Verathon GlideScope Manual

Operations & Maintenance Manual

0900‑5017 REV‑02

GLIDESCOPE
CORE
Operations & Maintenance Manual
Effective: January 20, 2019
Caution: Federal (United States) law restricts this
device to sale by or on the order of a physician.

CONTACT INFORMATION
To obtain additional information regarding your GlideScope system,
please contact Verathon Customer Care or visit verathon.com/global‑support.
Verathon Inc.
20001 North Creek Parkway
Bothell, WA 98011 U.S.A.
Tel: [phone] (US and Canada only)
Tel: [phone]
Fax: [phone]
verathon.com
Verathon Medical (Europe) B.V.
Willem Fenengastraat 13
1096 BL Amsterdam
The Netherlands
Tel: [phone]
Fax : [phone]
Verathon Medical (Canada) ULC
2227 Douglas Road
Burnaby, BC V5C 5A9
Canada
Tel: [phone]
Fax: [phone]
Verathon Medical (Australia) Pty Limited
Unit 9, 39 Herbert Street
St Leonards NSW 2065
Australia
Within Australia: 1800 613 603 Tel / 1800 657 970 Fax
International: [phone] Tel / [phone] Fax
Copyright © 2020 by Verathon Inc. All rights reserved. No part of this manual may be copied or transmitted by any method without the
express written consent of Verathon Inc.
GlideScope, the GlideScope symbol, GlideScope BFlex, GlideScope Core, GVL, GlideRite, QuickConnect, Reveal, MagnaView, Spectrum,
Verathon, and the VerathonTorch symbol are trademarks or registered trademarks of Verathon Inc. All other brand and product names
are trademarks or registered trademarks of their respective owners.
Not all Verathon Inc. products shown or described in this manual are available for commercial sale in all countries.
Information in this manual may change at any time without notice. For the most up‑to‑date information, see the documentation
available at verathon.com/product‑documentation.

i
Operations & Maintenance Manual: Table of Contents
0900‑5017 REV‑02
TABLE OF CONTENTS
IMPORTANT INFORMATION.................................................................................................................................1
Product Information............................................................................................................................................1
Product Description ............................................................................................................................................1
Statement of Intended Use..................................................................................................................................1
Essential Performance .........................................................................................................................................1
Environments of Intended Use.............................................................................................................................1
Statement of Prescription ....................................................................................................................................1
HIPAA Privacy .....................................................................................................................................................1
Notice to All Users ..............................................................................................................................................2
Warnings & Cautions ..........................................................................................................................................2
INTRODUCTION ....................................................................................................................................................6
GlideScope Core .................................................................................................................................................6
System Parts & Accessories .................................................................................................................................7
Buttons, Icons, & Connections ............................................................................................................................8
SYSTEM FEATURES..............................................................................................................................................14
Home Screen ....................................................................................................................................................14
Gallery.............................................................................................................................................................. 15
SETTING UP .........................................................................................................................................................16
Procedure 1. Perform Initial Inspection ..................................................................................................... 16
Procedure 2. Mount the System (Optional) ............................................................................................... 17
Procedure 3. Charge the Monitor Battery .................................................................................................20
Procedure 4. Complete the Setup Wizard (Optional) ................................................................................. 21
Procedure 5. Configure User Settings (Optional) .......................................................................................24
Procedure 6. Attach the Video Cable and Scope.......................................................................................27
Procedure 7. Attach the USB Device (Optional) .........................................................................................30
Procedure 8. Connect to an External Monitor (Optional) ........................................................................... 31
Procedure 9. Perform a Functional Check .................................................................................................32

ii
0900‑5017 REV‑02
USING THE DEVICE .............................................................................................................................................33
Procedure 1. Prepare the System..............................................................................................................33
Procedure 2. Use a USB Pulse Oximeter ....................................................................................................34
Procedure 3. Adjust Video Layout.............................................................................................................35
Procedure 4. Rotate the Display................................................................................................................36
Procedure 5. Record Video or Take a Snapshot .........................................................................................36
Procedure 6. Use the Gallery ....................................................................................................................37
CLEANING & DISINFECTING ...............................................................................................................................42
Procedure 1. Clean the Video Monitor......................................................................................................43
Procedure 2. Clean the Workstation and Power Adapter ..........................................................................43
MAINTENANCE & SAFETY..................................................................................................................................44
Periodic Inspections ..........................................................................................................................................44
GlideScope Core Battery ...................................................................................................................................44
System Software...............................................................................................................................................44
Device Repair....................................................................................................................................................45
Device Disposal.................................................................................................................................................45
LIMITED WARRANTY..........................................................................................................................................46
PRODUCT SPECIFICATIONS.................................................................................................................................48
System Specifications, Standards, & Approvals...................................................................................................48
Component Specifications ................................................................................................................................48
Battery Specifications........................................................................................................................................50
Electromagnetic Compatibility...........................................................................................................................50
GLOSSARY ...........................................................................................................................................................55

