Viega 4914.11 User manual

Model Year built:
4914.11 from 01/2010
en_INT
Advantix Top bathroom drain
Instructions for Use

Advantix Top bathroom drain 2 from 26

Table of contents
1About these instructions for use 4
1.1 Target groups 4
1.2 Labelling of notes 4
1.3 About this translated version 5
2Product information 6
2.1 Standards and regulations 6
2.2 Intended use 6
2.2.1 Areas of use 6
2.2.2 Media 7
2.2.3 Drainage capacity 7
2.3 Product description 7
2.3.1 Overview 7
2.3.2 Technical data 8
2.4 Information for use 8
2.4.1 Installation variations 8
2.4.2 Sealing 9
2.4.3 Fire protection 13
2.5 Required accessories 13
3Handling 15
3.1 Assembly information 15
3.1.1 Important note 15
3.1.2 Installation dimensions 15
3.1.3 Tools and materials 15
3.2 Assembly 16
3.2.1 Construction and water seal level 16
3.2.2 Mount base unit 18
3.2.3 Sealing the drain 22
3.2.4 Mounting the top 24
3.3 Care 25
3.3.1 Care tips 25
3.3.2 Cleaning the drain 25
3.4 Disposal 26
Table of contents
Advantix Top bathroom drain 3 from 26

1 About these instructions for use
Trade mark rights exist for this document, further information can be
found at viega.com/legal .
1.1 Target groups
The information in this instruction manual is directed at the following
groups of people:
nHeating and sanitary professionals and trained personnel
nTilers
nConsumers
It is not permitted for individuals without the abovementioned training or
qualification to mount, install and, if required, maintain this product. This
restriction does not extend to possible operating instructions.
The installation of Viega products must take place in accordance with
the general rules of engineering and the Viega instructions for use.
1.2 Labelling of notes
Warning and advisory texts are set aside from the remainder of the text
and are labelled with the relevant pictographs.
DANGER!
This symbol warns against possible life-threatening injury.
WARNING!
This symbol warns against possible serious injury.
CAUTION!
This symbol warns against possible injury.
NOTICE!
This symbol warns against possible damage to property.
Notes give you additional helpful tips.
About these instructions for use
Advantix Top bathroom drain 4 from 26

1.3 About this translated version
This instruction for use contains important information about the choice
of product or system, assembly and commissioning as well as intended
use and, if required, maintenance measures. The information about the
products, their properties and application technology are based on the
current standards in Europe (e. g. EN) and/or in Germany
(e. g. DIN/DVGW).
Some passages in the text may refer to technical codes in Europe/
Germany. These should serve as recommendations in the absence of
corresponding national regulations. The relevant national laws, stand-
ards, regulations, directives and other technical provisions take priority
over the German/European directives specified in this manual: The
information herein is not binding for other countries and regions; as said
above, they should be understood as a recommendation.
About these instructions for use
Advantix Top bathroom drain 5 from 26

2 Product information
2.1 Standards and regulations
The following standards and regulations apply to Germany / Europe.
National regulations can be found on the relevant web site of your
country at viega.com/standards .
Regulations from section: Sealing
Scope / Notice Regulations applicable in Ger-
many
Stress class of the underground,
as well as suitable bonded sealing
ZDB-Merkblatt 8/2012
Stress class of the underground,
as well as suitable bonded sealing
Leitfaden zur Abdichtung im Ver-
bund (AIV)
Approved bonded sealings with
proof of practicability in keeping
with building law for stress
classes A and AO
ETAG 022 T1
Approved bonded sealings with
proof of practicability in keeping
with building law for stress
classes A, B and C
DIBt-Bauregelliste A, Teil 2 des
DIBt und Prüfgrundsätze für
Abdichtungen im Verbund
(PG AIV-F)
Permitted bonded sealings EN 14891
Regulations from section: Media
Scope / Notice Regulations applicable in Ger-
many
Typical domestic wastewater DIN 1986-3
2.2 Intended use
2.2.1 Areas of use
The drain is designed for small to medium volumes of water, which
occur in e. g. residential building.
Technical information, see ÄChapter 2.3.2 „Technical data“ on page 8 .
Product information
Advantix Top bathroom drain 6 from 26

2.2.2 Media
nThe short-term temperature of the wastewater may reach up to
95° C. The temperature must be considerably lower in constant
operation.
nThe pH value must be higher than 4 but lower than 10.
It is not permitted to introduce wastewater which would damage the
product material.
2.2.3 Drainage capacity
The drainage capacity is dependent on the chosen installation height.
The drainage capacity is 0,95 l/s up to 1 l/s with horizontal DN 50 drain
support..
2.3 Product description
2.3.1 Overview
1
2
3
5
7
4
6
Fig. 1: Scope of delivery model 4914.11
1 - top with grate, can be cut to length
2 - plug-in adapter for top 150 mm
3 - immersion pipe
4 - flange for the application of the conventional sealing
Product information
Advantix Top bathroom drain 7 from 26

