Vidicode APRESA User manual

Call Recorder APRESA
&
Call Recorder APRESA Compact
Installation Manual
V 4.1
(VC1988)
vidicode
Vidicode
Blauw-roodlaan 140
2718 SK Zoetermeer
The Netherlands
Phone
[phone]
Fax
[phone]
Sales
[phone]
Support
[phone]
Email
[email protected]
Internet
www.vidicode.com

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®2
Care and Maintenance
Keep the APRESA dry. If it gets wet, wipe it
dry immediately with a soft, clean cloth.
Liquids might contain minerals that
corrode the electronic circuits.
Use and store the APRESA only in
temperature conditions between 0 and 40
degrees Celsius. Temperature extremes can
shorten the life of electronic devices and
distort or melt plastic parts.
Keep the APRESA away from excessive
dust and dirt.
Do not use aggressive chemicals, cleaning
solvents or strong detergents to clean the
APRESA.
LICENSES
=
€
Store your APRESA licenses in a safe place
as you may need these in the future.
THIS EQUIPMENT MUST BE EARTHED
FOR SAFETY REASONS

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®3
This manual was written to support and guide customers in the installation process of the hardware
and software of the:
APRESA SUPER MICRO 1U SERVER
APRESA STANDARD VIDICODE 1U SERVER
APRESA STANDARD VIDICODE 4U SERVER

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®4
APRESA SUPER MICRO 4U SERVER
APRESA COMPACT IP5 –IP10 –D8 –A8 –M10
APRESA SOFTWARE ONLY
APRESA COMPACT VoIP

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®5
How to use this manual.
You may need an introduction to a “VIDICODE made” APRESA server, while others want to install
the APRESA software-only on their alternative hardware.
Connecting the APRESA to the telecommunication infrastructure, the correct approach to signal
tapping, will be an issue that most users will have to deal with.
Also, the expansion of existing APRESA systems may need some guidance. Expanding an APRESA
system involves adding recording channels, increasing storage capacity or adding/ changing a RAID
volume.
The purpose of this manual is to support you in an effective way. The document starts by
presenting a road map that will guide you to the applicable sections for your situation. You will
easily find the chapters that are relevant for your situation by using the flow chart.
Besides this installation manual there are some supporting documents related to Apresa:
•VC2019 CALL RECORDER APRESA ADMIN MANUAL, for administrators and users;
•VC1758 APRESA QUICK GUIDE, a startup helper to gain access to documentation;
•VC1886 APRESA BASE SOFTWARE QUICK GUIDE, a startup helper for ‘software only’ users;
•VC1926 ADDITIONAL INFORMATION FOR THE APRESA REDUNDANT POWER SUPPLY;
•VC1927 CALL RECORDER APRESA SERVER HARDWARE REQUIREMENTS;
•VC2186 HOW TO UPDATE THE BASE SOFTWARE;
•VC2238 APRESA SUPPORT AND UPGRADES.
Refer to the VIDICODE price list for available APRESA articles, article codes and pricing.
THIS MANUAL IS FREQUENTLY UPDATED WITHOUT ANY NOTIFICATION
SO, YOU ARE STRONGLY ADVISED TO DOWNLOAD THE NEWEST RELEASE OF THIS MANUAL
FROM THE WEBSITE BELOW
THANK YOU
www.vidicode.com