1
Operations & Maintenance Manual: Important Information
0900‑5017 REV‑02
IMPORTANT INFORMATION
PRODUCT INFORMATION
GlideScope Core monitors provide the ability to attach a wide range of accessories, allowing for innovative
system configurations. With two input connections, the system allows users to switch between different
scopes without needing to disconnect and reconnect, or to have two different instruments connected for use
simultaneously with picture‑in‑picture (Core 10) or Dual View (Core 15) options.
PRODUCT DESCRIPTION
GlideScope Core is an all‑in‑one system offering immediate access to the tools you need to visualize the
airway. Designed around a 10” or 15” high‑definition, touchscreen monitor and comprehensive workstation,
GlideScope Core delivers elevated visibility and improved workflow.
For more information on compatible scopes, please see the GlideScope Video Laryngoscopes
Operations & Maintenance Manual (part number 0900‑4940) and the GlideScope BFlex Single‑Use
Bronchoscopes Operations & Maintenance Manual (part number 0900‑4939), which are available at
verathon.com/product‑documentation.
STATEMENT OF INTENDED USE
The monitors and workstations are intended to work with video endoscopes, in conjunction with other
ancillary equipment, for endoscopic procedures.
ESSENTIAL PERFORMANCE
When connected to compatible camera units (such as video laryngoscopes and bronchoscopes), the essential
performance of the monitor is to support the display of a clear, unobstructed view of the airway and
tracheobronchial tree for medical procedures.
ENVIRONMENTS OF INTENDED USE
The GlideScope Core system is intended to be used in a Professional Healthcare Environment.
STATEMENT OF PRESCRIPTION
Caution: Federal (United States) law restricts this device to sale by or on the order of a physician.
The system should be used only by individuals who have been trained and authorized by a physician or used
by healthcare providers who have been trained and authorized by the institution providing patientcare.
HIPAA PRIVACY
The Health Insurance Portability and Accountability Act of 1996 (“HIPAA”) regulations require our customers to
monitor and limit the ways in which patients’ confidential information is accessed, utilized, stored, transmitted,
and disposed. Our customers are ultimately responsible for ensuring all electronic health information contained
within the system is protected. In the course of providing the services to customers, Verathon will remove all
electronic protected health information from the system if present.

2
0900‑5017 REV‑02
NOTICE TO ALL USERS
Verathon recommends that all users read this manual before using the system. Failure to do so may result in
injury to the patient, may compromise the performance of the system, and may void the system warranty.
Verathon recommends that new users:
• Obtain instruction from a qualified individual
• Practice using video laryngoscopes on a mannequin before clinical use
• Acquire clinical training experience on patients without airway abnormalities
WARNINGS & CAUTIONS
Warnings indicate that injury, death, or other serious adverse reactions may result from use or misuse of
the device. Cautions indicate that use or misuse of the device may cause a problem, such as a malfunction,
failure, or damage to the product. Throughout the manual, pay attention to sections labeled Important, as
these contain reminders or summaries of the following cautions as they apply to a specific component or
usesituation. Please heed the following warnings and cautions.
WARNINGS: USE
Before every use, ensure that the instrument is operating correctly and has no sign of damage.
Do not use this product if the device appears damaged. Refer servicing to qualified personnel.
Always ensure that alternative airway management methods and equipment are readily
available.
Report any suspected defects to Verathon Customer Care. For contact information, visit
verathon.com/global‑support.
WARNING
Portable radio frequency communications equipment (including peripherals such as antenna
cables and external antennas) may not be used within 30 cm (12 inches) of any part of the
GlideScope Core system, including cables that Verathon specifies or provides for use with the
system. If this distance is not maintained, performance of the system may be degraded and
image display may be compromised.
WARNING
Verathon has conducted no analysis to establish the compatibility of the system with
environments where magnetic resonance imaging (MRI) equipment is installed. Because of this,
the owner of the system must exclude it from any magnetic resonance (MR) environment.
WARNING
Use only a passive‑type USB flash drive. Do not use USB drives powered by another externalsource.
WARNING

