Vaporfi ATOM Operating and maintenance instructions

QUICK START GUIDE
ENGLISH

WHAT’S INCLUDED
» [ 1 ] Dry Herb Vaporizer
» [ 1 ] Atom Straight Mouthpiece (Pre-Installed)
» [ 1 ] Replacement Screen
» [ 2 ] Cleaning Pipes
» [ 1 ] Packing Tool
» [ 1 ] Micro USB Cable
» [ 1 ] User Guide

QUICK START
Click the power button once to turn the device on or off. After
clicking the power button, the LED light will turn white, indicating
that the device is on. Once the device has turned on, the light will
change from white to purple. This indicates that the device is in
heating mode. Once the device has finished heating up, the light
will then turn green, indicating is it ready for use.
NOTE: Press the power button once to shut down the device while
it is in heating mode. If you want to shut down the device during
the process of changing temperatures, hold the power button two
seconds or shake the device to return to heating mode, then press
the power button once to shut down.

USING DEVICE
There are three temperature settings featured in the Atom device.
The first temperature of 360F, is represented by a blue light, the
second temperature of 410F, is represented by a yellow light, and
lastly, the third temperature of 464F, is represented by a red light. If
the lowest temperature is not of your liking, you can easily change
temperatures by holding the power button for two seconds. Once
you have released the power button, you can now navigate through
the temperatures by clicking the power button until you have
reached your preferred temperature. When you have chosen your
temperature, hold the power button for two seconds. By doing so,
the device will recognize this as your selected temperature and will
go back into heating mode. Once the LED light turns green, inhale
directly from the mouth piece.

BATTERY LIFE
Not only are the LED lights responsible for indicating the
temperature of the device, they also represent the battery levels of
the device. While the device is in heating mode, users can shake the
device in order to show the battery level. A green light means the
device has a full battery, yellow indicates a partial battery, while red
means the battery levels are low and the device should be charged.
While charging, the device will show a blue LED light.
NOTE: The Atom offers a unique feature in which users can shake
the device once they have chosen their preferred temperature and
would like to return to heating mode.

NOTE: To preserve battery life, the device will enter standby mode
after 30 seconds without use. While in standby mode, the device
lowers the temperature, but still remains in heating mode and is
ready for use. This mode is represented by a white LED light. The
device will automatically turn off after two minutes without use.
USB PORT POWER BUTTON
MOUTH PIECE
LED LIGHT

WARNING
Do not attempt to modify equipment; doing so can result in
permanent damage, overheating and/or explosion which may lead
to severe injuries or death.
For more information visit: vaporfi.com/how-it-works

DISCLAIMER
Vaporfi products are not smoking cessation products and have
not been tested as such. The U.S. FDA has not approved these
products for any use and they are not intended to diagnose, cure,
mitigate, treat or prevent any disorder, disease, or physical or
mental condition. Some Vaporfi products contain a chemical known
to the State of California to cause cancer or birth defects or other
reproductive harm. Nicotine is addictive and habit forming, and it is
very toxic by inhalation, in contact with the skin, or if swallowed.