Vaisala Indigo500 Series User manual

M212287EN-N
User Guide
Indigo500 Series Transmitters
Indigo510, Indigo520

PUBLISHED BY
Vaisala Oyj
Vanha Nurmijärventie 21, FI‑01670 Vantaa, Finland
P.O. Box 26, FI‑00421 Helsinki, Finland
[phone]
www.vaisala.com
docs.vaisala.com
© Vaisala 2022
No part of this document may be
reproduced, published or publicly
displayed in any form or by any means,
electronic or mechanical (including
photocopying), nor may its contents be
modified, translated, adapted, sold or
disclosed to a third party without prior
written permission of the copyright holder.
Translated documents and translated
portions of multilingual documents are
based on the original English versions. In
ambiguous cases, the English versions are
applicable, not the translations.
The contents of this document are subject
to change without prior notice.
Local rules and regulations may vary and
they shall take precedence over the
information contained in this document.
Vaisala makes no representations on this
document’s compliance with the local
rules and regulations applicable at any
given time, and hereby disclaims any and
all responsibilities related thereto.
This document does not create any legally
binding obligations for Vaisala towards
customers or end users. All legally binding
obligations and agreements are included
exclusively in the applicable supply
contract or the General Conditions of Sale
and General Conditions of Service of
Vaisala.
This product contains software developed
by Vaisala or third parties. Use of the
software is governed by license terms and
conditions included in the applicable
supply contract or, in the absence of
separate license terms and conditions, by
the General License Conditions of Vaisala
Group.
This product may contain open source
software (OSS) components. In the event
this product contains OSS components,
then such OSS is governed by the terms
and conditions of the applicable OSS
licenses, and you are bound by the terms
and conditions of such licenses in
connection with your use and distribution
of the OSS in this product. Applicable OSS
licenses are included in the product itself
or provided to you on any other applicable
media, depending on each individual
product and the product items delivered
to you.

Table of contents
1. About this document.....................................................................................9
1.1 Version information.......................................................................................... 9
1.2 Related manuals..............................................................................................10
1.3 Documentation conventions..........................................................................10
1.4 Trademarks........................................................................................................11
2. Product overview...........................................................................................12
2.1 Introduction to Indigo500 Series Transmitters............................................12
2.1.1 Probe compatibility..................................................................................12
2.2 Indigo500 basic features and options.......................................................... 12
2.3 Indigo500 transmitter parts.......................................................................... 14
2.3.1 Cable gland and conduit options........................................................... 15
2.4 Touchscreen display........................................................................................ 17
2.5 LED indicator (non-display transmitter)...................................................... 18
2.6 Web interface...................................................................................................18
2.7 Output options................................................................................................ 19
2.7.1 Analog outputs.........................................................................................19
2.7.2 Digital output............................................................................................19
2.7.3 Relays....................................................................................................... 20
2.8 Analog input................................................................................................... 20
2.9 BARO-1 barometer module............................................................................ 21
2.10 Data logging....................................................................................................22
2.11 Ethernet connection.......................................................................................23
2.12 Safety...............................................................................................................24
2.12.1 ESD protection........................................................................................ 26
2.13 Regulatory statements.................................................................................. 26
2.13.1 FCC Part 15 compliance statement....................................................... 26
2.13.2 Canada ICES-003 compliance statement............................................ 27
3. Installation....................................................................................................... 28
3.1 Opening and closing transmitter cover....................................................... 28
3.2 Mounting..........................................................................................................28
3.2.1 Standard wall mounting......................................................................... 29
3.2.2 Wall mounting with adapter plate........................................................30
3.2.3 DIN rail mounting.................................................................................... 32
3.2.4 Pole mounting......................................................................................... 33
3.3 Wiring...............................................................................................................35
3.3.1 Power supply terminals and lead-through − PELV option................. 35
3.3.2 Power supply terminals and lead-through − AC (mains)
power option........................................................................................... 36
3.3.3 Relay output terminals and lead-through............................................38
3.3.4 Analog output terminals and lead-through.........................................39
3.3.5 Analog input terminals and lead-through...........................................40
3.3.6 Ethernet connector and lead-through................................................. 42
3.3.7 Probe connection terminals and lead-throughs................................. 43
3.3.8 Verifying tightness of cable glands...................................................... 44
Table of contents
3