3
Operations & Maintenance Manual: Important Information
0900‑5017 REV‑02
WARNINGS: CLEANING
Because the product may be contaminated with human blood or body fluids capable of
transmitting pathogens, all cleaning facilities must be in compliance with (U.S.) OSHA Standard
29CFR1910.1030 “Bloodborne Pathogens” or an equivalent standard.
WARNING
This product may only be cleaned by using the approved processes provided in this manual.
Cleaning methods listed are recommended by Verathon based on efficacy or compatibility with
component materials.
WARNING
For information on the handling and disposing of recommended reprocessing solutions, please
refer to the solution manufacturer’s instructions.
WARNING
Availability of cleaning products varies by country, and Verathon is unable to test products
in every market. For more information, please contact Verathon Customer Care. For contact
information, visit verathon.com/global‑support.
WARNING
This instrument and related devices may contain batteries and other environmentally hazardous
materials. When the instrument or accessories have reached the end of their useful service life,
see the section Device Disposal. Dispose of used, single‑use components as infectious waste.
WARNING
To reduce the risk of electrical shock, before cleaning the monitor or workstation, ensure that
the monitor is powered off and the power supply has been disconnected from both the monitor
and AC power.
WARNING
WARNINGS: PRODUCT SAFETY
To reduce the risk of electrical shock, use only the accessories and peripherals recommended by
Verathon.
WARNING

4
0900‑5017 REV‑02
To maintain the electrical safety of the system, the external monitors must be certified to IEC
60601‑1, IEC 60950‑1 or equivalent standards.
WARNING
To maintain electrical safety, use only the provided power supply. Connect the power cord and
power adapter to a properly grounded plug, and ensure that the disconnect is easily accessible.
Use only the accessories and peripherals recommended by Verathon.
WARNING
Electric shock hazard. Do not attempt to open the system components. This may cause serious
injury to the operator or damage to the instrument and voids the warranty. Contact Verathon
Customer Care for all servicing needs.
WARNING
Stored mechanical energy hazard. The premium workstation arm mechanism is under tension.
When the monitor is removed, it can move up rapidly on its own. Ensure that the arm is at its
highest position before removing the monitor.
WARNING
Use of accessories and cables other than those specified or provided by Verathon may cause this
system to experience electromagnetic malfunctions, including increased emissions or decreased
immunity. This may cause improper operation, procedure delays, or both.
WARNING
When equipped with a GlideScope Core 15” monitor, the GlideScope Core Premium
Workstation can tip over in some extended positions, possibly causing injury. To prevent this,
before rolling the system, move the monitor to its lowest and most retracted position.
WARNING
No modification of this equipment is allowed.
WARNING
Do not use the power adapter in the presence of flammable anesthetics.
WARNING

5
Operations & Maintenance Manual: Important Information
0900‑5017 REV‑02
CAUTIONS
Medical electrical equipment requires special precautions regarding electromagnetic
compatibility (EMC) and must be installed and operated according to the instructions in this
manual. For more information, see the Electromagnetic Compatibility section.
Avoid using the GlideScope system adjacent to or stacked with other equipment. If adjacent or
stacked use is necessary, observe the system to verify normal operation in the configuration in
which it will be used.
This device can radiate radio frequency energy and is highly unlikely to cause harmful
interference with other devices in the vicinity. There is no guarantee that interference will
not occur in a particular installation. Evidence of interference may include degradation of
performance in this device or other devices when operated simultaneously. If this occurs, try to
correct the interference by using the following measures:
•Turn devices on and off in the vicinity to determine the source of interference
•Reorient or relocate this device or other devices
•Increase the separation between devices
•Connect the device to an outlet on a circuit different than the other device(s)
•Eliminate or reduce EMI with technical solutions (such as shielding)
•Purchase medical devices that comply with IEC60601‑1‑2 EMC standards
Be aware that portable and mobile radio frequency communications equipment (cellular phones,
etc.) may affect medical electrical equipment; take appropriate precautions during operation.
CAUTION
The system contains electronics that may be damaged by ultrasonic and automated washing
equipment. Do not use an ultrasonic device or automated washing equipment, other than
Verathon‑approved systems, to clean this product.
CAUTION
Ensure that you do not use any abrasive brushes, pads, or tools when cleaning the video
monitor screen. The screen can be scratched, permanently damaging the device.
CAUTION