5 - base unit
6 - floor piece
7 - clamping ring
2.3.2 Technical data
Nominal width [DN] (drain
support)
50
Drainage capacity
ÄChapter 2.2.3 „Drainage capacity“
on page 7
Dimensions and installa-
tion height
ÄChapter 3.1.2 „Installation dimen-
sions“ on page 15
Water head seal 35 up to 50 mm
Load class K = 300 kg
2.4 Information for use
2.4.1 Installation variations
The mounting of the drain in a bare concrete floor is as follows:
nThe drain is placed in a floor recess and then cast-in.
Installing in a bare concrete floor
Fig. 2: General installation example – Floor
recess
Product information
Advantix Top bathroom drain 8 from 26

During the mounting on the floor, the drain is integrated into the floor
construction. At the same time, it can e. g. be integrated into the level-
ling screed or heat insulation. If necessary, a vertical drainpipe can be
led through a drill hole in the floor at the same time.
NOTICE!
The creation of a floor recess must be agreed with the fol-
lowing people:
– a structural engineer
– the on-site fire protection inspector or the specialist
engineer for fire protection
If necessary, proof of compliance with building code or an
expert's report must exist.
2.4.2 Sealing
The drain can be sealed both conventionally as well as with bonded
sealing.
Depending on the type of sealing, you will require the relevant equip-
ment set ÄChapter 2.5 „Required accessories“ on page 13 .
Mounting on a floor
Fig. 3: General mounting example – Mounting
on the floor
Product information
Advantix Top bathroom drain 9 from 26

The flange of the drain is intended for conventional sealing. To be able
to seal the drain conventionally, you require a suitable sealing collar and
a clamping ring with which the cuff is secured
ÄChapter 2.5 „Required
accessories“ on page 13 .
Fig. 4: Construction diagram of a conventional sealing
NOTICE!
Not suitable for floor-level showers
Conventional sealing is not recommended with floor-level
showers, because dampness can enter the screed and
damp proof layer.
The bonded sealing should be used in the case of floor-
level showers.
Principle
Traditionally, sealing is made using bitumen or EPDM sealing collars.
The sealing collars are laid directly onto the raw concrete or heat insula-
tion. This process has proved itself to be particularly effective for sealing
balconies, patios, floor installation panels and cellar floors. In addition,
sealing collars are often used as an additional second sealing layer
below the bonded seal.
The following components are required for the installation of a drain
with conventional sealing:
nDrain
nClamping ring with sealing collar for EPDM and bitumen sealing
lanes
Information for processing
The sealing collar is coated with EPDM on the one side and with
bitumen on the other side
Place the sealing collar on the drain and fasten it with the flange. It
depends on the sealing collar used which material layer of the sealing
collar is placed facing up. You can find more information in the
mounting instructions of the sealing flange.
Conventional sealing
Product information
Advantix Top bathroom drain 10 from 26

To protect against moisture penetration, apply sealing foils, which are to
be processed in liquid state, directly below the tiles on screed and
walls. The determination of the stress class and the underground as well
as the selection of the suitable bonded sealing must be carried out in
compliance with the valid standards and regulations, see: linktarget [Normen
EWT] doesn't exist but @y.link.required='true'.
Bonded sealing can be carried out with the help of a suitable stacking
element. You have the possibility to double seal, using conventional and
bonded sealing or only using bonded sealing.
Fig. 5: Diagram of a bonded seal with stacking element
Bonded sealing
Product information
Advantix Top bathroom drain 11 from 26

Careful planning is required for professional sealing. In addition,
depending on the individual dampness wear class and the type of foun-
dation, a suitable BS system with a building regulations certificate of
suitability must be chosen.
Furthermore, the following factors should be taken into account:
nDrain or shower channel must be equipped with a special flange,
which has an adhesive surface and a width of at least 30 mm.
nFor bridging the material change from drain to screed, either a suit-
able sealing collar or sealing tape designed for overlapping with the
BS over a width of at least 50 mm must be used.
nThe screed must be laid at a minimum incline of 1–2 %.
nThe installation must be carried out properly in acc. with the
mounting instructions and the manufacturer's information.
1
9 8 7 6
2 3 4 5
Fig. 6: Construction diagram of the bonded seal - min. screed incline 1–2 %
1 - Grate
2 - Top piece with adhesive flange
3 - Tile
4 - Tile cement
5 - Bonded sealing
6 - Screed
7 - Sealing collar
8 - Mat
9 - Adhesive flange
In connection with suitable drains, only approved bonded sealings with
proof of practicability in keeping with building law may be used. See link-
target [Normen EWT] doesn't exist but @y.link.required='true'.
Information regarding the procedure can be found in the instructions for
use of the corresponding product.
Important note
Permitted bonded seals
Product information
Advantix Top bathroom drain 12 from 26