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®6
C
CO ON NT TE EN NT TS S
1. DOCUMENT USE......................................................................................................................................10
1.1. SITUATIONS ..........................................................................................................................................10
1.1.1. The “made by VIDICODE” APRESA Server / APRESA Compact. ...............................................10
1.1.2. Apresa ‘Software only’...................................................................................................................10
1.1.3. Expanding an existing APRESA .....................................................................................................10
1.2. PACKAGE CONTENTS,MATERIALS AND TOOLING.................................................................................11
1.2.1. Package contents............................................................................................................................11
1.2.2. Advised Materials...........................................................................................................................11
1.2.3. Advised tooling...............................................................................................................................11
2. INTRODUCTION TO THE APRESA SERVER ....................................................................................12
2.1. APRESA STANDARD VIDICODE 4U SERVER ..........................................................................................14
2.1.1. Specifications .................................................................................................................................15
2.1.2. Enclosure........................................................................................................................................15
2.1.3. Motherboard / CPU / RAM / PSU..................................................................................................15
2.1.4. Hard drive (various configurations possible).................................................................................15
2.1.5. Supported PCIe interface card.......................................................................................................16
2.1.6. Environmental specification...........................................................................................................16
2.1.7. Approvals .......................................................................................................................................16
2.2. APRESA STANDARD VIDICODE 1U SERVER ..........................................................................................17
2.2.1. Specifications .................................................................................................................................17
2.2.2. Enclosure........................................................................................................................................17
2.2.3. Motherboard / CPU / RAM / PSU..................................................................................................17
2.2.4. Hard drive (various configurations possible).................................................................................18
2.2.5. Supported PCI interface card.........................................................................................................18
2.2.6. Supported PCIe interface card.......................................................................................................18
2.2.7. Environmental specification...........................................................................................................18
2.2.8. Approvals .......................................................................................................................................18
2.3. APRESA SUPER MICRO 1U SERVER ......................................................................................................19
2.3.1. Specifications .................................................................................................................................19
2.3.2. Enclosure........................................................................................................................................19
2.3.3. Motherboard / CPU / RAM / PSU..................................................................................................19
2.3.4. Hard drive (various configurations possible) ................................................................................20
2.3.5. Supported PCIe interface card.......................................................................................................20
2.3.6. Environmental specification...........................................................................................................20
2.3.7. Approvals .......................................................................................................................................20
2.4. APRESA SUPER MICRO 4U SERVER ......................................................................................................21
2.4.1. Specifications .................................................................................................................................21
2.4.2. Enclosure........................................................................................................................................21
2.4.3. Motherboard / CPU / RAM / PSU..................................................................................................22
2.4.4. Hard drive (various configurations possible) ................................................................................22
2.4.5. Supported PCIe interface card.......................................................................................................22
2.4.6. Environmental specification...........................................................................................................23
2.4.7. Approvals .......................................................................................................................................23
2.5. THE APRESA-COMPACT.....................................................................................................................24
2.5.1. Specifications .................................................................................................................................25
2.5.2. Enclosure........................................................................................................................................25
2.5.3. Motherboard / CPU / RAM / PSU..................................................................................................26
2.5.4. Hard drive ......................................................................................................................................26
2.5.5. Supported PCIe interface cards .....................................................................................................26
2.5.6. Environmental specification...........................................................................................................26
2.5.7. Approvals .......................................................................................................................................26
2.6. THE APRESA-COMPACT (VOIP-ONLY).............................................................................................27

