
Scenes can be fine-tuned if changes are needed, and stored into any of the three User defined scenes.
4) Color Settings: When painting or shading camera scenes for specific lighting situations or environments,
these attributes can be adjusted for matching cameras in the same area. The parameters within the Color
Settings section are defined below (top to bottom):
Auto Iris check box: When checked, the camera will operate in Auto Iris mode, when unchecked, the
camera will be in Manual Iris mode and allow adjustment of Iris and Iris Gain levels
➊➋
➌
➍
➎

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 17 of 40
Iris: Move adjustment slider as required to adjust the iris opening. A numeric value will be displayed in
the box to the right of the slider.
Gain: Move adjustment slider as required for amount of iris gain desired. Numeric value will be
displayed in the box to the right of the slider.
Auto White Balance check box: When checked, the camera will operate in Auto White Balance mode,
when unchecked, the camera will be in Manual White Balance Mode and allow for adjustment of Red and
Blue Gain.
Red Gain: Move the adjustment slider as required for amount of Red Gain desired. A numeric
value will be displayed in the box to the right of the slider.
Blue Gain: Move the adjustment slider as required for amount of Blue Gain desired. Numeric
value will be displayed in the box to the right of the slider.
Back Light Compensation: When checked, Back Light Compensation will be applied to the camera if
BLC is supported by the camera and the camera is in Auto White Balance mode.
Detail: Move the adjustment slider as required for amount of detail (Aperture) desired. A numeric value
will be displayed in the box to the right of the slider. Note: If the detail is too high, the video can look
grainy and appear noisy.
Chroma: Move the adjustment slider as required for the amount of Chroma (Color Vibrancy) desired. A
numeric value will be displayed in the box to the right of the slider.
Store CCU Scene button: Once the desired scene adjustments have
been made, this button will activate a pop-up menu that can be used to
store this scene into one of the three User Defined Scene locations.
These User Defined Scenes can be named as required for clarity.
These User Defined CCU Scenes can be adjusted and re-saved at any
time.
5) Custom CCU Scene Labels: The labels for the (3) User Defined customizable Scenes can be changed as
needed. Mouse the cursor into the appropriate window and edit the text. Press Save to store these changes
or press Cancel to exit this window.

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 18 of 40
Screen Shot: Admin Menu - USB 2.0 or IP Streaming Mode Page
1) Streaming Mode: Streaming can be set for either USB 2.0 streaming (MJPEG) or IP streaming (H.264); but not both at
the same time. The QC-USB can stream USB and accept IP control, or it can IP stream with IP control. Choose the
streaming mode here.
2) USB Device Name: Allows the user to use a “friendly name” per system. In a BYOD format, the user has the ability to
move between different UC conference rooms and have the ability to assign the PC’s USB resources to that room.
3) Color Space: The UVC drivers will negotiate the color depth, but this parameter allows the user to reduce the color depth
to 4:2:0, which is used with the older/cheaper webcams and applications, where image quality is not as critical. The 4:2:2
color is used by many applications that take advantage of the performance of the camera where the colors are more
vibrant and precise.
4) IP Streaming Settings: The Video Settings allow the selection of the target performance for the IP Streaming. The QC-
USB is set up for a variable bit rate and the user can select the video resolution and the quality, such as High Quality
(Best), Standard Quality (Better) and Low Bandwidth (Good). Every effort to eliminate stupefyingly bad combinations with
the 5 or 6 parameters that make up the image size, quality, bit rate, bandwidth etc… has been made, so you can’t pick
1080p at a bit rate of 128Kbps, which would look totally wicked awful - and probably wouldn’t work anyway.
5) Streaming Protocol and URL: Admin chooses the streaming type and the port number for RTSP. The HLS port is
always on 80. The supported protocols are RTSP and HLS (Apple’s HTTP Live Streaming). RTSP is best for live
applications, where HLS serves the Apple iOS devices and is better for playback due to the amount of buffering the HLS
has built-in. The Streaming URL auto populates and that path can be changed.
When finished setting up the streaming parameters click Save to put the changes into effect or cancel, which will not save
the configuration.
➊
➍
➌
➋
➎

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 19 of 40
Screen Shot: Admin Menu - Room Labels
The Room Labels menu allows the administrator to label the company name, room name, room phone and help
phone on a per QC-USB basis. The labels appear on every page at the top/middle of the page. Simply enter the
room information and click Save.

ZOOMSHOT WallVIEW USB Camera System
ZoomSHOT WallVIEW USB System Document Number 342-0640 Rev. B Page 20 of 40
Screen Shot: Admin Menu - DHCP Network Configuration
Under the Networking menu, The Network Configuration and Network Interfaces are displayed. This is where the
Network administrator assigns either DHCP or a Static address and the associated parameters.
Screen Shot: Admin Menu - Static IP Configuration
If Static IP is used, the IP Address, Subnet Mask and Gateway are manually entered. Click on Save to keep the
Static IP information.
MAC Address, IP
Address, Subnet Mask
and Gateway will Auto-
fill when in DHCP Mode
IP Address, Subnet
Mask and Gateway are
entered into the system
manually for Static IP