Viega Eco Plus User manual

Viega Eco Plus
Model Year built:
8161.45 from 08/2011
en_INT
Viega Eco Plus WC element
Instructions for Use

Viega Eco Plus WC element 2 from 28

Table of contents
1About this instruction for use 4
1.1 Target groups 4
1.2 Labelling of notes 4
1.3 About this translated version 5
2Product information 6
2.1 Intended use 6
2.1.1 Areas of use 6
2.2 Product description 6
2.2.1 Overview 6
2.2.2 Compatible components 7
2.2.3 Sound protection 9
2.2.4 Technical data 10
3Handling 11
3.1 Assembly information 11
3.1.1 Mounting conditions 11
3.1.2 Installation dimensions 12
3.1.3 Required tools 13
3.2 Assembly 13
3.2.1 Mounting WC element 13
3.2.2 Connecting concealed cistern 20
3.2.3 Preparing optional actuation versions 25
3.2.4 Setting the flush volume 26
3.3 Cleaning and maintenance 27
3.4 Disposal 28
Table of contents
Viega Eco Plus WC element 3 from 28

1 About this instruction for use
Trade mark rights exist for this document, further information can be
found at www.viega.com/legal-notices.
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
nHeating and sanitary professionals and trained personnel
nOperators
nDrywall builder
It is not permitted for individuals without the abovementioned training or
qualification to mount, install and, if required, service this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2 Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns against possible life-threatening injury.
WARNING!
This symbol warns against possible serious injury.
CAUTION!
This symbol warns against possible injury.
NOTICE!
This symbol warns against possible damage to property.
Notes give you additional helpful tips.
About this instruction for use
Viega Eco Plus WC element 4 from 28

1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The pertinent national laws, stand-
ards, regulations and guidelines, as well as other technical guidelines,
have priority over German/European guidelines in this manual: The
information is not binding for other countries and territories and should,
as mentioned, be considered as support.
About this instruction for use
Viega Eco Plus WC element 5 from 28

2 Product information
2.1 Intended use
2.1.1 Areas of use
The Viega Eco Plus WC element is suitable for mounting on wall con-
structions in acc. with DIN EN 1996-1-1, DIN 1045 and support profiles
in acc. with DIN 18183.
The Viega Eco Plus sink basin element is suitable for mounting on wall
constructions in acc. with DIN EN 1996-1-1, DIN 1045 and support pro-
files in acc. with DIN 18183.
2.2 Product description
2.2.1 Overview
The WC element is equipped as follows:
Product information
Viega Eco Plus WC element 6 from 28

4
2
3
1
9
6
7
5
8
Fig. 1: Components
1 - Viega Eco Plus WC element
2 - threaded rods for fixing sanitary objects
(gauges for bore hole 180 or 230 mm)
3 - adjustable feet
4 - drain elbow
5 - Four fixing heights for the WC ceramic: 330 mm /
350 mm / 370 mm / 390 mm
6 - Viega concealed cistern 2H
7 - marking 1.0 m above the upper edge of the finished floor
8 - fixing set (not included in the scope of delivery model 8173)
9 - site protection flush actuation
2.2.2 Compatible components
The element is compatible with all common sink basins.
The WC element is compatible with all common WC ceramics, even
with larger projection (barrier-free).
The WC element can be extended by the following compatible compo-
nents:
nfixing element (model 8169 and 8169.2)
nodour extraction via flushing pipe (model 8310.26)
nconnection installation set (model 8350.14)
Product information
Viega Eco Plus WC element 7 from 28