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®7
2.6.1. Specifications .................................................................................................................................27
2.6.2. Enclosure........................................................................................................................................27
2.6.3. Motherboard / CPU / RAM / PSU..................................................................................................27
2.6.4. Hard drive ......................................................................................................................................27
2.6.5. Environmental specification...........................................................................................................28
2.6.6. Approvals .......................................................................................................................................28
2.7. HARDWARE REQUIREMENTS ................................................................................................................30
2.8. INTERFACE CARD INSTALLATION PROCEDURE......................................................................................30
2.9. APRESA BASE SOFTWARE INSTALLATION PROCEDURE BY USING A USB STICK. ..................................31
2.9.1. BIOS setup......................................................................................................................................31
2.9.2. Preparations...................................................................................................................................32
2.9.3. Prepare a bootable USB-Stick for Apresa Base Software Installation...........................................33
2.9.4. Apresa Base Software Installation using the USB-stick .................................................................35
2.9.5. Access the Apresa for the first time ................................................................................................37
2.9.6. BASE SOFTWARE Licensing .........................................................................................................41
2.9.7. Channel Licensing..........................................................................................................................46
2.9.8. SYNWAY driver installation ...........................................................................................................47
2.9.9. S&U licensing ................................................................................................................................48
2.9.10. Base Software Update ...............................................................................................................48
2.9.11. Install the IPMI driver...............................................................................................................48
2.9.12. Install addstorcli........................................................................................................................49
2.9.13. Help for installation of APRESA on Virtual Machines..............................................................49
2.9.14. Help for installation of Apresa on an existing Debian machine (Cloud)...................................49
2.9.15. General APRESA configuration ................................................................................................50
3. MOUNTING ...............................................................................................................................................51
3.1. LOCATION CONSIDERATIONS ...............................................................................................................51
3.2. MOUNTING APRESA INTO A 19-INCH CABINET...................................................................................52
3.3. APPLY POWER TO THE APRESA..........................................................................................................52
4. TELECOM WIRING .................................................................................................................................53
4.1. INTRODUCTION ....................................................................................................................................53
4.2. CONNECTOR LOCATIONS......................................................................................................................54
4.3. GENERAL REMARKS ABOUT WIRING ..................................................................................................55
4.4. WIRING AUDIO TAPS...........................................................................................................................55
4.4.1. Balanced signals ............................................................................................................................56
4.4.2. Un-balanced signals.......................................................................................................................56
4.4.3. Wiring using the RJ11 Patch Box...................................................................................................58
4.4.4. Direct wiring (NOT using a Patch Box).........................................................................................59
4.5. WIRING ANALOG TELEPHONY (POTS) TAPS...............................................................................60
4.6. WIRING TDM TELEPHONY TAPS........................................................................................................61
4.6.1. 2-Wire Vs. 4-Wire...........................................................................................................................61
4.6.2. Wiring schemes ..............................................................................................................................61
4.7. WIRING ISDN2 TELEPHONY TAPS (BASIC RATE ISDN).....................................................................64
4.8. WIRING ISDN E1/T1 TELEPHONY TAPS.............................................................................................65
4.9. CONFIGURATION OF VOIP TELEPHONY RECORDING ............................................................................67
4.9.1. Trunk Side Recording.....................................................................................................................67
4.9.2. Station Side Recording ...................................................................................................................68
4.9.3. VoIP topology 1..............................................................................................................................70
4.9.4. VoIP topology 2..............................................................................................................................71
4.9.5. VoIP topology 3..............................................................................................................................72
4.9.6. VoIP topology 4..............................................................................................................................73
4.9.7. VoIP topology 5..............................................................................................................................74
4.9.8. VoIP topology 6..............................................................................................................................75
4.9.9. VoIP topology 7..............................................................................................................................76
4.10. CONFIGURATION OF TETRA COMMUNICATION RECORDING................................................................76
4.11. PATCH PANELS.....................................................................................................................................77
4.11.1. RJ11 Patch panel.......................................................................................................................77
4.11.2. The Tapping Patch box..............................................................................................................78
5. EXPANDING APRESA .............................................................................................................................79

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®8
5.1. HOW TO ADD RECORDING CHANNELS...................................................................................................79
5.1.1. Channel license upgrade ................................................................................................................79
5.1.2. Installation of interface cards ........................................................................................................80
5.1.3. Installation of interface modules ....................................................................................................80
5.1.4. Increasing the storage capacity......................................................................................................82
5.1.5. Building or changing a software RAID volume..............................................................................82
6. BACKUP AND RESTORE BACKUP ......................................................................................................83
7. MAINTENANCE........................................................................................................................................85
7.1. HARDWARE..........................................................................................................................................85
7.2. SOFTWARE ...........................................................................................................................................85
8. REDUNDANT POWER SUPPLY ............................................................................................................86
9. STORAGE OPTIONS................................................................................................................................88
9.1. CONFIGURATION ..................................................................................................................................88
9.2. GENERAL INFORMATION ......................................................................................................................89
9.3. HOW TO REPLACE A FAILING HARD DRIVE IN A HARDWARE-RAID VOLUME ...................................90
9.4. HOW TO REPLACE A FAILING HARD DRIVE IN A SOFTWARE-RAID VOLUME.....................................90
10. ADVISED HARDWARE RAID CONTROLLER CARD ......................................................................93
11. INTERFACE CARD SPECIFICATIONS ...............................................................................................94
11.1. ATP-24A/PCI+/2.0 /ATP-24A/PCIE+/2.0 /ATP-24A/PCIE+/3.0.....................................................95
11.2. DST-24B/PCI+/2.0 /DST-24B/PCIE+/2.0..........................................................................................96
11.3. DTP-X0C/PCI+ /DTP-X0C/PCIE+ ....................................................................................................97
11.4. GNU GENERAL PUBLIC LICENSE.................................................................................................98
12. TERMINOLOGY EXPLAINED...............................................................................................................99
13. COPYRIGHT AND TRADEMARKS ....................................................................................................102
14. FCC STATEMENT ..................................................................................................................................102
15. ROHS 2 STATEMENT............................................................................................................................102