3.4 Connecting probes.........................................................................................44
3.4.1 Temperature compensation...................................................................46
4. User interfaces............................................................................................... 47
4.1 Touchscreen display and main views...........................................................47
4.1.1 Graph data statistics...............................................................................50
4.2 Web interface and main views.......................................................................51
5. Start-up.............................................................................................................53
5.1 Starting up transmitter using touchscreen display.................................... 53
5.1.1 Configuring network connection on touchscreen.............................. 54
5.1.2 Setting date and time on touchscreen................................................. 56
5.1.3 Configuring units on touchscreen......................................................... 57
5.1.4 Configuring screen lock on touchscreen..............................................58
5.2 Starting up transmitter using web interface................................................ 61
5.2.1 Connecting to web interface...................................................................61
5.2.2 Connecting to web interface with a direct connection
between transmitter and computer......................................................62
5.2.3 Creating web interface users................................................................. 63
5.2.4 Logging in to web interface...................................................................65
5.2.5 Changing language in web interface....................................................66
5.2.6 Configuring network connection in web interface............................. 66
5.2.7 Setting date and time in web interface................................................ 68
5.2.8 Configuring units in web interface........................................................70
5.2.9 Finishing start up.................................................................................... 70
5.2.10 Resetting PIN code in web interface......................................................71
6. Configuring transmitter using touchscreen display.......................73
6.1 Accessing configuration menu......................................................................73
6.2 Configuring home views on touchscreen.................................................... 73
6.3 Configuring analog outputs on touchscreen.............................................. 75
6.3.1 Analog output configuration example................................................. 78
6.3.2 Testing analog outputs on touchscreen............................................... 78
6.4 Configuring analog input on touchscreen...................................................79
6.5 Configuring relays on touchscreen.............................................................. 80
6.5.1 Relay configuration example.................................................................. 81
6.5.2 Relay wiring and relay activation mode................................................ 81
6.5.3 Relay hysteresis....................................................................................... 82
6.6 Enabling Modbus TCP/IP on touchscreen................................................... 83
6.7 Disabling temperature compensation on touchscreen............................. 83
7. Configuring transmitter using web interface....................................84
7.1 Configuring web interface home view.........................................................84
7.2 Configuring analog outputs in web interface............................................. 85
7.2.1 Testing analog outputs in web interface..............................................86
7.3 Configuring analog input in web interface..................................................88
7.4 Configuring relays in web interface............................................................. 89
7.4.1 Testing relays in web interface............................................................... 91
Indigo510, Indigo520 User Guide M212287EN-N
4

7.5 Enabling Modbus TCP/IP in web interface.................................................. 92
7.6 Disabling temperature compensation in web interface.............................92
7.7 Exporting logged data...................................................................................93
8. Modbus............................................................................................................. 94
8.1 Modbus overview........................................................................................... 94
8.2 Unit identification of transmitter and probes.............................................94
9. Maintenance and troubleshooting........................................................ 96
9.1 Cleaning...........................................................................................................96
9.2 Replacing probes........................................................................................... 96
9.3 Updating transmitter software version........................................................97
9.4 Restoring factory default settings............................................................... 99
9.5 Troubleshooting........................................................................................... 100
10. Technical data.............................................................................................. 103
10.1 Indigo510 specifications.............................................................................. 103
10.2 Indigo520 specifications..............................................................................105
10.3 Compatible probes and devices.................................................................. 110
10.4 Spare parts and accessories.........................................................................110
10.5 Recycling..........................................................................................................111
Appendix A: Modbus reference..................................................................113
A.1 Unit IDs............................................................................................................ 113
A.2 Function codes............................................................................................... 113
A.3 Device identification objects........................................................................ 113
A.4 Modbus registers............................................................................................114
A.4.1 Measurement data registers..................................................................114
A.4.2 Status registers....................................................................................... 115
A.5 Modbus communication examples.............................................................. 117
Index.................................................................................................................. 119
Maintenance and calibration services........................................................121
Warranty........................................................................................................... 121
Technical support............................................................................................121
Table of contents
5