Installation of the WC element into the modular Viegaswift pre-wall
installation system (model 8110.5) is possible.
Mount the components in accordance with the instructions for use of
the components.
The fixing element is suitable for barrier-free installation. Supports and
handles can be mounted on the fixing element. The construction height
of the fixing element is 1130 mm.
The odour extraction is suitable for the reduction of odour nuisance in
inside bathrooms and heavily frequented toilet facilities. The odour
extraction is directly connected to the ventilation system.
The installation set is suitable for the connection of an electrical
actuator. The installation set consists of an empty pipe, a hollow wall
socket and the relative, required clip. The empty pipe connects the
hollow wall socket with the concealed cistern.
Product Name Model
Standard Flush plate Standard 1 8180.1
Visign for Style Flush plate
Visign for Style 10
8315.1
Flush plate
Visign for Style 11
8331.1
Flush plate
Visign for Style 12
8332.1
Flush plate
Visign for Style 12
8332.4
Flush plate
Visign for Style 13
8333.1
Flush plate
Visign for Style 14
8334.1
Functional unit 8332.3
Visign for More Flush plate Visign for More
100
8352.1
Flush plate Visign for More
101
8351.1
Fixing element
Odour extraction
Connection installation set
Compatible flush plates
Product information
Viega Eco Plus WC element 8 from 28

Product Name Model
Flush plate Visign for More
102
8353.1
Flush plate Visign for More
103
8355.1
Flush plate Visign for More
104
8354.1
Visign for Care
sensitive
Flush plate sensitive Visign
for Care
8352.21
Visign for More
sensitive
Flush plate sensitive
Visign for More 100
230 V 8352.11
Flush plate sensitive
Visign for More 100
6.5 V 8352.12
Flush plate sensitive
Visign for More 103
230 V 8355.11
Flush plate sensitive
Visign for More 103
6.5 V 8355.12
Visign for Public Flush plate
Visign for Public 1
8326.1
Flush plate
Visign for Public 2
8327.1
Flush plate
Visign for Public 6
8326.15
Remote actuator
Visign for Public 1
8326.21
Cover plate Visign for Public 8326.9
2.2.3 Sound protection
The WC element fulfils the requirements in acc. with DIN 4109 as well
as the increased requirements in acc. with
DIN 4109 (supplementary sheet 2) and the requirements in acc. with
VDI 4100 SSt I-SSt III.
The sink basin element fulfils the requirements in acc. with DIN 4109 as
well as the increased requirements in acc. with
DIN 4109 (supplementary sheet 2) and the requirements in acc. with
VDI 4100 SSt I-SSt III.
Product information
Viega Eco Plus WC element 9 from 28

2.2.4 Technical data
Small flush volume Factory setting approx. 3 l
Setting range approx. 2.5–3 l
Large flush volume Factory setting approx. 4.5 l
Setting range approx. 4.5–6 l
Flush volume
Product information
Viega Eco Plus WC element 10 from 28

3 Handling
3.1 Assembly information
3.1.1 Mounting conditions
The WC element can be mounted on the following walls:
nmasonry walls in acc. with DIN EN 1996-1-1
nconcreted walls in acc. with DIN 1045
nmetal support profile in acc. with DIN 18183
The WC element may only be mounted on even wall surfaces.
With the construction height, the marked height of the upper edge of
the finished floor must be observed.
The installation depth can be between 130 mm and 200 mm.
The WC element can only be used in combination with wall-hung WCs
(fixing gauges for bore hole 180 mm or 230 mm).
The WC element can be extended by a remote actuator
Visign for Public1 (model 8326.21) or by an electronic actuator (model
8350.31 or 8350.32). The corresponding actuation method must be pre-
pared before the WC element is clad and tiled.
The corresponding empty pipe (included in the scope of delivery of the
remote actuator) is required when preparing the remote actuation
Visign for Public1.
Suitable walls
Construction height
Installation depth
WC ceramic
Actuation
Handling
Viega Eco Plus WC element 11 from 28

3.1.2 Installation dimensions
** only possible with construction height 1130 mm.
Fig. 2: Dimensions
Dimensions
Handling
Viega Eco Plus WC element 12 from 28