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®9
ROAD MAP
APRESA
INSTALLATION
APRESA SERVER
010.04601
010.04605
010.04606
010.04607
APRESA
COMPACT SERVER
010.04700
010.04705
010.04710
010.04715
010.04720
APRESA CH-
EXPANSION
ART 0.046XX
START
SOFTWARE
ONLY !
FULL
SYSTEM! UPGRADE
EXISTING
SYSTEM
BASE
SOFTWARE
INSTALLATION
BY USB-STICK
Y
VOIP
EXPANSION
?
OTHER
BASE SW
LICENSING
N
INTERFACE CARD OR
INTERFACE MODULE
INSTALLATION
S&U
LICENSING
MOUNT ING OF APRESA AND GENERAL INSTALLATION
ISSUES
CONFIGURE APRESA :
USERS / USERGROUPS/
I/F CARD SETTINGS
ETC
TELECOM WIRING
COMMISSIONING
END
CHANNEL & CODEC LICENSING
DWG1129_03
CHANNEL
LICENSING
BASE SW
UPDATE
OPTIONAL
DRIVERS :
- SYNWAY
- IPMI
- STORCLI
INTRODUCTION
TO THE
APRESA
SERVER
HARDWARE
INSTALLATION
I/F CARD / RAID
USB -STICK
PREPARE

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®10
1. Document use
Generally, we distinguish 3 different situations of use of this document. You are advised to follow
the relevant path for your applicable situation as indicated by the roadmap. The numbers in the
roadmap link to the chapters of interest, avoiding unnecessary reading of irrelevant chapters.
At the end of this chapter you find a list of required materials and tooling to do the job right.
1.1. Situations
1.1.1. The “made by VIDICODE” APRESA Server / APRESA Compact.
The APRESA is available on the market as a turn-key product, either a 19” rack or a desktop
version. You will find the APRESA base software already installed and running on the product. The
channel licenses are activated and interface cards will be installed according to your purchase order
by VIDICODE. You are advised to read the introduction and then go directly to the mounting,
software configuration, telecom wiring, and the commissioning sections.
1.1.2. Apresa ‘Software only’
You prefer to use your own choice of hardware for a variety of reasons. In other words, you have
the liberty to select your preferred server manufacturer like HP, Dell, etc. or use a virtual machine.
To support customers in the selection of the server hardware we offer a guiding list in a separate
quick guide, named “CALL RECORDER APRESA, Server Hardware requirements (VC1927).
To install the APRESA software image and do the channel licensing one is advised to follow the
directions as described in the chapter “Software installation”. For the installation of interface cards
in your hardware you must follow the directions of the manufacturer or vendor of that machine.
Finally process the software configuration, telecom wiring and the commissioning section.
1.1.3. Expanding an existing APRESA
If you want to expand an existing APRESA system with additional channels or interface card(s) you
can go to the ‘Expanding Apresa’ chapter.
Existing APRESA systems need channel upgrade when customer business expands after time and
more and more phones needs to be recorded. Adding and configuration of new channels in
software is easy, the main effort here is hardware installation.
Note that the APRESA Compact supports standard (NORAID) hard drive only, and this model is
limited to max. 10 channel VoIP or 8 channel TDM or 8 channel Analog (POTS/audio).

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®11
1.2. Package contents, materials and Tooling
1.2.1. Package contents
Open the package carefully, and verify that the box content is correct
This product has a very high level of flexibility and inherently there is no standard package content.
To help you in checking the delivery use the following table:
Description BOX content
010.04602/3/4
Apresa Software only
010.04607
Apresa standard
Vidicode 1U
010.04601
Apresa standard
Vidicode 4U
010.04605
Apresa Super Micro
1U
010.04606
Apresa Super Micro
4U
010.047XX
Apresa Compact
D8-A8-M10
010.047XX
Apresa Compact
IP5-IP10
APRESA CALL RECORDER
-
1
1
1
1
1
1
MAINS POWER CORD
-
1
1
2
2
1
1
MAINS POWER ADAPTOR
-
-
-
-
-
-
1
KEY (FOR DOOR LOCK)
-
-
1
-
-
-
-
QUICK GUIDE APRESA INSTALLATION
1
APRESA BASE SOFTWARE LICENSE
1
APRESA CLIENT SOFTWARE LICENSE
1
S&U LICENSE
1
GUARANTEE / REGISTRATION FORM
1
CHANNEL LICENSE
QTTY delivered according to customer order
PATCHBOX RJ11/RJ21
1 Pcs / ATP/DST interface card
-
RJ21/RJ21 CABLE, LENGTH=1M
1 Pcs / ATP/DST interface card
RJ45 ‘T’-SPLITTER (TRIPLEXER)
1 Pcs / Trunk DTP interface card
ISDN cable L=2m
1 Pcs / Trunk DTP interface card
If an item is missing or damaged, please contact your local reseller for service.
1.2.2. Advised Materials
We advise you to check the following list of materials before you start installing the system.
* 19” Rack screws and cage nuts * Modular wire 4P/6P/8P
* Modular plugs RJ12, RJ45 * RJ45 T-splitter(s)
* RJ12 T-Splitter(s) * RJ21 cable(s) 3, 5 or 10m length
* Tapping Patch box * RJ45 to BNC adapter
* Coaxial T-Splitter(s) * Etcetera, etc.….
1.2.3. Advised tooling
We advise you to check the following list of tooling of before you start installing the system:
- Standard installers tooling kit;
- RJ modular connector crimp tool