List of figures
Figure 1 Indigo520 transmitter parts......................................................................... 14
Figure 2 Indigo510 transmitter parts, non-display version...................................15
Figure 3 Indigo520 cable gland and conduit options, example
configurations...................................................................................................16
Figure 4 Indigo510 cable gland options, example configurations...................... 17
Figure 5 Indigo520 with optional BARO-1 barometer module,
example configuration....................................................................................21
Figure 6 Example of logged data................................................................................23
Figure 7 Standard wall mounting................................................................................29
Figure 8 Transmitter mounting dimensions.............................................................30
Figure 9 Wall mounting with adapter plate.............................................................. 31
Figure 10 Adapter plate dimensions............................................................................. 31
Figure 11 Attaching DIN rail clip fasteners................................................................. 32
Figure 12 Attaching mounting plate to fixing brackets - vertical
pole mounting..................................................................................................33
Figure 13 Attaching transmitter to mounting plate - vertical pole
mounting...........................................................................................................34
Figure 14 Example of stripped AC (mains) power cable........................................38
Figure 15 M20×1.5 cable gland with split bushing................................................... 43
Figure 16 Connecting probes to Indigo500...............................................................45
Figure 17 Measurements view on touchscreen......................................................... 47
Figure 18 Graph view on touchscreen.........................................................................48
Figure 19 Configuration menu on touchscreen.........................................................49
Figure 20 Graph data statistics view on touchscreen............................................. 50
Figure 21 Web interface and main views.....................................................................51
Figure 22 Network settings on touchscreen.............................................................. 55
Figure 23 Date and time settings on touchscreen....................................................56
Figure 24 Units settings on touchscreen.....................................................................58
Figure 25 Screen lock configuration menu on touchscreen.................................. 59
Figure 26 Web interface, Measurements view............................................................61
Figure 27 User creation page.........................................................................................64
Figure 28 Network settings in web interface............................................................. 67
Figure 29 Date and time settings in web interface.................................................. 69
Figure 30 Screen lock view in web interface..............................................................72
Figure 31 Configurable Home views on touchscreen.............................................. 74
Figure 32 Analog outputs configuration menu on touchscreen,
General tab active...........................................................................................76
Figure 33 Analog input configuration menu on touchscreen................................79
Figure 34 Relays configuration menu on touchscreen, Relay 2 tab active........80
Figure 35 Behavior of relay that activates above limit, with hysteresis..............82
Figure 36 Analog outputs configuration menu in web interface..........................85
Figure 37 Analog outputs test mode in web interface............................................87
Indigo510, Indigo520 User Guide M212287EN-N
6

Figure 38 Analog input configuration menu in web interface.............................. 88
Figure 39 Relays configuration menu in web interface...........................................89
Figure 40 Relays test mode in web interface..............................................................91
Figure 41 Materials for recycling...................................................................................112
List of figures
7