6
0900‑5017 REV‑02
INTRODUCTION
GLIDESCOPE CORE
The monitor is compatible with the following single‑use and reusable endoscopic devices, which this manual
refers to as scopes:
• Spectrum Single‑Use blades
• Titanium Reusable blades
• Video Baton and Stats
• BFlex Single‑Use Bronchoscopes
The monitor uses scopes and connecting cables, along with optional system components to help facilitate
intubations, endoscopy, or provide convenience to the user.
You may use either single‑use or reusable components, or your facility may elect to provide both. This
manual details how to use the monitor and provides limited information on how to connect scopes. For more
information on compatible scopes, refer to the following manuals or contact Verathon Customer Care:
• GlideScope Video Laryngoscopes Operations & Maintenance Manual (part number 0900‑4940)
• GlideScope BFlex Single‑Use Bronchoscopes Operations & Maintenance Manual (part number 0900‑4939)
Current editions of these manuals are available at verathon.com/product‑documentation.
In this document, unless otherwise noted, the term video cable describes all possible cable configurations for
reusable blades, single‑use blades, and video baton. The term scope describes all possible laryngoscope and
bronchoscope configurations.
SINGLE‑USE OPTIONS
Single‑use Spectrum blades and the video baton 2.0 connect to the monitor through a reusable GlideScope
Core Smart Cable.
Single‑use video laryngoscopes are identified by an Sin the blade name (for example, LoPro S4). Video
batons use single‑use GVL Stats which are offered in a comprehensive range of sizes, allowing clinicians to
meet the particular requirements of patients ranging in size from preterm infants to large adults.
All GlideScope BFlex single‑use bronchoscopes are single‑use components.
All single‑use components must be disposed of after one use.
Single‑use blades in S3 and S4 sizes may also be available in white. These are not part of the Spectrum
Single‑Use system. For more information about the white blades, see the GlideScope Titanium Single‑Use
Operations & Maintenance Manual (part number 0900‑4712) at verathon.com/product‑documentation.
IMPORTANT
REUSABLE OPTIONS
Titanium video laryngoscopes must be cleaned and high‑level disinfected between uses. These connect to
the video monitor through the reusable GlideScope Core Video Cable. Due to their titanium construction,
reusable video laryngoscopes contain a Tin the blade name, such as LoPro T4.

7
Operations & Maintenance Manual: Introduction
0900‑5017 REV‑02
SYSTEM PARTS & ACCESSORIES
Table 1. Required System Components
REQUIRED PARTS & ACCESSORIES
GlideScope Core video monitor
GlideScope Core 10 GlideScope Core 15
12V DC poweradapter Power cable Video cable*†‡
One or more of the following scope styles:
Spectrum Single‑Use Blades† Video Batons and Single‑Use Stats†Titanium Reusable Blades†
BFlex Single‑Use Bronchoscopes‡

* Cables shortened for illustrationpurposes.
† For a full list of compatible cables and video scopes, please see the GlideScope Video Laryngoscopes Operations & Maintenance Manual
(part number 0900‑4940).
‡ For a full list of single‑use bronchoscopes and compatible cables, please see the GlideScope BFlex Single‑Use Bronchoscopes Operations &
Maintenance Manual (part number 0900‑4939).

8
0900‑5017 REV‑02
Table 2. Optional System Components*
OPTIONAL PARTS & ACCESSORIES
Basic workstation Premium workstation (0800‑0557) Premium workstation (0800‑0636)
Nonin 3231 USB
External Pulse
Oximeter*GlideRite Stylets†Media storage USB
Operations &
Maintenance Manual USB
BUTTONS, ICONS, & CONNECTIONS
The digital, full‑color GlideScope Core Video Monitor clearly displays the images transmitted from the camera
in the scope. The front of the monitor includes the button for power and the touchscreen.
The back panel of the monitor includes sockets and ports for connecting the power cord, video cables,
USB flash drives, and an HDMI cable for an external video display. When the USB and HDMI ports are
not in use, it is recommended that the rubber cover be used to protect the openings from dust and other
contamination. The back of the monitor also features VESA mounting holes that allow you to attach the
monitor to a GlideScope Core workstation.
The following tables provide general information regarding the buttons and icons on the monitor.
* Not available in all markets.
† For a full list of compatible stylets, please see the GlideRite DLT Stylet Operations & Maintenance Manual (part number 0900‑4841) and
the GlideRite Rigid Stylet Operations & Maintenance Manual (part number 0900‑4686).