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®12
2. Introduction to the APRESA server
The APRESA server is on the market in several forms:
1. Apresa Standard Vidicode 4U server.
This version is based on industrial-grade PC server components. The housing is fully compatible
with 19-inch server cabinets and will take 4U cabinet space. All basic controls and indicators
are safely placed behind a lockable door. Please note that the door-lock-keys are universal (e.g.
identical between different APRESA units). The Apresa Base Software is pre-installed by
VIDICODE. Note that there is no redundant PSU option available for this model.
2. Apresa Standard Vidicode 1U server.
This version is based on industrial-grade PC server components and fully compatible with 19-
inch server cabinets by taking only 1U cabinet space. No redundant PSU option available.
3. Apresa Super Micro 1U server.
This model is equipped with a redundant PSU and sliding rails as standard.

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®13
4. Apresa Super Micro 4U server.
This model is equipped with a redundant PSU, RAID option
5. The DESKTOP housing, the APRESA-Compact
This version is based on standard quality PC
components build in a HTPC housing. It is
intended to be a small scale and lowest-cost
recording solution for Analog, ISDN2 or TDM.
6. The DESKTOP housing, the APRESA-Compact VoIP
This version is based on standard quality PC
components. It is intended to be a small
scale and lowest-cost recording solution for
VoIP.
All APRESA-options ordered are pre-installed by VIDICODE:
You will find APRESA Base software license, CHANNEL licenses, etc. These are just for your
safekeeping only. You need these items only when you want to re-install the software.
Interface card(s) that are ordered for these machines will be pre-installed.
The following sub-sections describe the various types of housing in functional and specifications
detail.

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®14
2.1. Apresa standard Vidicode 4U server
Back side, X11-SCL-F motherboard.
INTERFACE CARDS
SLOTS
DWG1186_00
I/F CARD#1 I/F CARD#2 I/F CARD#3
0
1
PC ETHERNET
VOIP ETHERNET
4XUSB2.0
(NOT USED)
DISPLAY (NOT USED
SERIAL RS232
(NOT USED)
MAINS
POWER
ENTRY
POWER SWITCH
(NOT ON ALL MODELS)
NOT USED NOT USED
IPMI
NOT USED

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®15
2.1.1. Specifications
2.1.2. Enclosure
TYPE : InWin 19INCH/|4U
COLOR : Black door, Black sheet metal (Textured)
WEIGHT : 15 Kg (approximately, varies with different models)
DIMENSIONS
-Height : 177 mm (4U)
-Width : 482 mm (19” RACK mounting brackets standard)
440 mm (desktop, 19” brackets removed)
-Depth : 540 mm (Including handle bars, exclusive cables)
SLIDING RAIL : NOT available
# 3.5” DRIVES : 2 Pcs INTERNAL
# 5.25” DRIVES : 3 Pcs EXTERNAL
# USB : 2 pcs placed on front / 6pcs at the back (Not used)
COOLING : Front FAN 120mm, chassis FAN 1600 RPM, CPU FAN
ACCESS CTRL : Controls / indicators are placed behind a lockable door
CONTROLS : -RESET Button
-ON/OFF Switch
INDICATORS : -Power
-Hard drive ACTIVITY
2.1.3. Motherboard / CPU / RAM / PSU
MOTHERBOARD : SUPER MICRO X11SCL-F (Socket 1151)
(for all specifications: www.supermicro.com)
CPU : INTEL PENTIUM G5400 2 x 3.7GHz 3MB cache
(for all specifications: www.intel.com)
RAM : DDR4: 4 GBYTE @ 1300MHZ, ECC, Standard
DDR4: 32GBYTE @ 1600MHZ, ECC, Max.
PSU : 300W Standard (not redundant)
500W Optional (not redundant)
(for all specifications: www.supermicro.com)
PCI-e : 3 slots
2.1.4. Hard drive (various configurations possible)
INTERFACE : SATA 6GBIT/SEC
SIZE : 3.5 INCH
RPM : 7200
CACHE : 64MByte
QUALITY GRADE : 24/7
CAPACITY : 1T BYTE (standard configuration)
Optional 1or 2 TBYTE
RAID VOLUMES : Optional, Software RAID1
BACKUP DRIVE : Supported, 1,2 or 3 TB

