Vertiv VP7557 User manual

Instruction
Manual
Basic Rack PDU VP7557
VertivCo.com/geist

Basic Rack PDU VP7557 Instruction Manual Page 2
Contents
1. Specifications........................................................................................................................................................ 3
1.1. Overview ........................................................................................................................................................ 3
1.2. Environmental................................................................................................................................................ 3
1.2.1. Temperature........................................................................................................................................3
1.2.2. Humidity .............................................................................................................................................. 3
1.2.3. Elevation .............................................................................................................................................. 3
1.3. Electrical......................................................................................................................................................... 3
1.4. Receptacle Ratings ......................................................................................................................................... 3
2. Installation ............................................................................................................................................................. 5
2.1. Instructions .................................................................................................................................................... 5
2.2. Guidelines.......................................................................................................................................................5
3. Mounting................................................................................................................................................................ 6
4. Service/Tech Support........................................................................................................................................... 10
4.1. Service and Maintenance............................................................................................................................. 10
4.2. More Technical Support...............................................................................................................................10
5. Revision................................................................................................................................................................ 10

Basic Rack PDU VP7557 Instruction Manual Page 3
1. SPECIFICATIONS
1.1. OVERVIEW
The VP7557 is a Power Distribution Units (PDU) intended for connection to a 16 Amp AC Mains cir-
cuit. The PDUs are designed to be powered by a three phase WYE 230/400 Volt AC input circuit. 230
Volt AC (Line-Neutral) single phase output power is distributed through the output receptacles to
connected equipment.
1.2. ENVIRONMENTAL
1.2.1. TEMPERATURE
Operating: 10°C (50°F) min 45°C (113°F) max
Storage: -25°C (-13°F) min 65°C (149°F) max
1.2.2. HUMIDITY
Operating: 5% min 95% max (non-condensing)
Storage: 5% min 95% max (non-condensing)
1.2.3. ELEVATION
Operating: 0 m (0 ft) min 2000 m (6561 ft) max
Storage: 0 m (0 ft) min 15240 m (50000 ft) max
1.3. ELECTRICAL
See nameplate for unit ratings.
1.4. RECEPTACLE RATINGS
IEC-320 C13 125/250 Volt, 10 Amp (per Receptacle Bank)
IEC-320 C19 125/250 Volt, 16 Amp

Basic Rack PDU VP7557 Instruction Manual Page 4
** Receptacle ratings give nameplate component voltage and current ratings. All Y Series PDUs have
output receptacles wired for 230 Vac, Line-Neutral Output

Basic Rack PDU VP7557 Instruction Manual Page 5
2. INSTALLATION
2.1. INSTRUCTIONS
1. Using appropriate hardware, mount PDU to rack (see Mounting section for additional instruc-
tions)
2. Plug PDU into de-energized 20 or 30 Amp branch circuit receptacle.***
3. Connect devices into PDU’s output receptacles. It is recommended that the devices are turned
off until all devices are connected to PDU
4. Turn on branch circuit to energize PDU.
5. Power on devices. Sequential power up is recommended to avoid high inrush current.
***Branch Circuit should be sized based on the PDU’s nameplate electrical rating. A 16 Amp rated
PDU is intended for use on a 20 Amp Branch Circuit, while a 24 Amp rated PDU is intended for use on
a 30 Amp Branch Circuit. For Global Units a 16 Amp rated PDU is intended for use on a 16 Amp
Branch Circuit, while a 32 Amp rated PDU is intended for use on a 32 Amp Branch Circuit.
2.2. GUIDELINES
•If the PDU is installed in a cabinet the ambient temperature of the rack should be no greater
than 45 C.
•Install the PDU such that the amount of airflow required for safe operation of equipment is not
compromised.
•Mount the PDU so that a hazardous condition is not achieved due to uneven mechanical loading.
•Follow nameplate ratings when connecting equipment to the branch circuit. Take into consider-
ation the effect that overloading of the circuits might have on over-current protection and sup-
ply wiring.
•The PDU relies on the building installation for protection from over-current conditions. A certi-
fied overcurrent protection device is required in the building installation. The overcurrent pro-
tection device should be sized according to the PDU’s nameplate ratings and local/national elec-
trical codes.
•Reliable earthing of rack-mount equipment should be maintained. Particular attention should be
given to supply connections other than direct connections to the branch circuit. The PDU must
be connected to an earthed socket-outlet.
•The PDU is intended for Restricted Access Locations only and only qualified service personnel
should install and access the PDU.
•For pluggable equipment, install the PDU so that the input plug or appliance coupler may be dis-
connected for service.
•Sequential power-up of devices powered by the PDU is recommended to avoid high inrush cur-
rent.
•Caution: Disconnect all power cords before servicing.
•The PDU is intended for use with TN or TT power supply systems

Basic Rack PDU VP7557 Instruction Manual Page 6
3. MOUNTING
Full Length Bracket
Using the full length bracket, mount PDU to rack as shown
Mini "L" Brackets (SLB-4)
Using the mini “L” brackets, attach PDU to rack as shown

Basic Rack PDU VP7557 Instruction Manual Page 7
Vertical Extension Brackets (VCB-1)
Using the vertical extension brackets, attach PDU to rack as shown
Toolless Mounting Hardware (11621)
Secure toolless mounting buttons to PDU as shown. Use toolless buttons with key-holed slots built into
cabinet or with optional Vertiv key-holed brackets.

Basic Rack PDU VP7557 Instruction Manual Page 8
Toolless Full Length Bracket (TLFL)
Using full length toolless bracket and toolless mounting buttons, attach PDU to rack as shown
Single Side Mount 2 Unit Brackets (TSMX2)
Using single side mount 2 unit brackets and toolless mounting buttons, attach PDU to rack as shown

Basic Rack PDU VP7557 Instruction Manual Page 9
Offset/Side Mount Brackets (EZB-1)
Using the offset/side mount brackets, attach PDU to rack as shown.
7" Extension Brackets (XB-7)
Using the 7” extension brackets, attach PDU to rack as shown

Basic Rack PDU VP7557 Instruction Manual Page 10
4. SERVICE/TECH SUPPORT
4.1. SERVICE AND MAINTENANCE
No service or maintenance is required. Do not attempt to open the PDU or you may void the war-
ranty. No serviceable parts inside. It is recommended that power be removed from the unit before
installing or removing any equipment.
4.2. MORE TECHNICAL SUPPORT
VertivCo.com/geist
Phone Support: 1.800.432.3219
Email: [e-mail] or contact your distributor
Technical Support Form: VertivCo.com/Tech-Support
5. TECHNICAL SUPPORT FORM: VERTIVCO.COM/TECH-SUPPORT REVISION
Revision
Date
Notes
Approved By
1.0
4/8/2009
Original Published Version
BP
1.1
7/1/2009
Added Link Speed Information
BP
1.2
6/30/2010
Updated Current Monitoring Meter
Name
BP
1.3
1/24/11
Added Satellite Current Monitoring
SC & BP
1.4
6/22/2012
Changed Logo and Web Address
SR
2.0
7/29/2014
Changed Company Name
QN
3.0
5/30/2017
Remove Current Monitoring and
CM-3
GY

Basic Rack PDU VP7557 Instruction Manual Page 11
KEYWORD INDEX
No index entries found.

Basic Rack PDU VP7557 Instruction Manual Page 12
Thank You For
Purchasing Your Vertiv
Product
VertivCo.com/geist