List of tables
Table 1 Document versions (English)...........................................................................9
Table 2 Related manuals.................................................................................................10
Table 3 LED indicator states.......................................................................................... 18
Table 4 Logs and their types and lengths................................................................. 22
Table 5 PELV power supply input terminals.............................................................36
Table 6 AC power supply input terminals..................................................................37
Table 7 Output terminals for relay 1 and relay 2......................................................39
Table 8 Analog output terminals.................................................................................40
Table 9 Analog input terminals.....................................................................................41
Table 10 Connection terminals for probe 1 and probe 2......................................... 44
Table 11 Relay wiring: Normally open (NO)............................................................... 82
Table 12 Relay wiring: Normally closed (NC).............................................................82
Table 13 Unit IDs of transmitter and probes.............................................................. 94
Table 14 Indigo510 transmitter options..................................................................... 103
Table 15 Indigo510 operating environment.............................................................. 103
Table 16 Indigo510 inputs and outputs...................................................................... 103
Table 17 Indigo510 compliance....................................................................................104
Table 18 Indigo500 Series mechanical specifications........................................... 105
Table 19 Indigo500 Series user interfaces................................................................ 105
Table 20 Indigo520 transmitter options.....................................................................105
Table 21 Indigo520 measurement performance.....................................................106
Table 22 Indigo520 operating environment............................................................. 106
Table 23 Indigo520 inputs and outputs..................................................................... 107
Table 24 Indigo520 compliance................................................................................... 109
Table 25 Indigo500 Series mechanical specifications........................................... 109
Table 26 Indigo500 Series user interfaces................................................................109
Table 27 Indigo-compatible probes............................................................................. 110
Table 28 Other compatible devices..............................................................................110
Table 29 Indigo500 Series accessories....................................................................... 110
Table 30 Indigo500 Series spare parts......................................................................... 111
Table 31 Materials for recycling..................................................................................... 112
Table 32 Unit IDs of transmitter and probes.............................................................. 113
Table 33 Modbus function codes...................................................................................113
Table 34 Device identification objects.........................................................................114
Table 35 Floating point measurement data registers (read-only).......................114
Table 36 Integer measurement data registers (read-only)....................................115
Table 37 Status registers (read-only)...........................................................................115
Table 38 Error flags (read-only).................................................................................... 116
Indigo510, Indigo520 User Guide M212287EN-N
8

1. About this document
1.1 Version information
This document provides detailed instructions for installing, using, and maintaining Vaisala
Indigo510 and Indigo520 transmitters.
Table 1 Document versions (English)
Document
code
Date Description
M212287EN-N November 2022 Added sections:
•Analog input (page 20)
•Analog input terminals and lead-through (page 40)
•Analog input wiring when powering with Indigo520
(page 41)
•Analog input wiring with external power supply (page 42)
•Configuring analog input on touchscreen (page 79)
•Configuring analog input in web interface (page 88)
•Testing relays in web interface (page 91)
•Status registers (page 115)
Updated sections:
• Updated images.
•Indigo500 basic features and options (page 12)
•Safety (page 24)
•Touchscreen display (page 17)
•Preparing AC (mains) power cable (page 38)
•Touchscreen display and main views (page 47)
•Web interface and main views (page 51)
•Troubleshooting (page 100)
•Indigo510 specifications (page 103)
•Indigo520 specifications (page 105)
•Unit IDs (page 113)
•Measurement data registers (page 114)
M212287EN-M August 2022 Updated sections:
• Updated images throughout the document.
•Data logging (page 22)
•Probe connection terminals and lead-throughs (page 43)
•Temperature compensation (page 46)
•Touchscreen display and main views (page 47)
•Configuring analog outputs on touchscreen (page 75)
•Testing analog outputs on touchscreen (page 78)
•Exporting logged data (page 93)
•Indigo510 specifications (page 103)
•Indigo520 specifications (page 105)
Chapter 1 – About this document
9

Document
code
Date Description
M212287EN-L March 2022 Added sections:
•Configuring screen lock on touchscreen (page 58)
•Resetting PIN code in web interface (page 71)
Updated sections:
•Indigo500 basic features and options (page 12)
•Starting up transmitter using touchscreen display (page 53)
•Accessing configuration menu (page 73)
1.2 Related manuals
For the latest versions of these documents, see docs.vaisala.com.
Table 2 Related manuals
Document code Name
M212290EN Vaisala Indigo500 Series Transmitters Quick Guide
1.3 Documentation conventions
Warning alerts you to a serious hazard. If you do not read and
follow instructions carefully at this point, there is a risk of injury or even death.
WARNING!
Caution warns you of a potential hazard. If you do not read and
follow instructions carefully at this point, the product could be damaged or
important data could be lost.
CAUTION!
Note highlights important information on using the product.
Tip gives information for using the product more eciently.
Indigo510, Indigo520 User Guide M212287EN-N
10