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®16
2.1.5. Supported PCIe interface card
All cards below are designed for the PCIe X1 card slot.
note: These interface cards will work also in PCIe X4/X8/X16/X32 slots.
ANALOG : SYNWAY TYPE ATP-24A/PCIe+/2.0 : 8CH / 16CH or 24CH
SYNWAY TYPE ATP-24A/PCIe+/3.0 : 8CH / 16CH or 24CH
TDM : SYNWAY TYPE DST-24B/PCIe+/2.0 : 8CH / 16CH or 24CH
ISDN E1/T1 : SYNWAY TYPE DTP-30C/PCIe+/2.0 : 30CH / 1TRUNK
ISDN60 (E1) : SYNWAY TYPE DTP-60C/PCIe+/2.0 : 60CH / 2TRUNK
ISDN120(E1) : SYNWAY TYPE DTP-120C/PCIe+/2.0 : 120CH / 4TRUNK
2.1.6. Environmental specification
TEMPERATURE : +10 …. +35 °C (Operating) or - 10 …. + 65 °C (Storage)
HUMIDITY : 8%-90% No condensing, operating and storage.
2.1.7. Approvals
EMC APPROVAL : EN55022 / EN55024 / FCC15
SAFETY : EN60950

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®17
2.2. Apresa standard Vidicode 1U server
Front side
Back side
2.2.1. Specifications
2.2.2. Enclosure
TYPE : CSE 510-203B (Super Micro)
COLOR : Black sheet metal (Textured)
WEIGHT : 4 Kg (approximately, varies with different models)
DIMENSIONS
-Height : 44.45 mm (1U)
-Width : 482 mm (19” RACK mounting brackets standard)
440 mm (desktop, 19” brackets removed)
-Depth : 287 mm (Including handle bars, exclusive cables)
SLIDING RAIL : Not available/ Not Supported
# 2.5” DRIVES : 1 pcs INTERNAL
# 5.25” DRIVES : not Supported
# USB : 4 pcs at the back (Not used)
COOLING : 2 pcs 40mm chassis FAN 8500 RPM , CPU passive cooling
CONTROLS : -RESET Button
-ON/OFF Button
INDICATORS : -Power
-Hard drive ACTIVITY
2.2.3. Motherboard / CPU / RAM / PSU
MOTHERBOARD : SUPER MICRO X11SCL-F (Socket 1151)
(for all specifications: www.supermicro.com)
CPU : INTEL PENTIUM G5400 2 x 3.7 GHz 3MB cache
(for all specifications: www.intel.com)

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®18
RAM : DDR4: 8 GBYTE @ 1300 MHZ, ECC, Standard
DDR4: 32GBYTE @ 1600MHZ, ECC, Max.
PSU : 200W no redundancy
PCI-e : 3 slots (only 1 slot available externally by use of a riser card)
2.2.4. Hard drive (various configurations possible)
INTERFACE : SATA 6GBIT/SEC
SIZE : 2.5 INCH
RPM : 7200
CACHE : 32MByte
QUALITY GRADE : 24/7
CAPACITY : 1T BYTE (standard configuration)
Optional 2 TBYTE
RAID VOLUMES : not Supported
BACKUP DRIVE : not Supported
2.2.5. Supported PCI interface card
This model has NO support for legacy PCI interface cards.
2.2.6. Supported PCIe interface card
All cards below are designed for the PCIe X1 card slot.
note: These interface cards will work also in PCIe X4/X8/X16/X32 slots.
ANALOG : SYNWAY TYPE ATP-24A/PCIe+/2.0 : 8CH / 16CH or 24CH
SYNWAY TYPE ATP-24A/PCIe+/3.0 : 8CH / 16CH or 24CH
TDM : SYNWAY TYPE DST-24B/PCIe+/2.0 : 8CH / 16CH or 24CH
ISDN E1/T1 : SYNWAY TYPE DTP-30C/PCIe+/2.0 : 30CH / 1TRUNK
ISDN60 (E1) : SYNWAY TYPE DTP-60C/PCIe+/2.0 : 60CH / 2TRUNK
ISDN120(E1) : SYNWAY TYPE DTP-120C/PCIe+/2.0 : 120CH / 4TRUNK
2.2.7. Environmental specification
TEMPERATURE :+10 …. +35 °C (Operating) or - 10 …. + 65 °C (Storage)
HUMIDITY : 8%-90% No condensing, operating and storage.
2.2.8. Approvals
EMC APPROVAL : EN55022 / EN55024 / FCC15
SAFETY : EN60950