9
Operations & Maintenance Manual: Introduction
0900‑5017 REV‑02
Table 3. Monitor Buttons
BUTTON GROUP BUTTON FUNCTION
Front panel
Power: This is a physical button located on the bottom left corner of the
display. Press and release to turn on the monitor. Press and hold to turn it off.
Note: If the monitor locks up or becomes unresponsive for any reason,
press and hold the Power button for 7seconds to turn off the system.
Home screen (left
side)—media
buttons and main
menu
Record (toggle): Records all visible video feeds.
While recording, and depending on the recording status and mode, the
record button’s icon will change to one of the following:
Video is recording. Press to end recording.
Video is recording with audio. Press to end recording.
Video recording error.
Video with audio recording error.
Snapshot button: Takes a photo of the video feed(s).
If there is an error, the icon changes to include an Attention symbol:
Note editor button: Launches Note Editor.
If there is an error, the icon changes to include an Attention symbol:
Main Menu: Reveals the Main Menu flyout containing the Gallery and
Settings buttons, and when enabled the Video Rotation.
Status bar
Favorites filter: Toggles the favorites filter. When the filter is turned on,
the star and toggle will change from gray to gold.
Sort by date (Gallery): Select the up arrow for ascending order or
down arrow for descending order.
Main Menu Flyout
Gallery: Launches Gallery page.
If there is an error, the icon changes to include an Attention symbol:
Settings: Launches Settings page.
180
Video Rotation: Pressing this button rotates video feed(s) 180‑degrees.
Can be enabled or disabled in the Feature Settings Tab.
Settings menu
Features: Displays the Feature Settings page
Regional Settings: Displays the Regional Settings page
Administrative Settings: Displays the Admin Settings page

10
0900‑5017 REV‑02
BUTTON GROUP BUTTON FUNCTION
Toggle switches
Switch in the off position.
Switch in the on position.
Note: If the toggle switch enables the Video Rotation option, it turns gold.
Home screen (right
side)—Video layout
menus
Video Layout Menu: Opens the Video Layout menu. The menu contains
several selectable layout configurations. The button changes to match the
following layouts.
Core 10 Core 15
ABBA
Video Feed button and Icon: Displays the video feed channel (A or B)
and connected scope. The following are a few examples:
Move Left: Moves the video window to the left side.
Move Right: Moves the video window to the right side.
Close: Closes the video window, dialog, or editor.
Note editor
Save: Saves editor changes.
Close: Closes editor.
Gallery
Export: Exports selected file.
Star: Adds or removes ‘favorite’ status to selected file.
Delete: Deletes selected file.
Back: Returns to previous screen.
Select All: When viewing files in the Gallery, check this box to select all
files in the row.
Note Thumbnail: Indicates the file is a patient note. Tap to open the
patient note viewer.
Video Thumbnail: Indicates the file is a video. Select to open the video
player.
Expand: Expands the video to fill the screen.
Standard View: Returns the video to its normal size.

11
Operations & Maintenance Manual: Introduction
0900‑5017 REV‑02
BUTTON GROUP BUTTON FUNCTION
Media Export
Copy: After tapping the Export button, select this option to copy the
selected files to the USB drive. This leaves a copy in the internal memory.
Move: After pressing the Export button, select this option to move the
selected files to the USB drive. This removes the copy from the internal
memory unless the file is marked as favorite.
Gallery—video player
Restart: Rewinds selected video to beginning.
Rewind: Rewinds selected video by 20% of the video’s duration.
Play Video: Plays selected video. Changes to pause button while video is
playing.
Pause Video: Pauses the playing video. Changes to play button while
video is paused.
Fast Forward: Skips selected video by 20% of the video’s duration.
Volume (toggle): Toggles volume buttons and meter.
Volume Up: Turns the volume up.
Volume Down: Turns the volume down.
Mute: Mutes the volume. When muted, also un‑mutes the volume.
Playhead: Shows the current location in the video. Can be dragged
horizontally to jump to a specific location in the video.
Table 4. On‑Screen Icons
ICON FUNCTION
Battery Status: Indicates the remaining battery power and, when available, the
estimated time remaining. See Charge the Monitor Battery on page20 for more
information.
Favorite: Displays above Gallery files that have been selected as favorites.
Power‑Down Countdown: The unit is about to turn off. If this is due to the Auto
Shutdown feature, touch the screen to cancel the shutdown.
Note: The Auto Shutdown feature can be adjusted or disabled on the Feature Settings
screen. For more information, see Complete the Setup Wizard (Optional) on page21.
Internal Memory: Displays available internal memory.
USB Drive: Displays available USB memory. Shows when a USB drive is attached.