2.4.3 Fire protection
Advantix shower channels and drains can both be fitted to be fire proof.
The R120 pipe lead-in can be used for this purpose in the floor con-
struction. In this way, a fire resistance time of up to 120 minutes can be
achieved.
Fig. 7: Example: fire protection pipe lead-in
Mounting instruction of the R120 pipe lead-in see model 4923.5,
Art.-No. 491 673.
2.5 Required accessories
Advantix tops are available in a number of sizes and variations. You can
also only buy an Advantix top frame and then purchase a suitable
designer grate separately (see catalogue).
Top
Product information
Advantix Top bathroom drain 13 from 26

The drain can be fitted with a sieve insert (model 4923.1) to collect dirt.
If a conventional sealing is to be made, a suitable sealing collar and a
clamping ring will be required.
You will find a corresponding set in the catalogue (model 4998.3).
If a bonded sealing is to be applied, a suitable stacking element with
sealing collar is required.
You will find a corresponding set in the catalogue (model 4994).
Sieve insert
Accessories for the conventional sealing
Accessories for the bonded sealing
Product information
Advantix Top bathroom drain 14 from 26

3 Handling
3.1 Assembly information
3.1.1 Important note
Before assembly:
nCheck if the drainage capacity of the drain is sufficient for the arising
water volume linktarget [Ablaufleistung] doesn't exist but @y.link.required='true'.
nCheck if the installation height of the drain corresponds with the
planned floor construction.
nEnsure that the required connection line is installed with the neces-
sary incline to the planned installation location.
nIf necessary, supply the required accessories
ÄChapter 2.5
„Required accessories“ on page 13 .
During assembly:
nObserve installation dimensions.
nDecide whether or not a backflow seal is required in the insertion
part of the top.
After assembly:
nThe drain flange must be fully lined with mortar.
3.1.2 Installation dimensions
Fig. 8: Dimensional drawing model 4914.11
3.1.3 Tools and materials
nif necessary, sealing collar, clamping ring, fitting screws
nTop with grate, if not included in scope of delivery
nif necessary, stacking element for bonded sealing model 4944
nMaterial for securing the drain
Required material
Handling
Advantix Top bathroom drain 15 from 26

3.2 Assembly
3.2.1 Construction and water seal level
Determine screed height.
At a desired installation height of ≥ 110 mm upper edge
sealing flange the floor piece remains in the delivery condi-
tion.
The water seal level is 50 mm and the immersion pipe
length 48 mm.
Loosen clamping ring with screwdriver.
Remove clamping ring and push floor piece in by one ring
(1 x 10 mm).
Installation height 101–110 mm
Handling
Advantix Top bathroom drain 16 from 26

Align the floor in such a way that the arrows point towards the drain
pipe.
Secure floor with clamping ring.
Tighten the screw of the clamping ring with max. 2.5 Nm ±0.2 Nm.
Alternatively, tighten the end of the clamping ring up to or between
the markings.
ðThe water seal level is 40 mm and the immersion pipe length
38 mm.
Loosen clamping ring with screwdriver.
Installation height 90–100 mm
Handling
Advantix Top bathroom drain 17 from 26

Remove clamping ring and push floor piece in by two rings
(2 x 10 mm).
Align the floor in such a way that the arrows point towards the drain
pipe.
Secure floor with clamping ring.
Tighten the screw of the clamping ring with max. 2.5 Nm ±0.2 Nm.
Alternatively, tighten the end of the clamping ring up to or between
the markings.
ðThe water seal level is 35 mm and the immersion pipe length
33 mm.
3.2.2 Mount base unit
A few points must be observed to integrate the drain into the floor con-
struction properly. For this reason, proceed as follows to prepare the
drain for subsequent work:
Handling
Advantix Top bathroom drain 18 from 26

Requirements
nA pipe to the planned drainage position is already in place for the
connection to the waste water system.
nThe drain pipe has an internal sealing lip.
Position the drain in the floor and align horizontally.
Insert yellow protective plug.
Push the drain support into the drain pipe completely.
Secure the drain in such a way that it cannot shift when the subse-
quent works are applied.
Most importantly, it must be ensured that the drain does not float
when the concrete or screed is poured in.
NOTICE!
Product damage due to improper installation
If hollow spaces occur during the lining of the drain, leaks
may occur when pressure is applied.
Inform the subsequent workers that the drain must be fully
lined and that there must be no hollow spaces.
Installing in a bare concrete floor
Installation on a bare concrete floor
Handling
Advantix Top bathroom drain 19 from 26

No building seal with sealing collar is possible with this
installation method.
Requirements
nA pipe to the planned drainage position is already in place for the
connection to the waste water system.
nThe drain pipe has an internal sealing lip.
Position the drain on the floor and align horizontally.
Insert yellow protective plug.
Push the drain support into the drain pipe completely.
Calculate FFL and cut top flush to length.
Install plug-in adapter with backflow seal.
Insert top.
Handling
Advantix Top bathroom drain 20 from 26