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®19
2.3. Apresa Super Micro 1U server
Front side:
Back side:
2.3.1. Specifications
2.3.2. Enclosure
TYPE : Super Micro CSE-813MTQ-R400CB
COLOR : Black front, sheet metal.
WEIGHT : 9 Kg (approximately, varies with different models)
DIMENSIONS
-Height : 44,45 mm (1U)
-Width : 482 mm (19” RACK mounting brackets standard)
440 mm (desktop, 19” brackets removed)
-Depth : 570 mm (Including handle bars, exclusive cables)
SLIDING RAIL : Standard supplied, must be used with cabinet mounting due to only 1U
Height
# 3.5” DRIVES : 4 pcs EXTERNAL BAYS
# 5.25” DRIVES : Not available
# USB : 2 pcs placed on front side, 4 pcs placed on back side
COOLING : 4 pcs chassis FAN 8500 RPM , CPU passive cooling
ACCESS CTRL : On front side
CONTROLS : -RESET Button
-ON/OFF Switch
INDICATORS : -Power
-Hard drive ACTIVITY
2.3.3. Motherboard / CPU / RAM / PSU
MOTHERBOARD : SUPER MICRO X11SCL/F (Socket 1151)
(for all specifications: www.supermicro.com)
CPU : INTEL PENTIUM G5400 3.7 GHz 3MB cache
(for all specifications: www.intel.com)
RAM : DDR4: 4 GBYTE @ 1300 MHZ, ECC, Standard
DDR4: 32GBYTE @ 1600MHZ, ECC, Max.
PSU : 400+400W redundant

INSTALLATION MANUAL APRESA COPYRIGHT ©2011-2021 VIDICODE ®20
PCI : Not Supported
PCI-e : 3 slots (only 1 slot available externally by use of a riser card)
2.3.4. Hard drive (various configurations possible)
INTERFACE : SATA 6GBIT/SEC
SIZE : 3.5 INCH
RPM : 7200
CACHE : 64MByte
QUALITY GRADE : 24/7
CAPACITY : 1 T BYTE (standard configuration)
Optional 1or 2 TBYTE
RAID VOLUMES : Optional: Software RAID1, Hardware RAID1/10
BACKUP DRIVE : Supported, 1,2 or 3 TB
2.3.5. Supported PCIe interface card
All cards below are designed for the PCIe X1 card slot.
Note: These interface cards will work also in PCIe X4/X8/X16/X32 slots.
ANALOG : SYNWAY TYPE ATP-24A/PCIe+/2.0 : 8CH / 16CH or 24CH
SYNWAY TYPE ATP-24A/PCIe+/3.0 : 8CH / 16CH or 24CH
TDM : SYNWAY TYPE DST-24B/PCIe+/2.0 : 8CH / 16CH or 24CH
ISDN E1/T1 : SYNWAY TYPE DTP-30C/PCIe+/2.0 : 30CH / 1TRUNK
ISDN60 (E1) : SYNWAY TYPE DTP-60C/PCIe+/2.0 : 60CH / 2TRUNK
ISDN120(E1) : SYNWAY TYPE DTP-120C/PCIe+/2.0 : 120CH / 4TRUNK
2.3.6. Environmental specification
TEMPERATURE : +10 …. +35 °C (Operating) or - 10 …. + 65 °C (Storage)
HUMIDITY : 8%-90% No condensing, operating and storage.
2.3.7. Approvals
EMC APPROVAL : EN55022 / EN55024 / FCC15
SAFETY : EN60950