3.1.3 Required tools
The following tools are required for the mounting of the WC element:
The following tools are required for the mounting of the sink basin ele-
ment:
nDrill with 10 mm drill bit
nRatchet with sockets: 13 mm / 17 mm
nfork or ring spanner: 10 mm / 13 mm / 17 mm / 19 mm
nfork or ring spanner: 27 mm
3.2 Assembly
3.2.1 Mounting WC element
Masonry and concreted walls
You should use a support bracket (model 8165) when
mounting multiple WC elements with an interval of
> 490 mm. Observe the instructions for use of the support
bracket when mounting.
Handling
Viega Eco Plus WC element 13 from 28

Determine and mark fixing points.
x:
nAt a construction height of 1130 mm, the size is 1110 mm.
nAt a construction height of 980 mm, the size is 960 mm.
Drill holes.
Mount the fixing set with the fork spanner (SW 13).
Align the height of the supports.
Align WC element.
Check WC element on cutting check.
Masonry wall
390
0
0-200
x
x1
200
17
0
1,0 m
0
0-200 mm
x
x
Handling
Viega Eco Plus WC element 14 from 28

Set the installation depth of the pre-wall element (130–200 mm) with
the fork spanner (SW 17).
Attach WC element to the wall.
Attach WC element to the floor using the fork spanner (SW 13) and
the screws and dowels supplied.
Height of threaded rods for WC ceramic
n330 mm
n350 mm
n370 mm
n390 mm
Optional:
Mount Viega Eco Plus fixing element model 8169.2.
Double clad WC element with IFGP cladding panels (model 8055.10)
(2 x 12.5 mm).
13
17
200
0
390
370
350
330
19
0-200
Handling
Viega Eco Plus WC element 15 from 28

If necessary, adjust (pre-mounted) foot depth from 75 mm to
50 mm.
Pull the foot out and turn by 90°.
If necessary, adjust (pre-mounted) foot depth from 75 mm to
50 mm.
Pull the foot out and turn by 90°.
Determine construction height in accordance with the on-site
marking of the upper edge of the finished floor.
Pull WC element up (cutting check) and align.
Mark holes for floor supports and drill.
Tighten supports with the fork spanner (SW 17).
Attach WC element to the support profiles using the screws sup-
plied.
On-site support profile
75 mm
50 mm
1,0m
0
0-200
4x
4x
Handling
Viega Eco Plus WC element 16 from 28

Optional:
Viega Eco Plus Fixing element model 8169.
Optional:
Viega Eco Plus Fixing element model 8169.2.
Double clad WC element with IFGP cladding panels (model 8055.10)
(2 x 12.5 mm).
Line mounting
Handling
Viega Eco Plus WC element 17 from 28

Determine and mark fixing points.
Drill holes.
Mount the mounting rail (model 8001) with the fork spanner (SW 13).
Pull WC element up (cutting check) and align.
Tighten supports with the fork spanner (SW 13).
Attach WC element to the rail.
Optional:
Viega Eco Plus Fixing element model 8169.
Optional:
Viega Eco Plus Fixing element model 8169.2.
0
0-200
840
960
1110
x
0
0-200
840
960
1110
x
13
17
17
200
13
Handling
Viega Eco Plus WC element 18 from 28

The Viega Eco Plus elements must be placed below one another in
line mounting.
Double clad WC elements with IFGP cladding panels (model
8055.10) (2 x 12.5 mm).
Pull WC element up (cutting check) and align.
Corner mounting
1,0m
0
0-200
Handling
Viega Eco Plus WC element 19 from 28

Option 1: Wall mounting
Attach WC element onto the floor and into the wall.
Option 2: Mounting rail
Attach WC element to the mounting rail (SW 13).
Double clad WC element IFGP cladding panels (model 8055.10)
(2 x 12,5 mm).
3.2.2 Connecting concealed cistern
If there is not enough space when pressing the water connection, the
water connection can be pulled out to the side.
13
13
13
13
Laterally extricable water connection
Handling
Viega Eco Plus WC element 20 from 28