Viega Visign for Style 20 8610.1 User manual

for concealed cisterns 3H, concealed cisterns 3L, concealed cis‐
terns 3F, concealed cisterns 3S
Model Year built:
Modell: 8610.1 from 09/2018
en_INT
WC flush plate forPrevista
Visign for Style 20
Instructions for Use

WC flush plate forPrevista Visign for Style 20 2 from 17

Table of contents
1About these instructions for use 4
1.1 Target groups 4
1.2 Labelling of notes 4
1.3 About this translated version 5
2Product information 6
2.1 Standards and regulations 6
2.2 Intended use 6
2.2.1 Areas of use 6
2.3 Product description 7
2.3.1 Overview 7
2.3.2 Technical data 7
3Handling 8
3.1 Assembly information 8
3.1.1 Required material and tools 8
3.2 Assembly 8
3.2.1 Prepare cistern 8
3.2.2 Mounting the flush plate 9
3.3 Commissioning 15
3.3.1 Setting the flush volume 15
3.4 Errors, faults and remedy 16
3.5 Care and maintenance 17
3.5.1 Care tips 17
3.6 Disposal 17
Table of contents
WC flush plate forPrevista Visign for Style 20 3 from 17

1 About these instructions for use
Trade mark rights exist for this document; for further information, go to
viega.com/legal.
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
nHeating and sanitary professionals and trained personnel
nConsumers
Individuals without the abovementioned training or qualification are not
permitted to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2 Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns of possible life-threatening injury.
WARNING!
This symbol warns of possible serious injury.
CAUTION!
This symbol warns of possible injury.
NOTICE!
This symbol warns of possible damage to property.
This symbol gives additional information and hints.
About these instructions for use
WC flush plate forPrevista Visign for Style 20 4 from 17

1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand‐
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
WC flush plate forPrevista Visign for Style 20 5 from 17

2 Product information
2.1 Standards and regulations
The following standards and regulations apply to Germany / Europe and
are provided as a support feature.
Regulations from section: Technical data
Scope / Notice Regulations applicable in Ger‐
many
Flush flow DIN 3265
Noise class DIN 4109
2.2 Intended use
2.2.1 Areas of use
The flush plate is intended for the actuation of flushes on Viega con‐
cealed cisterns.
Installation is only possible in the following Viega concealed cisterns:
nConcealed cistern 3H
n3L concealed cistern
nConcealed cistern 3F
nConcealed cistern 3S
Suitable cisterns
Product information
WC flush plate forPrevista Visign for Style 20 6 from 17

2.3 Product description
2.3.1 Overview
1
2
34
Fig. 1: Scope of delivery
1 Installation frame
2 flush plate
3 actuating rods
4 retaining bolt
2.3.2 Technical data
The flush volumes for the flush actuation are:
nSmall flush volume: approx. 2–4 litres
nLarge flush volume: approx. 3.5–7.5 litres
For the setting of the flush see Ä Chapter 3.3.1 „Setting the flush
volume“ on page 15.
Flush volume
Product information
WC flush plate forPrevista Visign for Style 20 7 from 17

3 Handling
3.1 Assembly information
3.1.1 Required material and tools
The following tools are required for mounting:
ncutting knife
3.2 Assembly
3.2.1 Prepare cistern
Requirements:
nThe cistern is fitted into the pre-wall.
nThe pre-wall is tiled.
Cut into the sticky tape of the shaft cover.
Remove the shaft cover.
Tool
Handling
WC flush plate forPrevista Visign for Style 20 8 from 17

Cut into the corners of the revision shaft.
Fold the sides of the revision shaft outwards up to the tile level and
snap them off.
3.2.2 Mounting the flush plate
Turn the cover plate lock 90° in counter-clockwise direction.
Remove the cover plate.
4x
Handling
WC flush plate forPrevista Visign for Style 20 9 from 17

Close the corner valve.
Loosen the flexible hose at the filling valve.
INFO! For setting the flush volume, see
Ä Chapter 3.3.1 „Setting
the flush volume“ on page 15.
Open the corner valve for a few seconds to flush the pipe.
Close the corner valve.
Handling
WC flush plate forPrevista Visign for Style 20 10 from 17

Connect the flexible hose to the filling valve.
Re-open the corner valve.
INFO! Check the filling valve for leak tightness.
Insert the cover plate into the cistern.
Turn the cover plate lock by 90° in a clockwise direction.
Handling
WC flush plate forPrevista Visign for Style 20 11 from 17

Put on the installation frame.
Insert the retaining bolts.
Turn the retaining bolts by 90° in a clockwise direction.
Align the installation frame.
To fix the retaining bolts, turn safety rings in a clockwise direction.
Handling
WC flush plate forPrevista Visign for Style 20 12 from 17

INFO! For installation from the front into the concealed cisterns
3H, 3L, 3S.
Determine the distance for the actuating rods.
nA: 30–50 mm
nB: 10–30 mm
nC: 10 mm
If necessary, cut the actuating rods to length.
INFO! For installation into concealed cistern 3F.
Determine the distance for the actuating rods.
nA: 50–60 mm
nB: 30–50 mm
nC: 10–30 mm
If necessary, cut the actuating rods to length.
A C
-
A B C
A C
-
A B C
Handling
WC flush plate forPrevista Visign for Style 20 13 from 17

INFO! For installation from above into the concealed cisterns 3L,
3S.
Determine the distance for the actuating rods.
nA: 20–40 mm
nB: 10–20 mm
If necessary, cut the actuating rods to length.
Insert the actuating rods as far as they will go.
Align the actuating rods.
Rotate the actuating rods 90° in clockwise direction.
A B
+
A B
90° 90°
Handling
WC flush plate forPrevista Visign for Style 20 14 from 17

Mount the flush plate.
ðThe flush plate is mounted.
3.3 Commissioning
3.3.1 Setting the flush volume
Fold the tabs forward.
Lift the drain valve.
Handling
WC flush plate forPrevista Visign for Style 20 15 from 17

Remove the drain valve through the revision opening.
Set the large flush volume at the drain valve.
Set the small flush volume at the drain valve.
3.4 Errors, faults and remedy
Error Cause Remedy
The WC does not flush. The cistern is not yet completely
full.
Wait until the cistern is sufficiently
full.
There is no water in the cistern.
The corner valve is closed.
Open the corner valve.
The WC flush runs through. The seal at the filling valve is dirty
or damaged.
Check the seal, replace if neces‐
sary.
The seal at the drain valve is dirty
or damaged.
Check the seal, replace if neces‐
sary.
--
Handling
WC flush plate forPrevista Visign for Style 20 16 from 17

3.5 Care and maintenance
3.5.1 Care tips
Use normal soap or a mild cleaning agent for regular care and preven‐
tion of lime scale on the flush plate. Under no circumstances should
scouring agent or scratching objects be used.
Strong stains can be removed using typical household cleaner. Rinse
the detergent thoroughly with clear water after the prescribed exposure
time. There should be no residue on the components.
3.6 Disposal
Separate the product and packaging materials (e. g. paper, metal,
plastic or non-ferrous metals) and dispose of in accordance with valid
national legal requirements.
Handling
WC flush plate forPrevista Visign for Style 20 17 from 17