12
0900‑5017 REV‑02
ICON FUNCTION
Attention: Indicates important text.
USB Flash Drive: Indicates a USB flash drive is detected.
Hourglass: Advises the operator to wait while the system shuts down.
Patient name field: Indicates the patient name text entry field.
Clinician name field: Indicates the clinician name text entry field.
Device Name: Indicates the device name text entry field.
Recording options: Indicates settings for video and audio recording.
180
Video Rotate options: Indicates settings for video rotation.
System Sounds: Indicates settings for system sounds.
Time zone and daylight savings: Indicates settings for the time zone and
daylight savings time.
Security Code options: Indicates settings for system security code.
Video Timestamps: Indicates settings for video timestamps.
Snapshot Timestamps: Indicates settings for snapshot timestamps
Date options: Indicates settings for the system date.
Time Editor: Icon for the time editor.
Charging indicator: Appears when the monitor is connected to the power
adapter.
Auto‑Shutdown: Indicates settings for Auto‑Shutdown.
Pulse rate: Appears when an external pulse oximeter is connected to the monitor
and receiving readings from the patient.
Note Field options: Indicates settings for note fields.
Reset Settings: Indicates option to reset system settings to factory default.

13
Operations & Maintenance Manual: Introduction
0900‑5017 REV‑02
Figure 1. GlideScope Core Monitor Front Panel
Battery indicator LED:
Displays power and battery
charge state
LCD touch screen:
Displays images from
video accessories and
recorded videos and
images
Power button:
Powers the monitor
on or off
Figure 2. GlideScope Core Monitor Back Panel
Cable Organizer mounting holes
(Core 15 only)
Video‑out port:
Connect an HDMI
cable from the
external monitor
Video cable ports:
Attach video cables or
Smart Cables
Product identification:
Includes product serial
number
USB ports:
Connect USB flash drives
to transfer recorded
videos or snapshots,
and connect an optional
pulse oximeter sensor
Connector panel cover:
Protects USB, HDMI
ports, and power socket
from debris
Power socket:
Connect the barrel
plug from the 12V
power adapter
Mounting plate area:
Connect the monitor to
workstation

14
0900‑5017 REV‑02
SYSTEM FEATURES
HOME SCREEN
The Home screen*displays system information and provides access to several options and menus.
Device name USB device connected
Battery level indicator
Alert messagesDate and time
Video layout menu†
Input B†
Input A†
Pulse Oximeter
readings
Patient notes
Snapshot
Record video
Main menu
Video Feed B† Video Feed A
2018-10-14 95 min
AB
A
B
98
% SpO2
78
CITY HOSPITAL
10:55
A
B
Core 10 Picture‑in‑Picture layout
STATUS BAR
The Status Bar runs along the top of the display. It is shown at all times and can provide the following
information depending on the current screen:
• Date and Time
• Alert messages
• Device name
• System or task status
• USB connection status
• Battery status and approximate time remaining
• Organization controls (Gallery)
• Favorites filter (Gallery)
LEFT BAR
The left bar provides access to the Main Menu, Patient Notes, and Snapshot buttons, and also the Record
Video button when it is enabled in the settings menu.
The monitor can also relay SpO2and pulse‑rate readings when a Nonin 3231 USB External Pulse Oximeter is
attached. The readings are displayed near the top of the bar.
Note: If a pulse oximeter is attached to the monitor and is not receiving information from a patient, two
dashes (‑‑) are shown instead of a reading.
* GlideScope Core 15 Dual View layout pictured.
† Only shown when two cameras are connected to monitor.